HP XP P9000 for Compatible High Perf FICON Connectivity Software - Manual (Page 99)

Syntax
show
Outputs
The show subcommand displays the storing period and the gathering interval for these two types
of monitoring data: in short range and in long range. For example, the show subcommand outputs
the following information:
Short Range From: 2012/10/01 01:00 - To: 2012/10/01 15:00 Interval:
1min. Long Range From: 2012/09/01 00:00 - To: 2012/10/01 15:00 Interval:
15min.
Short Range indicates the storing period and gathering interval of the monitoring data stored
in short range. Long Range indicates those of the monitoring data stored in long range. When
you run the Export Tool, you can export the monitoring data within these periods into files. If you
use the short-range or long-range subcommand additionally, you can narrow the term of
data to be exported (see
(page 109) or (page 111) ).
From indicates the starting time for collecting monitoring data. To indicates the ending time for
collecting monitoring data.
Interval indicates the interval at which the monitoring data was collected (gathering interval).
For example, Interval 15min. indicates that monitoring data was collected at 15-minute
intervals.
group
Description
The group subcommand specifies the type of monitoring data that you want to export. This
command uses an operand (for example, PhyPG and PhyLDEV above) to specify a type of
monitoring data.
Table 10 (page 100) shows the monitoring data that can be saved into files by each operand, and
the saved ZIP files. For details on the monitoring data saved in these files, see the tables listed in
the See column.
Export Tool command reference 99