HP StorageWorks Ultra Density Optical Storage - Manual (Page 19)

Using the Software
19 UDO Driver Version 1.03 User’s Guide
Note: The Capacity field shows the formatted size of the UDO disk. This is the per side
size of the double-sided cartridge.
5. From the File system field, select the UDF version that you want to use.
Note: For the widest interchange, use UDF version 1.02. For interchange with the
newest operating systems, use UDF version 2.01.
6. Leave the Allocation unit size field empty. This option is always grayed out
because the UDF specification requires this to be set to the physical block size
of the media.
7. Assign a name in the Volume label field. The name can be up to 256
characters in length.
8. Under Format options, select the Quick format box to do a high-level
format of the file system only.
Note: If you uncheck this option, the format will do a full low-level certification of the
media where the drive checks every sector on the disk. This process will take upwards of
three hours per side.
9. Click on Start. The progress bar in the lower part of the dialog box indicates
that formatting is taking place.
10. A window appears indicating that formatting is complete. Click on OK.
The format is complete. Use the disk icon as you would any other volume. You
can drag and drop files to the disk, erase files from it, do Save and Save As
functions from applications, and change file formats.