Ampro Corporation 486E - Manual (Page 62)

Little Board™/486e Technical Manual
2–46
Network OS Drivers
Ethernet drivers provided on the Utilities diskette are listed in Table 2–34. The table which driver
to use for various NOSs.
Driver installation procedures vary from one network operating system to another. No detailed
description can be given here. Follow the instructions that come with the network operating system
you choose for your system.
Table 2–34. Ethernet Drivers
Program Name Vendor Function Driver Name
Netware 4.1 Server
Driver
Novell ODI on server SMC9000.LAN
Netware 3.11 Server
Driver
Novell ODI on server SMC9000.LAN
Netware 2.2 Server
Driver
Novell IPX on server SMC9000.LAN
Netware ODI
Workstation Driver
Novell ODI on workstation SMC9000.COM
OS/2 ODI Workstation
Requester
Novell ODI on workstation SMC9000.SYS
LAN Manager Microsoft NDIS for DOS SMC9000.DOS
LAN Manager Microsoft NDIS on Windows
for Workgroups
SMC9000.DOS
LAN Manager Microsoft NDIS for Windows
NT 3.1 and NT 3.5
SMC9000.SYS
LAN Manager Microsoft NDIS for OS/2 on
server
SMC9000.OS2
Controlling the Ethernet LAN Interface Directly
Of course, you can create any application or software driver to directly control the SMC Ethernet
controller chip used on the Little Board/486e CPU. Ampro has designed the interface to conform to
the standards and recommendations set forth by the controller chip manufacturer. To develop a
custom driver, you need detailed information on the SMC9000-series controller chip, which is
available from SMC. Contact SMC at the following address:
SMC
80 Arkay Drive
Hauppauge, NY 11788
Phone: (516) 435-6000
FAX: (516) 231-6004
www.smc.ru