HP StorageWorks XP Remote Web Console Software Instruction Manuals and User Guides
We have 108 Instruction Manuals and User Guides for StorageWorks XP Remote Web Console Software HP
Manuals
Read manual
Read manual
Read manual
Read manual
Read manual
Read manual
| Recognized languages: | English |
|---|---|
| Pages: | 154 |
| Size: | 2.46 MB |
Show table of contents
Read manual
Document Outline
- Contents
- About this guide
- 1 Continuous Access XP Journal
- Overview of copy solutions
- Overview of Continuous Access XP Journal
- Functionality
- Components
- Figure 2 Continuous Access XP Journal components
- Figure 3 Connection configuration for multiple secondary disk arrays
- Local disk arrays
- Main and remote control units (primary and secondary disk arrays)
- Journal groups
- Data volume pairs
- Journal volumes
- Consistency groups
- Remote copy connections
- Initiator ports and RCU target ports
- Continuous Access XP Journal Graphical User Interface
- Host failover software
- Remote copy operations
- Figure 5 Remote copy operations
- Initial copy operations
- Update copy operation
- Read and write I/O operations during Continuous Access XP Journal operations
- Secondary data volume write option
- Difference management
- Journal processing
- Inflow control for journal cache
- Journal group operations
- Continuous Access XP Journal data volume pair status
- Continuous Access XP Journal operations requirements and restrictions
- System requirements
- One-to-one volume copy operations
- Logical unit (LU) types
- Journal groups
- Accessing Continuous Access XP Journal primary and secondary data volumes
- Cache and nonvolatile storage (NVS)
- Duplicate volumes
- Port configurations
- Installing hardware
- Enabling Continuous Access XP Journal options
- Planning for journal volumes
- Considerations
- Planning process
- Factors that determine the data transfer speed between the primary and secondary disk arrays
- Configuring primary and secondary disk arrays for Continuous Access XP Journal operations
- Combining Continuous Access XP Journal with other data management functions
- Table 18 Whether non-Continuous Access XP Journal volumes can be used as Continuous Access XP Journal volumes
- Combining Continuous Access XP Journal with Virtual LUN
- Combining Continuous Access XP Journal with Cache LUN XP
- Combining Continuous Access XP Journal with LUN Manager
- Combining Continuous Access XP Journal and Performance Control XP
- Combining Continuous Access XP Journal and Business Copy XP
- Table 19 Host pair status reporting for Continuous Access XP Journal/Business Copy XP shared volumes
- Table 20 Data currency of a shared Continuous Access XP Journal/Business Copy XP volume
- Figure 14 Shared Continuous Access XP Journal secondary data volume and Business Copy XP P-VOL
- Figure 15 Shared Continuous Access XP Journal secondary data volume and Business Copy XP P-VOL
- Figure 16 Shared Continuous Access XP Journal primary data volume and Business Copy XP P-VOL, and Continuous Access XP Journal secondary data volume and Business Copy XP P-VOL
- Figure 17 Business Copy XP S-VOL in PSUS status functioning as Continuous Access XP Journal primary data volume
- Figure 18 Restoring Business Copy XP P-VOLs, step 1
- Figure 19 Restoring Business Copy XP P-VOLs, step 2
- Figure 20 Restoring Business Copy XP P-VOLs, step 3
- Figure 21 Restoring Business Copy XP P-VOLs, step 4
- Figure 22 Restoring Business Copy XP P-VOLs, step 5
- Figure 23 Restoring Business Copy XP P-VOLs, step 6
- Figure 24 Restoring Business Copy XP P-VOLs, step 7
- Figure 25 Restoring Business Copy XP P-VOLs, step 8
- Figure 26 Restoring Business Copy XP P-VOLs, step 9
- Combining Continuous Access XP Journal with Continuous Access XP (3DC cascading configuration)
- Combining Continuous Access XP Journal with Continuous Access XP Synchronous (3DC multi-target configuration)
- Figure 29 3DC multi-target configuration (combining Continuous Access XP Journal with Continuous Access XP Synchronous)
- Hardware configurations
- Setup procedure
- Recovering from primary site failures
- Changing to 3DC multi-target configurations after recovering from primary site failures
- Transferring business tasks from Continuous Access XP secondary sites to primary sites (in 3DC cascading configurations)
- Transferring business tasks from Continuous Access XP secondary sites to primary sites (in 3DC multi-target configurations)
- Recovering from primary site and Continuous Access XP Synchronous secondary site failures
- Transferring business tasks from Continuous Access XP Journal secondary sites to primary sites
- Combining Continuous Access XP Journal and LUN Security XP Extension
- Configuring disk arrays and logical paths
- Displaying the DKC Operation pane
- Configuring port attributes
- Associating primary and remote disk arrays and configuring logical paths (Add DKC)
- Changing options for logical paths and disk arrays
- Adding logical paths
- Deleting logical paths
- Viewing the status of logical paths
- Removing the relationship between primary and secondary disk arrays
- Using journal groups
- Displaying the Journal Operation pane
- Registering journal volumes in journal groups
- Deleting journal volumes from journal groups
- Displaying detailed information about journal groups
- Changing options for journal groups
- Deleting journal groups
- Splitting mirrors (Pairsplit-r: suspending copy operations)
- Restoring mirrors (Pairresync: resuming copy operations)
- Deleting data volumes from mirrors (Pairsplit-S: ending copy operations)
- Performing Continuous Access XP Journal pair operations
- Displaying the Pair Operation pane
- Creating a pair of data volumes (Paircreate)
- Displaying detailed information about a pair of data volumes
- Changing options for data volume pairs
- Splitting a pair of data volumes
- Restoring a pair of data volumes
- Deleting a pair of data volumes
- Creating a Point-in-Time copy of data volumes
- Monitoring remote copy operations
- Viewing history of data volume pair operations
- Performing optional operations
- Disaster recovery operations
- Troubleshooting
- Power management for disk arrays and network relay devices
- Pinned track recovery for Continuous Access XP Journal volumes
- SIM reporting
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 20 |
| Size: | 181 KB |
Show table of contents
Read manual
| Recognized languages: | English |
|---|---|
| Pages: | 252 |
| Size: | 2.37 MB |
Show table of contents
Read manual
Document Outline
- Hitachi Universal Replicator™ for Mainframe User Guide
- Contents
- 1 Overview of Universal Replicator for Mainframe
- 2 About Universal Replicator for Mainframe Operations
- Functionality Overview
- Components
- Remote Copy Operations
- Journal Processing
- Universal Replicator for Mainframe Delta Resync Operation
- Journal Obtain in TrueCopy for Mainframe Synchronous Secondary Site
- Switching the Master Journal Group of Universal Replicator for Mainframe
- Pair Status
- XP for Business Continuity Manager Software Support
- 3 Preparing for Universal Replicator for Mainframe Operations
- Requirements and Restrictions for Universal Replicator for Mainframe
- Installing the Hardware
- Enabling the Universal Replicator for Mainframe Option(s)
- Using Multiple Primary and Secondary Storage Systems
- Interoperability with Other Products and Functions
- Virtual LVI
- Cache Residency Manager
- ShadowImage for Mainframe
- Using the At-Time Split Function When Combining Universal Replicator for Mainframe with ShadowImage for Mainframe
- TrueCopy for Mainframe Synchronous (3DC Cascading Configuration)
- TrueCopy for Mainframe Synchronous (3DC Multi-target Configuration)
- Hardware Configuration
- Setup Procedure
- Requirements for Creating Universal Replicator for Mainframe Pair for the Delta Resync Operation
- Requirements for Performing a Delta Resync Operation
- Configuring Delta Resync Operation Environment to Support Remote Command Devices
- Changing to 3DC Multi-target Configuration after Recovering from Primary Site Failures
- Transferring Business Tasks from the TrueCopy for Mainframe Secondary Site to the Primary Site (in a 3DC Cascading Configuration)
- Transferring Business Tasks from the TrueCopy for Mainframe Secondary Site to the Primary Site (in a 3DC Multi-target Configuration)
