Step 1 - discover switches, 6 discovery requirements for switches, Table 6 – HP Storage Essentials NAS Manager Software User Manual
Page 61
Storage Essentials 5.00.01 User Guide
31
Step 1 - Discover Switches
This section describes the following:
•
SMI-S Switches Must Be Removed and Rediscovered After Upgrading
•
•
•
•
Discovering Sun StorEdge and QLogic Switches
•
Changing the SNMP Trap Listener Port for Sun StorEdge Switches
•
Discovering McDATA and EMC Connectrix Switches
•
(Discovery from SE Only) Excluding McDATA and EMC Connectrix Switches from Discovery
The following table provides an overview of the discovery requirements for switches.
Table 6
Discovery Requirements for Switches
Element
Discovery Requirements
Additional Information
Brocade switches
Enter the IP address/DNS name,
user name and password of the
Brocade switch to discover it. The
user name (default admin) and
password must be for the Admin
Account.
See ”
CNT switches
Enter the IP address and the port
number for the InVsn Software that
manages the switch.
See ”
Cisco switches
(SMI-S)
Enter the IP address/DNS name of
the Cisco switch as well as the user
name and password of the switch.
All SMI-S switches require a user
name and password.
See ”
Cisco switches
(SNMP)
Enter the IP address/DNS name of
the Cisco switch. You do not need
to enter a password if you discover
it in HP SE. HP SIM requires a
password.
See ”
QLogic switches
(SMI-S)
Enter the IP address/DNS name of
the QLogic SMI-S switch as well as
the user name and password of the
switch. All SMI-S switches require a
user name and password.
See ”