HP 8.20q Fibre Channel Switch User Manual
Page 52
52
Managing switches
Configured Local Hostname The requested hostname for the switch. If a fully qualified
domain name is given, the domain suffix is used as the first
suffix in the DNS search list for DNS lookups performed by
the switch.
Assigned Hostname
The actual hostname for the switch. If a fully qualified
domain name is given, the domain suffix is used as the first
suffix in the DNS search list for DNS lookups performed by
the switch.
IPv6 Assigned Address
(1—20)
The set of IPv6 addresses assigned by Dynamic Host
Configuration Protocol (DHCP)v6, Neighborhood Discovery
Protocol (NDP), or the switch administrator.
User Login Group
User Name
Account name
Login Level
Authority level of the user name
Super User
Super user privileges Enabled or Disabled.
UserAuthentication Enabled Enforcement of account names and authority (always True)
Firmware Group
Firmware Version
Active firmware version
Inactive Firmware Version
This field does not apply to this switch
Pending Firmware Version
Firmware version that will be activated at the next reset
PROM/Flasher Version
Installed version of PROM firmware
Services Group
NTP Client Enabled
Allows switches to synchronize their time to a centralized
server. Enabled or Disabled.
NTP Server Address
The IP address of the centralized NTP server. Ethernet
connection to NTP server is required.
FDMI Enable
Fabric Device Management Interface status. If enabled,
device information can be obtained, managed, and saved
through the fabric using Name Service Management Server
functions. If FDMI is Enabled on the entry switch, QuickTools
will report all FDMI information reported by the entry switch.
FDMI HBA Entry Limit
Maximum number of HBAs that can be registered with a
switch.
Embedded GUI Enabled
QuickTools web applet status. Indicates whether the web
applet on the switch is Enabled or Disabled.
Inactivity Timeout
Number of minutes the switch waits before terminating an
idle command line interface (CLI) session. Zero (0) disables
the timeout threshold.
GUI Mgmt Enabled
Web applet status. If Disabled, the switch cannot be
managed using the web applet.
Telnet Enabled
Telnet client status Enabled or Disabled.
Table 9
Switch data window fields
Field
Description