- Transferring Business Tasks from TrueCopy for Mainframe Secondary Site to the Primary Site (When the Delta Resync Operation is Performed in 3DC Multi-target Configuration)
- Recovering from Failures in the Primary Site and the TrueCopy for Mainframe Synchronous Secondary Site
- Transferring Business Tasks from the Universal Replicator for Mainframe Secondary Site to the Primary Site
- XP Auto LUN
- Compatible FlashCopy V2
- Planning for Journal Volumes
- Contributing Factors for the Data Transfer Speed between Storage Systems
- Configuration where XP12000/XP10000 and XP24000/XP20000 Disk Arrays are Connected
- 4 Using the Universal Replicator for Mainframe GUI
- 5 Configuring Storage Systems and Logical Paths
- Reviewing Storage System and Logical Paths
- Configuring Port Attributes
- Configuring Storage System Options
- Establishing the Relationship between Primary and Secondary Storage Systems (Add DKC)
- Changing Options for Logical Paths and Storage Systems
- Adding Logical Paths
- Viewing the Status of Logical Paths
- Deleting Logical Paths
- Managing SIMs
- Managing Power for Storage Systems and Network Relay Devices
- Removing the Relationship Between the Primary and the Secondary Storage Systems
- 6 Configuring Journal Groups
- Reviewing Administrator Tasks for Managing Journals
- Registering Journal Volumes in a Journal Group
- Deleting Journal Volumes from a Journal Group
- Displaying Detailed Information about a Journal Group
- Changing Options for a Journal Group
- Deleting a Journal Group
- Splitting a Mirror (Suspending a Copy Operation)
- Restoring a Mirror (Resuming a Copy Operation)
- Deleting Data Volumes from a Mirror (Ending a Copy Operation)
- Assigning Remote Command Devices to Mirrors
- Releasing Assigned Remote Command Device
- 7 Using Extended Consistency Groups
- 8 Performing Pair Operations
- Filtering Information in the List in the Pair Operation Window
- Creating a Pair of Data Volumes
- Displaying Detailed Information about a Pair of Data Volumes
- Saving Pair Status Information into a Text File
- Changing Options for a Data Volume Pair
- Splitting a Pair of Data Volumes
- Restoring a Pair of Data Volumes
- Releasing a Pair of Data Volumes
- Recovering a Pinned Track
- 9 Using Spreadsheets for Universal Replicator for Mainframe Operations
- 10 Usage Monitor Window Operations
- 11 Usage Scenarios
- Creating a Point-in-Time Copy of Data Volumes
- Performing Disaster Recovery Operations
- Preparing for Disaster Recovery Operations
- File and Database Recovery Procedures
- Switching Operations to the Secondary Site
- Transferring Operations Back to the Primary Site
- Resuming Normal Operations at the Primary Site
- Disaster Recovery for Multiple Primary and Secondary Storage Systems
- Disaster Recovery in a 3DC Cascading Configuration
- Recovering from a Disaster at the Main Site in a 3DC Multi-Target Configuration
- Recovering from Failures in the Primary Site (When the Delta Resync Operation is Performed)
- 12 Troubleshooting
- 13 Support and Other Resources
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 186 |
| Size: | 3.09 MB |
Show table of contents
Read manual
Document Outline
- XP Remote Web Console User Guide
- Contents
- 1 Overview of XP Remote Web Console Operations
- 2 Installation Requirements and Procedures
- Prerequisites
- System Requirements
- Setting up the XP Remote Web Console
- Using the XP Remote Web Console
- Starting Up and Logging on to the XP Remote Web Console
- View Mode and Modify Mode
- License Keys
- Enabling and Disabling Options on the XP Remote Web Console
- Allocating Licensed Capacity among Storage Logical Partitions
- 3 Performing XP Remote Web Console Operations
- Supported Storage Platforms and Firmware
- XP Remote Web Console Main Panel
- Identity Tab on the XP Remote Web Console Main Panel
- System Tab on the XP Remote Web Console Main Pane
- XP Remote Web Console Main Panel, Status Tab
- Setting User Accounts (Account Pane)
- Registering New User Accounts
- Changing the Password of User Accounts
- Changing Operation Authority of User Account
- Deleting User Account
- Basic Information Display Pane
- Downloading the Audit Log File
- Checking the Audit Log Using the Syslog Server (Syslog Pane)
- Control Panel
- Setting the XP Remote Web Console Environment Parameters (Set Env. Panel)
- Downloading the Configuration Files (Download Panel)
- Restoring Backups of Configuration Files (Restore Panel)
- Extending Cache Memory and LUs Using the On-Demand Storage Functions
- Downloading Trace Files Using the FD Dump Tool
- 4 Setting SNMP Agent Properties
- 5 SSL Encrypted Communication
- 6 Configuration File Loader
- 7 Troubleshooting
- 8 Support and Other Resources
- Acronyms and Abbreviations
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 56 |
| Size: | 911 KB |
Show table of contents
Read manual
Document Outline
- Contents
- Auto LUN XP for the XP128/XP1024
- Auto LUN XP features
- Auto LUN XP tasks
- Reserve volumes
- Volume migration
- Estimating usage rates
- Automatic migration
- Manual migration
- Requirements and restrictions
- Starting Auto LUN XP
- Creating and executing migration plans
- Troubleshooting Auto LUN XP
- Auto LUN/Performance Control Base Monitor for the XP128/XP1024
- Auto LUN statistics
- Usage statistics
- Collecting usage statistics about disk array resources
- Viewing parity group usage statistics
- Viewing logical volume usage statistics
- Viewing channel adapter (CHA) usage statistics
- Viewing channel processor (CHP) usage statistics
- Viewing disk adapter (DKA) usage statistics
- Viewing disk processor (DKP) usage statistics
- Viewing data recovery and reconstruction processor (DRR) usage statistics
- Viewing write pending rates
- Viewing access path usage statistics
- Workload and traffic statistics
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 203 |
| Size: | 4.80 MB |
Show table of contents
Read manual
Document Outline
- Hitachi Universal Replicator™ for z/OS User Guide
- Contents
- 1 Overview of Universal Replicator for z/OS
- 2 Overview of Universal Replicator for Mainframe Operations
- Overview of URz Functionality
- URz Components
- Remote Copy Operations
- Journal Processing
- Journal Group Operations
- URz Delta Resync Operation
- URz Data Volume Pair Status
- Business Continuity Manager Support
- 3 Requirements and Restrictions for Universal Replicator z/OS Operations
- System Requirements
- Requirements and Restrictions for URz
- Installing the Hardware
- Enabling the URz Option(s)
- Planning of Journal Volumes
- Configuring the Primary and Secondary Storage Systems
- Using More Than One Primary and Secondary Storage System for Remote Console
- Basic Behavior
- Hardware Configuration (When More Than One Primary and Secondary Storage System are Used)
- Setup Procedure (When More Than One Primary and Secondary Subsystem are Used)
- Extended Consistency Groups
- Connections Among Secondary Storage Systems
- Disaster Recovery for Multiple Primary and Secondary Storage Systems
- Combining URz with Other Data Management Operations
- Combining URz with XP Cache LUN Software
- Combining URz with Cache Residency Manager
- Combining URz and ShadowImage for z/OS
- Using At-Time Split Function When Combining URz with ShadowImage for z/OS
- Combining URz with TCz Synchronous (3DC Cascading Configuration)
- Combining URz with TCz Synchronous (3DC Multi-target Configuration)
- Hardware Configuration
- Setup Procedure
- Requirements for Creating URz Pair for Delta Resync Operation
- Requirements for Performing Delta Resync Operation
- Recovering from Failures in the Primary Site
- Recovering from Failures in the Primary Site
- Changing to 3DC Multi-target Configuration after Recovering from Primary Site Failures
- Transferring Business Tasks from TCz Secondary Site to the Primary Site
- Transferring Business Tasks from TCz Secondary Site to the Primary Site (in 3DC Multi-target Configuration)
- Transferring Business Tasks from TCz Secondary Site to the Primary Site
- Recovering from Failures in the Primary Site and the TCz Synchronous Secondary Site
- Transferring Business Tasks from the URz Secondary Site to the Primary Site
- 4 Configuring Disk Storage Systems and Logical Paths
- DKC Operation Window
- Configuring Port Attributes
