ADC UD-50 - Manual (Page 35)

33
Telephone: (508) 678-9000 Fax: (508) 678-9447
Standard (Non-Hi/Lo) Burner Assembly
Illus. No. Part No. Qty. Description
1 --------* 1 Standard (non-hi/lo) Burner Assembly Complete
(includes illus. nos. 1 through 20 and 22 through 29)
Refer to Globar
® Burner Assembly Listing on page 56
804005 1 Non-Heat Reclaimer Burner Box ONLY
804008 1 Heat Reclaimer Burner Box ONLY
2 150309 2 #10-16 x 1/2” Hex Head TEK Crimptite Screw
3 150001 2 #6-32 x 1/2” Phillips Round Head Machine Screw
4 130401 1 330° Hi-Limit ONLY
5 319704 1 Hi-Limit Mounting Bracket
6 151000 2 #6-32 Pal Nut
7 152001 1 #8-32 Hex Nut
8 153012 1 #8 Star Washer
9 130500 1 IR Sensor ONLY
10 150108 1 #8-32 x 1/2” Phillips Pan Head Machine Screw
11 150309 2 #10-16 x 1/2” Hex Head TEK Crimptite Screw
12 802706 1 IR/Globar ® Mounting Bracket
(for non-heat reclaimer models Only)
802705 1 IR/Globar ® Mounting Bracket
(for heat reclaimer models Only)
13 150108 2 or 3 #8-32 x 1/2” Phillips Pan Head Machine Screw
14 153000 2 or 3 #8 Steel Burr
15 151001 2 or 3 #8-32 Pal Nut
16 141105 2 or 3 Large Tube Burner
17 150002 1 6-32 x 1” Phillips Round Head Machine Screw
18 153017 1 #6 Steel Burr
19 128910 1 Globar ® ONLY
20 151000 1 #6-32 Pal Nut
21** -------- 2 or 3 Burner Orifice
(refer to Globar
® Burner Orifice Listing on page 56)
22 141203 1 1/2” (3-port) Manifold
(for non-heat reclaimer models Only)
141205 1 1/2” (2-port) Manifold
(for heat reclaimer models Only)
23 318700 1 Pipe Bracket (bent)
24 150309 2 #10-16 x 1/2” Hex Head TEK Crimptite Screw
25 140005 1 1/2” Globar ® (natural gas) Gas Valve
140411 1 1/2” Valve Liquid Propane (L.P.) Conversion Kit
26 318700 2 Pipe Bracket (bent)
27 150309 4 #10-16 x 1/2” Hex Head TEK Crimptite Screw
28 142809 1 1/2” x 29-1/8” Pipe
29 881367 1 1/2” Union Shut Off with Tail Piece
--- --------** 1 Liquid Propane L.P.) Conversion Kit
(refer to Globar
® L.P. Conversion Kit Listing on page 56)
--- 410001 1 1/2” Allen Wrench
* Burner orifices are not included and must be ordered separately.
** Consult factory for elevations over 2,000 feet.
for Globar ® Ignition Models ONLY