HP Integrity rx3600 Server - Manual (Page 18)

<property id='SpeedDuplex' value='Auto/Auto'/>
<property id='NetworkAddress' value='' />
</nic>
<!-- <nic> element 6 -->
<nic>
<property id='SpeedDuplex' value='Auto/Auto'/>
<property id='NetworkAddress' value='' />
</nic>
<!-- -->
<!-- Team Data -->
<!-- -->
<!-- <team> element 1 -->
<team relnics='2 3'>
<property id='TeamName' value='HP Network Team #1'/>
<property id='OpMode' value='TransmitLoadBalancing'/>
<property id='LoadBalAlgorithm' value='Auto'/>
<property id='RxHeartbeatInterval' value='3'/>
<property id='TxHeartbeatInterval' value='3'/>
<property id='RxHeartbeatMode' value='Enabled'/>
<property id='TxHeartbeatMode' value='Enabled'/>
<property id='TeamNetworkAddress' value='' />
<property id='FastPathEnabled' value='Enabled'/>
<property id='FastPathSpanningTreeType' value='IEEE 802.1D'/>
<property id='EchoNodeTime' value='3'/>
<property id='EchoNodeTimeout' value='3'/>
<property id='CriteriaRanking' value='9;0;1;2'/>
<property id='RouterPathProtocol' value='HSRPv1'/>
<property id='ActivePathEnabled' value='Enabled'/>
<property id='EchoNodeIPAddress' value='192.168.0.2'/>
<property id='EchoNodeResponseMech' value='CommunityAddressARP'/>
<property id='EchoNodeProbeAddress' value='00-01-FA-FE-FE-FE'/>
<property id='EchoNodeProbeIPAddress' value='192.168.0.3'/>
<property id='EchoNodeUseDefMac' value='Yes'/>
<property id='RouterPathEnabled' value='Enabled'/>
<property id='RouterPathIPAddress' value='192.168.0.4'/>
<property id='CDPv1Enabled' value='Enabled'/>
<property id='CDPv2Enabled' value='Disabled'/>
<property id='LLDPEnabled' value='Disabled'/>
<property id='RSSEnabled' value='Disabled'/>
<property id='DefaultVlanId' value='10'/>
<property id='RxPathValidationVlanId' value='10'/>
<property id='FastPathVlanId' value='10'/>
<property id='ActivePathVlanId' value='10'/>
<property id='RouterPathVlanId' value='10'/>
<!-- <vlan> element 1 -->
<vlan>
<property id='VlanId' value='10'/>
<property id='VlanName' value='VLAN 10'/>
</vlan>
</team>
<teamingconfig>
Error handling and reporting
Errors can occur for a variety of reasons, including differences between the source and target
system NICs or errors introduced by editing the XML data file. The software performs extensive
error checking as the XML data file is read and processed.
When invalid property values are detected, a WARNING error message is written to the log file
and configuration continues with either default or existing values.
18 Network Adapter Scripting Utility