- Associating the Primary and the Remote Storage Systems and Configuring Logical Paths (Add DKC)
- Changing Options for Logical Paths and Storage Systems
- Adding Logical Paths
- Deleting Logical Paths
- Viewing the Status of Logical Paths
- Removing the Relationship Between the Primary and the Secondary Storage Systems
- 5 Using Journal Groups
- Displaying the Journal Operation Window
- Registering Journal Volumes in a Journal Group
- Deleting Journal Volumes from a Journal Group
- Displaying Detailed Information about a Journal Group
- Changing Options for a Journal Group
- Deleting a Journal Group
- Splitting a Mirror (Suspending a Copy Operation)
- Restoring a Mirror (Resuming a Copy Operation)
- Deleting Data Volumes from a Mirror (Ending a Copy Operation)
- Forcibly Removing Journal Groups from an Extended Consistency Group
- 6 Performing URz Pair Operations
- Displaying the Pair Operation Window
- Creating a Pair of Data Volumes
- Displaying Detailed Information about a Pair of Data Volumes
- Changing Options for a Data Volume Pair
- Splitting a Pair of Data Volumes
- Restoring a Pair of Data Volumes
- Deleting a Pair of Data Volumes
- Creating a Point-in-Time Copy of Data Volumes
- 7 Monitoring Remote Copy Operations
- 8 Viewing History of Data Volume Pair Operations
- 9 Performing Optional Operations
- 10 Using Extended Consistency Groups
- 11 Disaster Recovery Operations
- 12 Troubleshooting
- 13 Support and Other Resources
- A Managing Power for Storage Systems and Network Relay Devices
- B Recovering a Pinned Track
- C Checking Service Information Messages (SIMs)
- D Acronyms and Abbreviations
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 220 |
| Size: | 5.97 MB |
Show table of contents
Read manual
Document Outline
- About this guide
- 1 Overview of LUN Manager
- 2 Preparing to use LUN Manager
- 3 LUN Manager panes
- 4 LUN Manager operations
- 5 Troubleshooting LUN Manager
- 6 Finding an open-system host's World Wide Name (WWN)
- 7 Overview of Volume Manager and Custom Colume Size
- 8 Preparing to use Volume Manager or Custom Volume Size
- 9 Volume Manager operations
- 10 Custom Colume Size Operations
- 11 Troubleshooting Volume Manager and Custom Volume Size
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 62 |
| Size: | 1.03 MB |
Show table of contents
Read manual
Document Outline
- About this guide
- Contents
- 1 Snapshot XP
- Overview
- Snapshot XP functions
- Snapshot XP operations
- Using Snapshot XP
- Snapshot XP operations
- Displaying the Business Copy XP main pane
- Creating or deleting pools
- Creating or deleting virtual volumes
- Creating Snapshot XP pairs
- Storing snapshot data
- Restoring Snapshot XP pairs
- Deleting snapshot data
- Deleting Snapshot XP pairs
- Displaying detailed information about Snapshot XP pairs
- Displaying operation history
- Troubleshooting
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 106 |
| Size: | 1.95 MB |
Show table of contents
Read manual
Document Outline
- Contents
- About this guide
- 1 External Storage XP for the XP10000/XP12000
- Mapping
- Alternate paths
- Figure 2 Example of alternate path settings
- Figure 3 Example of alternate path configuration using two switches
- Figure 4 Example of incorrect alternate path configurations
- Examples of switching I/O execution paths to alternate paths
- External Storage XP uses
- Combining External Storage XP with other HP StorageWorks products
- Requirements and restrictions
- System requirements
- Storage devices that can be connected as external disk arrays
- Fibre Channel switches supported
- External Storage XP requirements
- Limitations concerning External Storage XP operations
- Preparing for External Storage XP operations
- External Storage XP operations
- Configuring external LUs
- Overview of steps required to define external LUs
- Configuring external disk array LUs, host mode, and ports
- Setting port attributes on the local disk arrays
- Mapping external LUs
- Setting alternate paths on each external LU
- Checking External Storage XP volume status (LDEV Information)
- Disconnecting external disk arrays or external LUs
- Checking connection status and resuming external LU operations (Check Paths & Restore Vol.)
- Deleting external LU mappings (Delete LU)
- ”Alternate paths” on page 12Remote command devices
- Troubleshooting External Storage XP
- System parameter for external disk arrays
- Required volume capacity for emulation types
- Description for Characteristic2
- Adjusting volume capacity for copy pair setting
- Additional information about TagmaStore AMS, TagmaStore WMS, and Thunder 9500V Series subsystems
- A Using XP12000 disk arrays with EVA GL disk arrays attached as subordinated external storage disk arrays
- Preface
- Configuration
- Configuring MSA1000/1500 as external disk arrays
- Recommendations
- Troubleshooting
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 43 |
| Size: | 1.25 MB |
Show table of contents
Read manual
Document Outline
- HP StorageWorks XP24000 Disk/Cache Partition User's Guide
| Recognized languages: | English |
|---|---|
| Pages: | 26 |
| Size: | 313 KB |
Show table of contents
Read manual
| Recognized languages: | English |
|---|---|
| Pages: | 34 |
| Size: | 995 KB |
Show table of contents
Read manual
Document Outline
- Contents
- About this guide
- Overview of LUN Security XP Extension
- Preparing for LUN Security XP Extension operations
- LUN Security XP Extension panes
- LUN Security XP Extension operations
- Changing logical volumes’ access attributes
- Modifying retention terms
- Prohibiting changes to Read/Write volumes after the retention term ends
- Protecting logical volumes against Continuous Access XP and Business Copy XP operations
- Protecting Read/Write logical volumes from Continuous Access XP and Business Copy XP operations
- Preventing Command View XP or XP Remote Web Console users from config. LU paths & cmd. devs.
- Setting VMA
- Deleting extents
- Viewing a list of logical volumes combined into a LUSE volume
- Troubleshooting
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 198 |
| Size: | 3.47 MB |
Show table of contents
Read manual
Document Outline
- HP StorageWorks LUN Configuration and Security Mnager XP user guide for the XP12000/XP10000/SVS200
- Contents
- About this guide
- Part 1: LUN Configuration and Security Manager XP - LUN Manager
- 1 Overview of LUN Manager
- Figure 1 Array integrating Fibre Channel, iSCSI, and NAS environments
- Configuring LU paths
- Configuring LUN security
- Configuring LUs for use by RAID Manager XP
- Fibre Channel ports
- Fibre Channel topologies
- Fibre Channel port addresses
- Data transfer speed for Fibre Channel ports
- Standard, High Speed, and Initiator/External MIX modes
- Figure 8 Ports in High Speed or Initiator/External MIX mode
- Table 3 Port serial numbers and names (4-port channel adapters)
- Table 4 Port serial numbers and names (8-port channel adapter)
- Table 5 Port serial numbers and names (16-port channel adapter)
- Table 6 Port serial numbers and names (XP10000/SVS200)
- iSCSI port and iSNS server settings
- Status of connections between hosts and the array
- User authentication (Fibre Channel environments)
- User authentication (iSCSI environments)
- NAS channel adapters
- 2 Preparing to use LUN Manager
- 3 LUN Manager panes
- LUN Manager pane
- Port pane
- Authentication pane
- Figure 30 Authentication pane (Fibre folder selected)
- Figure 31 Authentication pane (port icon under Fibre folder selected)
- Figure 32 Authentication pane (icon under iSCSI folder selected)
- Port tree
- Port Information list
- FC Switch Information list
- Authentication information (Target) list
- Authentication Information (Host) list
- Buttons
- 4 LUN Manager operations
- Starting LUN Manager
- Defining LU paths
- Creating host groups
- Registering hosts in host groups
- Associating host groups or iSCSI targets to logical volumes
- Changing or viewing LU path settings
- Deleting LU paths
- Changing a host group’s name and host mode
- Changing an iSCSI target’s name and host mode
- Deleting host groups
- Deleting iSCSI targets
- Initializing host group 0 (zero)
- Initializing iSCSI target 0 (zero)
- Changing a host bus adapter’s WWN and nickname
- Changing a host bus adapter’s iSCSI name and nickname
- Deleting host bus adapters from host groups
