First error check, Second error check, 167 second error check – HP StorageWorks XP Remote Web Console Software User Manual
Page 167: Open pane
Figure 119 Open Pane
.
First Error Check
The first error check is performed when the spreadsheet file is imported. The first error check verifies
that the spreadsheet is properly formatted. If an error occurs, the spreadsheet is rejected, and an error
message is displayed. Errors detected at the first check include the following:
•
The first row of the spreadsheet (the declaration line) is not correctly written, or the stated product
is not installed. For more information on the declaration line, see “
•
The spreadsheet file is not in text file format (the file is a binary file).
•
There is no function tag in the spreadsheet. For more information on the function tag, see “
•
The file name is incorrect (for example, the extension is not .spd, or the file name exceeds the
maximum number of letters).
•
The number of letters in a row exceeds 128.
•
The number of rows in a spreadsheet exceeds 400,000.
Second Error Check
In the second check, the spreadsheet settings are verified. Any errors found are displayed on the Error
Information list. This second check is performed before the Apply button becomes available.
shows the flow of the second check.
The second error check consists of two different types of the checks. These checks are shown in
as the Level 1 and Level 2. The Level 2 check is performed only when no error is found by the
Level 1 check. Each level of the check of the second error check detects the following errors:
•
Level 1 check (the format and parameters are checked):
• A function tag is not supported.
• A setting value is incorrect or omitted.
XP Remote Web Console User Guide
167