Alpine MOBILE MULTIMEDIA STATION IVA-D900 User Manual

Page 74

Advertising
background image

72

-EN

1 Antenna Extension Cable

2 Digital Output Terminal (Optical)

Use when combining fiber digital input compatible
products.

3 Remote Control Interface Connector

Connect to the remote control interface box.

4 Power Supply Connector

5 DC/DC Converter

• Do not install the converter at a location subjected to water

such as under the floor mat or air conditioner. This may cause
a malfunction.

• Do not bundle the DC/DC converter cable with other audio

cables. Doing so may induce noise into your system.

• Keep the DC/DC converter away from the Antenna cables and

the rear side of the unit, otherwise noise may be generated
when receiving radio broadcast.

6 Battery Lead (Yellow)

Connect this lead to the positive (+) post of the vehicle's
battery.

7 Fuse Holder (10A)

8 Ground Lead (Black)

Connect this lead to a good chassis ground on the
vehicle. Make sure the connection is made to bare metal
and is securely fastened using the sheet metal screw
provided.

9 Remote Control Output Lead (White/Brown)

Connect this lead to the remote control input lead. This
lead outputs the controlling signals from the remote
control.

! Remote Control Input Lead (White/Brown)

Connect the external Alpine product to the remote control
output lead.

" Reverse Lead (Orange/White)

Use only when a back-up camera is connected. Connect
to the plus side of the car's reverse lamp that lights when
the transmission is shifted into reverse (R).
Switches the video picture to the back-up camera. This is
linked with putting the car into reverse (R).

# Display Output Terminal

$ Remote IN/OUT Terminal

% Ai-NET Connector

Connect this to the output or input connector of other
product (CD Changer, Equalizer, etc.) equipped with Ai-
NET.

& Antenna Receptacle

( System Switch

When connecting an equalizer or divider using Ai-NET
feature, place this switch in the EQ/DIV position. When no
device is connected, leave the switch in the NORM
position.

• Be sure turn the power off to the unit before changing the

switch position.

) Remote Turn-On Lead (Blue/White)

Connect this lead to the remote turn-on lead of your
amplifier or signal processor.

~ Power Antenna Lead (Blue)

Connect this lead to the +B terminal of your power
antenna, if applicable.

+ Audio Interrupt In Lead (Pink/Black)

, Parking Brake Lead (Yellow/Blue)

Connect this lead to the power supply side of the parking
brake switch to transmit the parking brake status signals
to the IVA-D900.

- Foot Brake Lead (Yellow/Black)

Connect to the vehicle's foot brake lead or brake lamp
lead.

. Switched Power Lead (Ignition) (Red)

Connect this lead to an open terminal on the vehicle's
fuse box or another unused power source which provides
(+) 12V only when the ignition is turned on or in the
accessory position.

/ Fuse Holder (15A)

: Right Front (+) Speaker Output Lead (Gray)

; Right Front (–) Speaker Output Lead (Gray/Black)

< Right Rear (–) Speaker Output Lead (Violet/Black)

= Right Rear (+) Speaker Output Lead (Violet)

> Left Rear (+) Speaker Output Lead (Green)

? Left Rear (–) Speaker Output Lead (Green/Black)

@ Left Front (–) Speaker Output Lead (White/Black)

[ Left Front (+) Speaker Output Lead (White)

\ Monitor Extension Cable (Included)

] Subwoofer output Terminal

Connect the input lead of an amplifier for the subwoofer to
this terminal.

^ Rear output Terminal

Use when connecting an amplifier.

_ Front output Terminal

Use when connecting an amplifier.

To prevent external noise from entering the audio system.
• Locate the unit and route the leads at least 10 cm away from

the car's electrical harness.

• Keep the battery power leads as far away from other leads as

possible.

• Connect the ground lead securely to a bare metal spot (remove

any paint, dirt or grease if necessary) of the car chassis.

• If you add an optional noise suppressor, connect it as far away

from the unit as possible. Your Alpine dealer carries various
noise suppressors, contact them for further information.

• Your Alpine dealer knows best about noise prevention

measures so consult your dealer for further information.

Advertising