- Deleting host bus adapters from iSCSI targets
- Deleting unneeded WWNs from the WWN name table
- Deleting (initializing) unneeded iSCSI names
- Viewing a list of concatenated parity groups
- Defining and viewing alternate paths
- Using LUN security
- Configuring arrays for using RAID Manager XP commands
- Configuring Fibre Channel ports
- Making settings on iSCSI ports and iSNS servers
- Checking the status of the connection between hosts and the array (iSCSI environments only)
- Setting user authentication (Fibre Channel environments)
- Enabling and disabling authentication of hosts in host groups
- Registering a host’s user information on a host group
- Changing a host’s user information (Fibre Channel environments)
- Deleting a host’s user information (Fibre Channel environments)
- Specifying a host group’s user information (when performing mutual authentication)
- Clearing a host group’s user information (when performing mutual authentication)
- Settings and connection results in authentication of hosts (Fibre Channel environments)
- Settings and connection results in authentication of Fibre Channel switches
- Specifying a Fibre Channel port’s information
- Registering a Fibre Channel port’s user information
- Registering a Fibre Channel switch’s user information
- Clearing a Fibre Channel switch’s user information
- Specifying a Fibre Channel switch’s authentication mode
- Specifying whether a Fibre Channel switch can perform authentication
- Setting user authentication (iSCSI environments)
- Enabling and disabling authentication of hosts on iSCSI targets
- Registering a host’s user information on an iSCSI target
- Changing a host’s user information
- Deleting a host’s user information (iSCSI environments)
- Specifying an iSCSI target’s user information (when performing mutual authentication)
- Clearing an iSCSI target’s user information (when performing mutual authentication)
- Settings and connection results in authentication of hosts (iSCSI environments)
- Operating NAS channel adapters
- 5 Troubleshooting LUN Manager
- 6 Finding an open-system host’s World Wide Name (WWN)
- 1 Overview of LUN Manager
- Part 2: LUN Configuration and Security Manager XP - Volume Manager
- 7 Overview of Volume Manager and Custom Volume Size
- Overview of Volume Manager
- Overview of Custom Volume Size
- CVS function
- Parity group configuration
- Volume to Space function
- Install CV function
- Volume Initialize and Make Volume functions
- SSID requirements
- Requirements for CU groups
- 8 Preparing to use Volume Manager or Custom Volume Size
- 9 Volume Manager operations
- Volume Manager panes
- Volume Manager operations
- 10 Custom Volume Size operations
- Custom Volume Size panes
- Customized Volume pane
- Volume to Space Confirmation pane
- Install CV pane (1)
- Install CV pane (2)
- Install CV pane (3)
- Install CV pane (4)
- Make Volume pane
- Make Volume pane (2)
- Make Volume pane (3)
- Make Volume pane (4)
- Volume Initialize pane (1)
- Volume Initialize pane (2)
- Volume Initialize pane (3)
- Concatenation List pane
- Format All pane
- Write to Control Blocks pane
- Performing Custom Volume Size operations
- Before starting CVS operations
- CVS operations
- Viewing current CVS configuration information
- Viewing concatenated parity groups
- Converting logical volumes to space
- Creating CVS volumes (Install CV operation)
- Deleting CVS volumes
- Converting CVs back to FVs (Volume Initialize operation)
- Re-creating CVs after initializing the VDEV (Make Volume operation)
- Formatting LDEVs
- Making external mainframe volumes usable
- Custom Volume Size panes
- 11 Troubleshooting Volume Manager and Custom Volume Size
- 7 Overview of Volume Manager and Custom Volume Size
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 105 |
| Size: | 4.50 MB |
Show table of contents
Read manual
Document Outline
- HP StorageWorks XP24000 LUN Manager User's Guide
- About this Guide
- 1 Overview of HP StorageWorks XP LUN Manager Operations
- 2 About LUN Manager Operations
- 3 Preparing for LUN Manager Operations
- 4 Using the LUN Manager GUI
- 5 Performing LUN Manager Operations
- Launching LUN Manager for Fibre Channel Operations
- Defining Fibre Channel LU Paths
- Setting Fibre Channel Authentication
- Changing the Fibre Channel LU Path Settings
- Configuring Fibre Channel Ports
- Viewing a List of Concatenated Parity Groups
- Deleting LU Paths
- Defining and Viewing Alternate Paths
- Using LUN Security
- Configuring the Storage System for Using RAID Manager
- 6 Performing LUN Manager Operations Using Configuration File Loader
- 7 Troubleshooting
- A Glossary, Acronyms, and Abbreviations
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 56 |
| Size: | 626 KB |
| Recognized languages: | English |
|---|---|
| Pages: | 174 |
| Size: | 2.59 MB |
Show table of contents
Read manual
Document Outline
- XP24000/XP20000 Remote Web Console User's Guide
- Table of Contents
- 1 About Remote Web Console Operations
- 2 Installation Requirements and Procedures
- 3 Using the Remote Web Console GUI
- Common Elements of the Remote Web Console Main Windows
- License Key Window
- Identity Window
- Port Status Window
- Alerts Window
- Account Window
- Login Message Window
- Syslog Window
- Audit Log Transfer Window
- Audit Log Setting Window
- Encryption Window
- Email Information Window
- Configuration File Loader Window
- Reports Display Dialog Boxes
- Tool Panel
- Control Panel
- 4 Performing Remote Web Console Operations
- Enabling and Disabling Remote Web Console Options
- Launching the Desired Option
- Managing the User Accounts
- Reporting SIMs by Email
- Setting the Environment Parameters
- Downloading the Configuration Files
- Restoring Backups of the Configuration Files
- Downloading Trace Files Using the FD Dump Tool
- Using Configuration File Loader
- Registering and Deleting the Certificates of HP Systems Insight Manager
- 5 Using the CFL Extension
- 6 Troubleshooting
- 7 Support and Other Resources
- A Audit Logs for Single Sign-On
- B Error Codes for Single Sign-On
- C Glossary, Acronyms, and Abbreviations
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 234 |
| Size: | 3.85 MB |
Show table of contents
Read manual
Document Outline
- About this guide
- 1 Overview of HP copy solutions
- 2 Overview of Continuous Access XP Journal
- 3 Continuous Access XP Journal operations requirements and restrictions
- 4 Configuring arrays and logical paths
- 5 Using journal groups
- 6 Performing Continuous Access XP Journal pair operations
- 7 Monitoring remote copy operations
- 8 Viewing history of data volume pair operations
- 9 Performing optional operations
- 10 Disaster recovery operations
- 11 Continuous Access XP Journal operations with NAS Blade
- 12 Troubleshooting
- 13 Power management for arrays and network relay devices
- 14 Pinned track recovery for Continuous Access XP Journal volumes
- 15 SIM reporting
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 36 |
| Size: | 800 KB |
Show table of contents
Read manual
| Recognized languages: | English |
|---|---|
| Pages: | 100 |
| Size: | 1.31 MB |
| Recognized languages: | English |
|---|---|
| Pages: | 176 |
| Size: | 4.17 MB |
Show table of contents
Read manual
Document Outline
- XP24000/XP20000 Continuous Access Software User Guide
- Contents
- 1 Overview of XP Continuous Access Software
- 2 About XP Continuous Access Operations
- XP Continuous Access Components
- XP Continuous Access Remote Copy Operations
- XP Continuous Access Asynchronous Recordset Operations
- XP Continuous Access Synchronous Consistency Group Operations
- XP Continuous Access Asynchronous Consistency Group Operations
- Pair Status
- Interoperability with Other Products and Functions
- 3 Preparing for XP Continuous Access Operations
- 4 Using the XP Continuous Access GUI
- 5 Performing XP Continuous Access Configuration Operations
- 6 Performing XP Continuous Access Pair Operations
- Preparing for XP Continuous Access Pair Operations
- Creating XP Continuous Access Pairs
- Changing Pair Options
- Viewing XP Continuous Access Pair Status
- Splitting XP Continuous Access Pairs
- Resynchronizing XP Continuous Access Pairs
- Releasing XP Continuous Access Pairs
- Powering Off/On XP Continuous Access Components
- Pinned Track Recovery for XP Continuous Access Volumes
- 7 Usage Scenarios
