Asante Technologies 3524 Series User Manual

Page 69

Advertising
background image



69

•

The IP group -- This group contains counters for Internet Protocol Traffic. It contains as a sub-
group the IP Net-to-Media table, which tracks MAC-to-IP address mappings

•

The ICMP group -- keeps statistics for Internet Control Protocol datagrams

•

The TCP group -- keeps statistics for the Transmission Control Protocol, including a table of
established connections

•

The UDP group -- keeps statistics for the User Datagram Protocol

•

The EGP group -- keeps statistics on the Exterior Gateway Protocol

•

The SNMP group -- keeps statistics on the Simple Network Management Protocol


The following Bridge MIBs are supported:

•

The dot1dBase group -- This group contains the objects that apply to all types of bridges

•

The dot1dStp group -- This group contains objects to manage the Spanning Tree Protocol

•

The dot1dTp group -- This group contains objects that describe the bridge's function as a
transparent bridge

•

The dot1dStatic group -- This group allows the creation and management of static entries in the
bridge's forwarding table


The switch supports the Ethernet-like MIB:

•

The Ethernet-like Statistics group -- This group records statistics relevant to Ethernet’s CSMA/CD
access method


The following RMON MIBs are supported:

•

The Ethernet Statistics group -- this group records statistics for each Ethernet interface on the
switch, including records of frame sizes received

•

The Ethernet History group -- this group collects statistics for each interface in buckets covering a
user-selectable time period

•

The Alarm group -- the alarm group allows you to set a threshold on a counter, and to configure a
response if the threshold is crossed in either a rising or falling direction

•

The Event group -- the event group allows you to configure a response when an alarm is triggered.
Responses include a trap or log entry


For more information on SNMP, refer to your SNMP software user’s manual.

Advertising