- Data Migration Using XP Continuous Access Synchronous
- Point-in-Time (PiT) Data Duplication Using XP Continuous Access Asynchronous
- Using XP Continuous Access for Disaster Recovery Operations
- Considering the P-VOL Fence Level Setting
- Setting the Fence Level
- Transferring Sense Information Between Sites
- File and Database Recovery Procedures
- Switching Operations to the Remote Site
- Analyzing the Currency of XP Continuous Access Synchronous S-VOLs
- Analyzing the Consistency of XP Continuous Access Asynchronous S-VOLs
- Transferring Operations Back to the Primary Site
- Resuming Normal Operations at the Primary Site
- 8 Troubleshooting
- 9 Support and Other Resources
- A XP Continuous Access Load Balancing and Sidefile Management and Control
- B Retention of Pair Consistency using the Consistency Group of the XP Continuous Access Synchronous
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 20 |
| Size: | 252 KB |
Show table of contents
Read manual
Document Outline
- XP Data Shredder user guide
- 1 HP StorageWorks XP Data Shredder for the XP12000/XP10000 Disk Array
- 2 Support and other resources
| Recognized languages: | English |
|---|---|
| Pages: | 52 |
| Size: | 1.04 MB |
Show table of contents
Read manual
Document Outline
- XP24000/XP20000 Cache Residency Manager User Guide
- Contents
- 1 Overview of HP StorageWorks XP Cache Residency Manager
- 2 About Cache Residency Manager Operations
- 3 Preparing for Cache Residency Manager Operations
- Preparing Storage System and Remote Web Console Computers
- System Requirements
- Enabling the Cache Residency Option
- Launching Cache Residency
- Required Cache Size for Cache Residency
- Cache Residency Cache Extents
- Cache Residency Manager Restrictions
- HP StorageWorks XP Disk/Cache Partition Support Requirements
- 4 Using the Cache Residency Manager GUI
- 5 Performing Cache Residency Manager Operations
- 6 Troubleshooting
- 7 Support and Other Resources
- A Device Types Other Than OPEN-V
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 180 |
| Size: | 1.37 MB |
Show table of contents
Read manual
Document Outline
- XP24000/XP20000 Continuous Access Software User Guide
- Contents
- 1 Overview of XP Continuous Access Software
- 2 About XP Continuous Access Operations
- XP Continuous Access Components
- XP Continuous Access Remote Copy Operations
- XP Continuous Access Asynchronous Recordset Operations
- XP Continuous Access Synchronous Consistency Group Operations
- XP Continuous Access Asynchronous Consistency Group Operations
- Pair Status
- Interoperability with Other Products and Functions
- 3 Preparing for XP Continuous Access Operations
- 4 Using the XP Continuous Access GUI
- 5 Performing XP Continuous Access Configuration Operations
- 6 Performing XP Continuous Access Pair Operations
- Preparing for XP Continuous Access Pair Operations
- Creating XP Continuous Access Pairs
- Changing Pair Options
- Viewing XP Continuous Access Pair Status
- Splitting XP Continuous Access Pairs
- Resynchronizing XP Continuous Access Pairs
- Releasing XP Continuous Access Pairs
- Powering Off/On XP Continuous Access Components
- Pinned Track Recovery for XP Continuous Access Volumes
- 7 Usage Scenarios
- Data Migration Using XP Continuous Access Synchronous
- Point-in-Time (PiT) Data Duplication Using XP Continuous Access Asynchronous
- Using XP Continuous Access for Disaster Recovery Operations
- Considering the P-VOL Fence Level Setting
- Setting the Fence Level
- Transferring Sense Information Between Sites
- File and Database Recovery Procedures
- Switching Operations to the Remote Site
- Analyzing the Currency of XP Continuous Access Synchronous S-VOLs
- Analyzing the Consistency of XP Continuous Access Asynchronous S-VOLs
- Transferring Operations Back to the Primary Site
- Resuming Normal Operations at the Primary Site
- 8 Troubleshooting
- 9 Support and Other Resources
- A XP Continuous Access Load Balancing and Sidefile Management and Control
- B Retention of Pair Consistency using the Consistency Group of the XP Continuous Access Synchronous
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 42 |
| Size: | 1.14 MB |
Show table of contents
Read manual
Document Outline
- XP24000/XP20000 Disk/Cache Partition User's Guide
- Table of Contents
- 1 Overview of HP StorageWorks XP Disk/Cache Partition Software
- 2 About Disk/Cache Partition
- 3 Preparing for XP Disk/Cache Partition Operations
- 4 Using the XP Disk/Cache Partition GUI
- 5 XP Disk/Cache Partition Operations
- 6 Troubleshooting
- 7 Support and Other Resources
- A Acronyms and Abbreviations
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 116 |
| Size: | 1.75 MB |
Show table of contents
Read manual
Document Outline
- XP24000/XP20000 Snapshot User Guide
- Contents
- 1 Overview of HP XP Snapshot Software
- 2 About XP Snapshot Operations
- 3 Preparing for XP Snapshot Operations
- 4 Using the XP Snapshot GUI
- 5 Performing XP Snapshot Operations
- XP Snapshot Processes
- Configuring the Volume List
- Deleting the Settings in Preview List
- Creating or Deleting Pools
- Creating or Deleting Virtual Volumes
- Creating XP Snapshot Pairs
- Storing XP Snapshot Data
- Storing XP Snapshot Data by Consistency Group with At-Time Snapshot Function
- Restoring XP Snapshot Pairs
- Deleting XP Snapshot Data
- Deleting XP Snapshot Pairs
- Viewing Detailed Volume and Pair Information
- Viewing S-VOL Path Information
- Viewing the Number of Pairs and License Information
- Displaying the Operation History
- 6 Troubleshooting
- 7 Support and other resources
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 112 |
| Size: | 1.22 MB |
Show table of contents
Read manual
Document Outline
- XP24000/XP20000 LUN Manager User Guide
- Contents
- 1 Overview of LUN Manager Operations
- 2 About LUN Manager Operations
- 3 Preparing for LUN Manager Operations
- 4 Using the LUN Manager GUI
- 5 Performing LUN Manager Operations
- Launching LUN Manager for Fibre Channel Operations
- Defining Fibre Channel LU Paths
- Setting Fibre Channel Authentication
- Changing the Fibre Channel LU Path Settings
- Configuring Fibre Channel Ports
- Viewing a List of Concatenated Parity Groups
- Deleting LU Paths
- Defining and Viewing Alternate Paths
- Using LUN Security
- Configuring the Storage System for Using RAID Manager
- Setting UUID
- Clearing the setting of UUID
- 6 Performing LUN Manager Operations Using Configuration File Loader
- 7 Troubleshooting
- 8 Support and Other Resources
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 101 |
| Size: | 1.47 MB |
Show table of contents
Read manual
Document Outline
- XP24000/XP20000 Virtual LVI/LUN (VLL) and Volume Shredder User Guide
- Contents
- 1 Overview of Virtual LVI/LUN and Volume Shredder
- 2 About Virtual LVI/LUN and Volume Shredder
- Overview of Virtual LVI/LUN
- Overview of LDEV Formatting
- Overview of Quick Formatting
- Overview of Configuring External Mainframe Volumes
- Overview of Volume Shredder
- 3 Preparing for Virtual LVI/LUN and Volume Shredder Operations
- 4 Using the Virtual LVI/LUN and Volume Shredder GUI
- Customized Volume Window
- Install CV Dialog Box (1)
- Install CV Dialog Box (2)
- Set SSID (Install CV) Dialog Box
- Install CV Dialog Box (4)
- Install CV Confirmation Dialog Box
- Make Volume Dialog Box (1)
- Make Volume Dialog Box (2)
- Set SSID (Make Volume) Dialog Box
- Make Volume Dialog Box (4)
- Make Volume Confirmation Dialog Box
- Volume Initialize Dialog Box (1)
- Volume Initialize (Set SSID) Dialog Box
- Volume Initialize Confirmation Dialog Box
- RAID Concatenation Dialog Box
- Format All Dialog Box
- Shredding Param. Dialog Box
- Shredding Complete Confirmation Dialog Box
- Shredding Data Output Dialog Box
- Select Progress Dialog Box
- System Disk Options Dialog Box
- 5 Performing Virtual LVI/LUN and Volume Shredder Operations
- Virtual LVI/LUN Operations
- Launching Virtual LVI/LUN
- Viewing Concatenated Parity Groups
- Converting Logical Volumes to Space
- Creating VLL Volumes (Install CV Function)
- Deleting VLL Volumes
- Converting CVs Back to FVs (Volume Initialize Operation)
- Re-creating the CVs After Initializing the VDEV (Make Volume Operation)
- Formatting the LDEVs
- Quick Formatting the LDEVs
- Making External Mainframe Volumes Usable
- Volume Shredder Operations (For Volumes Using Hard Disk)
- Virtual LVI/LUN Operations
- 6 Troubleshooting
- 7 Support and Other Resources
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 245 |
| Size: | 9.05 MB |
Show table of contents
Read manual
Document Outline
- XP24000/XP20000 Continuous Access Journal Software User Guide
- Contents
- 1 Overview of HP XP Continuous Access Journal Software
- 2 About XP Continuous Access Journal Operations
- Functionality Overview
- XP Continuous Access Journal Components
- Storage Systems
- XP Continuous Access Journal Software
- Logical Disk Controllers
- Main and Remote Control Units (Primary Storage Systems and Secondary Storage Systems)
- Consistency Groups
- Remote Copy Connections
- Initiator Ports and RCU Target Ports
- Journal Groups
- Data Volume Pairs
- Journal Volumes
- Host Failover Software
- XP Continuous Access Journal Remote Copy Operations
- Journal Processing
- XP Continuous Access Journal Delta Resync Operation
- Journal Obtain at XP Continuous Access Synchronous Secondary Site
- Switching the Master Journal Group of XP Continuous Access Journal
- Pair Status
- 3 Preparing for XP Continuous Access Journal Operations
- Requirements and Restrictions
- Installing the Hardware
- Configuring the Primary and Secondary Storage Systems for XP Continuous Access Journal Operations
- Using Multiple Primary and Secondary Storage Systems
- 3DC Multi-target Configuration of Three XP Continuous Access Journal Sites
- 3DC Cascading Configuration of Three XP Continuous Access Journal Sites
- Enabling the XP Continuous Access Journal Option
- Interoperability with Other Products and Functions
- LUSE
- Virtual LUN
- Cache Residency Manager
- LUN Manager
- XP Thin Provisioning
- XP Performance Control
- XP Business Copy
- XP Continuous Access Synchronous (3DC Cascading Configuration)
- XP Continuous Access Synchronous (3DC Multi-Target Configuration)
- Hardware Configuration
- Setup Procedure
- Requirements for Creating an XP Continuous Access Journal Pair for the Delta Resync Operation
- Requirements for Performing the Delta Resync Operation
- Configuring Delta Resync Operation Environment that uses Remote Command Devices
- Changing to a 3DC Multi-Target Configuration After Recovering from Primary Site Failures
- Transferring Business Tasks from an XP Continuous Access Secondary Site to the Primary Site (in a 3DC Cascading Configuration)
- Transferring Business Tasks from the XP Continuous Access Secondary Site to the Primary Site (in a 3DC Multi-target Configuration)
- Transferring Business Tasks from XP Continuous Access Secondary Site to Primary Site (When Delta Resync Operation is Performed in 3DC Multi-target Configuration)
- Recovering from Failures at the Primary Site and the XP Continuous Access Synchronous Secondary Site
- Transferring Business Tasks from the XP Continuous Access Journal Secondary Site to the Primary Site
- XP Continuous Access Synchronous (2DC Configuration)
- Basic Behavior
- Hardware Configuration
- Setup Procedure
- Restrictions About 2DC
- Changing to 2DC Configuration after Recovering from Primary Site Failures
- Data Retention Utility
- Performance Monitor
- XP Auto LUN Software
- Planning of Journal Volumes
- Factors That Determine Data Transfer Speed Between the Primary and Secondary Storage System
- Performing Remote Copy Between an XP12000/XP10000 Disk Array and an XP24000/XP20000 Disk Array
- 4 Using the XP Continuous Access Journal GUI
- 5 Configuring Storage Systems and Logical Paths
- Reviewing System Configuration Tasks
- Configuring Port Attributes
- Configuring Storage System Options
- Establishing the Relationship Between Primary and Secondary Storage Systems (Add DKC)
- Changing Options for Logical Paths and Storage Systems
- Adding Logical Paths
- Viewing the Status of Logical Paths
- Deleting Logical Paths
- Managing Power for Storage Systems and Network Relay Devices
- Removing the Relationship Between Primary and Secondary Storage Systems
- 6 Using Journal Groups
- Reviewing Administrator Tasks for Managing Journals
- Registering Journal Volumes in a Journal Group
- Deleting Journal Volumes from a Journal Group
- Displaying Detailed Information about a Journal Group
- Changing Options for a Journal Group
- Deleting a Journal Group
- Splitting a Mirror (Pairsplit-r: Suspending a Copy Operation)
- Restoring a Mirror (Pairresync: Resuming a Copy Operation)
- Deleting Data Volumes from a Mirror (Pairsplit-S: Ending a Copy Operation)
- Assigning Remote Command Devices to Mirrors
- Releasing Assigned Remote Command Device
- 7 Performing XP Continuous Access Journal Pair Operations
- Reviewing the Pair Operation Window
- Creating a Pair of Data Volumes (Paircreate)
- Displaying Detailed Information about a Pair of Data Volumes
- Changing Options for a Data Volume Pair
- Splitting a Pair of Data Volumes (Pairsplit-r)
- Restoring a Pair of Data Volumes (Pairresync)
- Releasing a Pair of Data Volumes (Pairsplit-S)
- Creating a Point-in-Time Copy of Data Volumes
- Recovering a Pinned Track
- 8 Usage Monitor Operations
- 9 Performing Disaster Recovery Operations
- Preparing for Disaster Recovery
- Recovering from Primary Site Failures in XP Continuous Access Journal 3DC Multi-Target Configuration (When Delta Resync Operation is Performed)
- Recovering from Primary Site Failures in XP Continuous Access Journal 3DC Cascading configuration
- Recovering from a Failure in the Intermediate Site in a 3DC Cascading Configuration
- Recovering from a Failure by Duplicating Volumes in a 3DC Cascading Configuration
- Recovering from a Disaster in a 3DC Cascading Configurationof XP Continuous Access Journal and XP Continuous Access Synchronous
- Recovering from Primary Site Disaster in a 3DC Multi-Target Configuration
- Recovering from Primary Site Failures in 3DC Multi Target Configuration of XP Continuous Access Journal and XP Continuous Access Synchronous (When Delta Resync Operation Is Performed)
- Recovering from a Disaster in a 2DC Configuration of XP Continuous Access Journal and XP Continuous Access Synchronous
- Recovering the Primary Site from a Failure When the System Consists of Multiple Primary and Secondary Storage Systems
- 10 Troubleshooting
- 11 Support and Other Resources
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 314 |
| Size: | 2.18 MB |
| Recognized languages: | English |
|---|---|
| Pages: | 208 |
| Size: | 3.07 MB |
Show table of contents
Read manual
Document Outline
- Contents
- 1 TrueCopy for the XP128/XP1024/XP10000/XP12000
- Other Data Duplication Features
- Overview of TrueCopy Operations
- Components
- Figure 1 TrueCopy components for serial (ESCON) connection
- Figure 2 TrueCopy components for Fibre Channel connection
- XP128/XP1024/XP10000/XP12000
- Control Units (MCUs and RCUs)
- CU Emulation Types
- Volume Pairs (M-VOLs and R-VOLs)
- Remote Copy Connections
- Initiator Ports and RCU Target Ports
- Remote Control Ports (RCPs) and Local Control Ports (LCPs)
- Command View XP Management Station or XP Remote Web Console
- Asynchronous Consistency Groups
- Host I/O Time-Stamping Function
- Error Reporting Communications
- Remote Copy Operations
- TrueCopy Asynchronous Recordset Operations
- TrueCopy Asynchronous Consistency Group Operations
- TrueCopy Volume Pair Status
- PPRC Support
- Components
- Preparing for TrueCopy Operations
- System Requirements
- Requirements and Restrictions
- Installing the TrueCopy Hardware
- Installing the TrueCopy Software
- Configuring the MCUs and RCUs for TrueCopy Operations
- Combining TrueCopy with Other Data Management Operations
- Table 13 Requirements and restrictions for combining TrueCopy and HXRC
- Combining TrueCopy and ShadowImage
- Table 14 Host pair status reporting for TrueCopy/ShadowImage shared volumes
- Table 15 Data currency of a shared TrueCopy/ShadowImage volume
- Figure 21 TrueCopy and ShadowImage: shared M-VOL/S-VOL
- Figure 22 TrueCopy and ShadowImage: shared R-VOL/S-VOL
- Figure 23 TrueCopy and ShadowImage: shared M-VOL/S-VOL and R-VOL/S-VOL
- Figure 24 TrueCopy and ShadowImage: shared M-VOL/T-VOL
- Starting TrueCopy
- Performing TrueCopy Configuration Operations
- TrueCopy Main Window
- TrueCopy Main Window (Pair Operations Window)
- RCU Operations Window
- Asynchronous Operations Window
- Usage Monitor Window
- Script Operations Window
- History Window
- Other Operations Window
- RCU Operations
- To perform the RCU operations from the RCU Operations tab:
- Configuring the Host Interface Ports
- Viewing RCU Status (RCU Status)
- Registering an RCU (Add RCU)
- RCU Path Parameters
- Modifying RCU Options (Change RCU Option)
- Deleting an RCU (Delete RCU)
- Adding and Deleting Logical Paths for an RCU (Add Path and Delete Path)
- Adding and Deleting SSIDs for an RCU (Add SSID and Delete SSID)
- Modifying Parameters and Omitting Selected Settings
- Asynchronous Operations
- To perform the asynchronous operations:
- Viewing Consistency Group Status (CT Group Status)
- Adding Consistency Groups (Add CT Group)
- Modifying Consistency Group Options (CT Group Option)
- Deleting Consistency Groups (Delete CT Group)
- Asynchronous Copy Option
- Modifying Parameters and Omitting Consistency Groups
- Usage Monitor Operations
- Script Operations
- History Operations
- Other Operations
- Optimizing TrueCopy Operations and Disk Array Performance
- Discontinuing TrueCopy Operations
- Performing TrueCopy Pair Operations
- Preparing for TrueCopy Volume Pair Operations
- Common Procedure for TrueCopy Pair Operation
- Viewing the Status of TrueCopy Volume Pairs (Pair Status)
- Creating TrueCopy Volume Pairs (Add Pair)
- Suspending TrueCopy Pairs (Suspend Pair)
- Resuming TrueCopy Volume Pairs (Resume Pair)
- Deleting TrueCopy Volume Pairs (Delete Pair)
- Changing the Pair Options (Change Pair Option)
- ICKDSF Considerations for TrueCopy Volumes
- Using TrueCopy for Data Migration and Duplication
- Powering Off/On TrueCopy Components
- TrueCopy Disaster Recovery Operations
- Troubleshooting
- Using PPRC Commands for TrueCopy
- Overview of PPRC Commands
- Using PPRC TSO Commands with TrueCopy Asynchronous
- CGROUP (FREEZE/RUN) Support
- IEA494I and IEA491E Console Messages
- XP128/XP1024/XP10000/XP12000 Response Characteristics to Failure Conditions
- Pinned Track Recovery for TrueCopy Volumes
- SIM Reporting
- TrueCopy Scripting
- HXRC Device Blocking and Load Balancing
- Device Blocking Function
- Load Balancing Control
- Current Load Balancing Control
- New Load Balancing Control
- Figure 76 Combination 1: MODE 85,86 = ON,OFF; Threshold 1/2/3 = 30/40/50%
- Figure 77 Combination 2 (Default): MODE 85,86 = OFF,OFF; Threshold 1/2/3 = 40/50/60%
- Figure 78 Combination 3: MODE 85,86 = OFF,ON - Threshold 1/2/3 = 50/60/70%
- Figure 79 Combination 4: MODE 85,86 = ON,ON - Threshold 1/2/3 = 60/70/80%
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 75 |
| Size: | 1.52 MB |
Show table of contents
Read manual
Document Outline
- XP24000/XP20000 for Compatible Parallel Access Volumes Software User Guide
- Contents
- 1 Overview of HP StorageWorks XP for Compatible Parallel Access Volumes Software
- 2 About Compatible PAV Operations
- 3 Preparing for Compatible PAV Operations
- 4 Performing Compatible PAV Operations
- 5 Monitoring Compatible PAV Activities
- 6 Troubleshooting
- 7 Support and Other Resources
- A Using HCD to Define and View Storage System Logical Control Units and Compatible PAV Devices
- B Checking the WLM PAV Settings
- C Using Compatible Hyper PAV
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 230 |
| Size: | 2.25 MB |
Show table of contents
Read manual
Document Outline
- Contents
- Hitachi TrueCopy z/OS for HP XP12000/XP10000 and SVS 200 storage systems
- Hitachi TrueCopy features
- Other data duplication Features
- Overview of TrueCopy operations
- Components
- Figure 1 TrueCopy components for serial (ESCON) connection
- Figure 2 TrueCopy components for Fibre Channel connection
- XP12000/XP10000 storage systems
- Control units (MCUs and RCUs)
- CU emulation types
- Volume pairs (M-VOLs and R-VOLs)
- Remote copy connections
- Initiator ports and RCU target ports
- Remote control ports (RCPs) and local control ports (LCPs)
- XP Command View Advanced Edition Software server or XP Remote Web Console
- Asynchronous consistency groups
- Host I/O time-stamping function
- Error reporting communications
- Remote copy operations
- TrueCopy Asynchronous recordset operations
- TrueCopy Asynchronous consistency group operations
- TrueCopy volume pair status
- PPRC support
- Components
- Preparing for TrueCopy operations
- System requirements
- Requirements and restrictions
- Installing the TrueCopy hardware
- Installing the TrueCopy software
- Configuring the MCUs and RCUs for TrueCopy operations
- Combining TrueCopy with other data management operations
- Table 15 Using Non-TC390 and Non-TC390A Volumes as TC390 and TC390A Volumes
- Table 16 Requirements and restrictions for combining TrueCopy and HXRC
- Combining TrueCopy and ShadowImage
- Table 17 Host pair status reporting for TrueCopy/ShadowImage shared volumes
- Table 18 Data currency of a shared TrueCopy/ShadowImage volume
- Figure 20 TrueCopy and ShadowImage: shared M-VOL/S-VOL
- Figure 21 TrueCopy and ShadowImage: shared R-VOL/S-VOL
- Figure 22 TrueCopy and ShadowImage: shared M-VOL/S-VOL and R-VOL/S-VOL
- Figure 23 TrueCopy and ShadowImage: shared M-VOL/T-VOL
- Combining TrueCopy for z/OS and Virtual LVI/LUN
- Combining TrueCopy for z/OS and Cache Residency Manager
- Combining TrueCopy for z/OS and XP Performance Control
- Combining TrueCopy for z/OS and XP External Storage Software
- Starting TrueCopy
- Performing TrueCopy configuration operations
- TrueCopy main window
- TrueCopy main window (Pair Operations window)
- RCU Operations window
- Asynchronous Operations window
- Usage Monitor window
- Script Operations window
- History window
- Other Operations window
- RCU operations
- To perform the RCU operations from the RCU Operations tab:
- Configuring the host interface ports
- Viewing RCU Status (RCU Status)
- Registering an RCU (Add RCU)
- RCU path parameters
- Modifying RCU options (Change RCU option)
- Deleting an RCU (Delete RCU)
- Adding and deleting logical paths for an RCU (Add Path and Delete Path)
- Adding and deleting SSIDs for an RCU (Add SSID and Delete SSID)
- Modifying parameters and omitting selected settings
- Asynchronous operations
- To perform asynchronous operations:
- Viewing consistency group status (CT Group Status)
- Adding consistency groups (Add CT Group)
- Modifying consistency group options (CT Group Option)
- Deleting consistency groups (Delete CT Group)
- Asynchronous copy option
- Modifying parameters and omitting consistency groups
- Usage Monitor operations
- Script operations
- History operations
- Other operations
- Optimizing TrueCopy operations and disk array performance
- Discontinuing TrueCopy operations
- Performing TrueCopy pair operations
- Preparing for TrueCopy volume pair operations
- Common procedure for TrueCopy pair operation
- Viewing the status of TrueCopy volume pairs (Pair Status)
- Creating TrueCopy volume pairs (Add Pair)
- Suspending TrueCopy pairs (Suspend Pair)
- Resuming TrueCopy volume pairs (Resume Pair)
- Deleting TrueCopy volume pairs (Delete Pair)
- Changing the pair options (Change Pair Option)
- ICKDSF considerations for TrueCopy volumes
- Using TrueCopy for data migration and duplication
- Powering off/on TrueCopy components
- TrueCopy disaster recovery operations
- Troubleshooting
- Using PPRC commands for TrueCopy
- Overview of PPRC commands
- Using PPRC TSO commands with TrueCopy Asynchronous
- CGROUP (FREEZE/RUN) support
- IEA494I and IEA491E console messages
- XP12000/XP10000 response characteristics to failure conditions
- Pinned track recovery for TrueCopy volumes
- SIM reporting
- TrueCopy scripting
- HXRC device blocking and load balancing
- Device blocking function
- Load balancing control
- Current load balancing control
- New load balancing control
- Figure 84 Combination 1: MODE 85,86 = ON,OFF; Threshold 1/2/3 = 30/40/50%
- Figure 85 Combination 2 (Default): MODE 85,86 = OFF,OFF; Threshold 1/2/3 = 40/50/60%
- Figure 86 Combination 3: MODE 85,86 = OFF,ON – Threshold 1/2/3 = 50/60/70%
- Figure 87 Combination 4: MODE 85,86 = ON,ON – Threshold 1/2/3 = 60/70/80%
- Support and Other Resources
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 68 |
| Size: | 1016 KB |
Show table of contents
Read manual
Document Outline
- Contents
- Auto LUN XP for the XP12000/XP10000
- Auto LUN XP features
- Auto LUN XP tasks
- Reserve volumes
- Volume migration
- Estimating usage rates
- Automatic migration
- Manual migration
- Requirements and restrictions
- Selection of CU group
- Logical volumes
- Source volumes
- LUSE source volumes
- Target volumes
- Number of volumes
- Calculating the number of Auto LUN XP concurrent migration plans
- Auto migration planning
- Auto migration execution
- Manual migration execution
- Copy Threshold option
- Progress value
- Effects on other XP products
- Maintenance
- Auto migration parameters
- Powering off disk arrays
- Starting Auto LUN XP
- Creating and executing migration plans
- Troubleshooting Auto LUN XP
- Using RAID Manager for manual Auto LUN XP migrations
- Auto LUN/Performance Control Base Monitor
- Auto LUN XP statistics
- Usage statistics
- Collecting usage statistics about disk array resources
- Viewing parity group usage statistics
- Viewing logical volume usage statistics
- Viewing channel adapter (CHA) usage statistics
- Viewing channel processor (CHP) usage statistics
- Viewing disk adapter (DKA) usage statistics
- Viewing disk processor (DKP) usage statistics
- Viewing data recovery and reconstruction processor (DRR) usage statistics
- Viewing write pending rates
- Viewing access path usage statistics
- Workload and traffic statistics
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 110 |
| Size: | 3.13 MB |
Show table of contents
Read manual
Document Outline
| Recognized languages: | English |
|---|---|
| Pages: | 114 |
| Size: | 3.25 MB |
Show table of contents
Read manual
Document Outline
- Hitachi ShadowImage™ for Mainframe User's Guide
- Contents
- 1 Overview of Hitachi ShadowImage™ for Mainframe
- 2 About ShadowImage for Mainframe Operations
- 3 Interoperability with other Products and Functions
- Virtual LVI
- Cache Residency Manager
- Volume Security
- Volume Retention Manager
- XP Auto LUN
- HP XP External Storage Software
- Hitachi TrueCopy™ for Mainframe
- XP Continuous Access Journal Software™ for Mainframe
- TrueCopy for Mainframe and Universal Replicator for Mainframe
- HP XP for Compatible Extended Remote Copy (XRC) Software
- Concurrent Copy
- 4 Preparing for ShadowImage for Mainframe Operations
- 5 Using the ShadowImage for Mainframe GUI
- 6 Performing ShadowImage for Mainframe Operations Using Remote Web Console
- Configuring the Volume List
- Changing or Deleting the Settings in Preview List
- Setting or Resetting the Reserve Attribute
- Setting Options
- Configuring CTGs
- Adding Pairs
- Splitting Pairs
- Using PPRC Commands to Split, Resynchronize, and Delete Pairs in a CTG
- Suspending Pairs
- Resynchronizing Pairs
- Deleting Pairs
- Viewing Detailed Volume and Pair Information
- Viewing the Number of Pairs and License Information
- Viewing Pair Operations History
- 7 Performing ShadowImage for Mainframe Pair Operations Using XP for Business Continuity Manager Software
- 8 Performing ShadowImage for Mainframe Pair Operations Using PPRC
- 9 Troubleshooting
- 10 Support and Other Resources
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 92 |
| Size: | 1.06 MB |
Show table of contents
Read manual
Document Outline
- XP24000/XP20000 Thin Provisioning Software User Guide
- Contents
- 1 Overview of HP StorageWorks XP Thin Provisioning Software
- 2 About XP Thin Provisioning Operations
- 3 Preparing for XP Thin Provisioning Operations
- 4 Using the XP Thin Provisioning GUI
- Pool Window
- V-VOL Window
- XP Thin Provisioning Window
- New Pool Dialog Box
- Change Pool Information Dialog Box
- New V-VOL Group Dialog Box
- Create V-VOL Dialog Box (1)
- Create V-VOL Dialog Box (2)
- Create V-VOL Dialog Box (3)
- Create V-VOL Confirmation Dialog Box
- Connect Pool Dialog Box
- Change Threshold Dialog Box
- Associate V-VOL Groups with Pool Dialog Box
- Release V-VOL Groups from Pool Dialog Box
- Delete V-VOL Groups Dialog Box
- 5 Performing XP Thin Provisioning Operations
- 6 Troubleshooting
- 7 Support and Other Resources
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 44 |
| Size: | 530 KB |
Show table of contents
Read manual
Document Outline
- XP24000/XP20000 Volume Retention Manager User's Guide
- Table of Contents
- 1 Overview of HP StorageWorks XP Volume Retention Manager
- 2 About Volume Retention Manager Operations
- 3 Preparing for Volume Retention Manager Operations
- 4 Using the Volume Retention Manager GUI
- 5 Performing Volume Retention Manager Operations
- 6 Volume Retention Manager Spreadsheets
- 7 Usage Scenarios
- 8 Troubleshooting
- 9 Support and Other Resources
- A Acronyms and Abbreviations
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 88 |
| Size: | 1.55 MB |
Show table of contents
Read manual
Document Outline
- HP StorageWorks LUN Configuration and Security Manager XP user guide for the XP1024/Xp128
- Contents
- About this guide
- 1 LUN Manager for the XP1024/XP128
- LU configuration overview
- Supported emulation types
- LU paths
- Configuring LU paths in a Fibre Channel environment
- 16-Port FC/CA CHIP product
- Host groups
- Host modes
- LUN Security
- RAID Manager command devices
- Fibre Channel port attributes
- iSCSI environments
- LUN Manager operations
- Starting LUN Manager
- LUN Manager main pane
- Defining LU paths
- Creating host groups
- Registering hosts in host groups
- Figure 13 Add New WWN dialog box (Fibre Channel)
- Figure 14 Add New iSCSI Name dialog box (iSCSI)
- Figure 15 Add New WWN dialog box (when registering a host that has previously been connected to the disk array)
- Figure 16 Add New iSCSI Name dialog box (when registering a host that has previously been connected to the disk array)
- Associating host groups to logical volumes
- Changing or viewing LU path settings
- Defining alternate paths
- Viewing alternate paths
- Deleting WWNs
- Applying and removing LUN security
- Creating RAID Manager Command Devices
- Port Operations
- Making settings on iSCSI ports and iSNS servers
- Checking the status of connection between hosts and the disk array (iSCSI environment only)
- Setting user authentication (iSCSI environments only)
- Starting User Authentication Operations
- User Authentication tab
- Specifying whether to enable or disable host authentication on a port
- Registering user information of hosts on a port
- Changing user information of hosts
- Deleting user information of hosts
- Specifying user information of ports (when performing mutual authentication)
- Clearing user information of ports (when performing mutual authentication)
- Relationship between port settings and connection results
- Operational restrictions
- 2 Volume Management for the XP1024/XP128
- Volume Management (LU Size Expansion)
- Custom Volume Size (CVS)
- LUSE operations
- Starting LUSE operations
- Volume Management pane
- Viewing LUSE configuration information
- Viewing concatenated parity groups
- Creating a LUSE volume using the Volume Count list
- Creating a LUSE volume using the Select an LDEV list
- Creating a LUSE volume using the LDEV information table
- Releasing a LUSE volume
- Changing LUSE capacities
- Resetting an unregistered LUSE volume
- CVS operations
- Starting CVS operations
- Customized volume pane
- Viewing CVS configuration information
- Viewing concatenated parity groups
- Converting volumes to space (Volume to Space)
- Creating custom volumes (Install CV)
- Figure 33 Install CV pane (1) for OPEN-V (when two or more free spaces are available)
- Figure 34 Install CV pane (1) for other than OPEN-V
- Figure 35 Install CV pane (1) for OPEN-V after clicking Set
- Figure 36 Install CV pane (1) for other than OPEN-V after clicking Set
- Figure 37 Install CV pane (2)
- Figure 38 Select an LDEV number
- Figure 39 Setting the SSID
- Figure 40 Customized volume screen
- Deleting custom volumes (Volume to Space)
- Creating initial custom volumes for OPEN-V (Make Volume)
- Initializing custom volumes for other than OPEN-V (Volume Initialize)
- Formatting LDEVs
- Formatting all blocked volumes
- Operational restrictions
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 87 |
| Size: | 1.46 MB |
Show table of contents
Read manual
Document Outline
- XP24000/XP20000 Thin Provisioning Software User Guide
- Contents
- 1 Overview of HP XP Thin Provisioning Software
- 2 About XP Thin Provisioning Operations
- 3 Preparing for XP Thin Provisioning Operations
- 4 Using the XP Thin Provisioning GUI
- Pool Window
- V-VOL Window
- XP Thin Provisioning Window
- New Pool Dialog Box
- Change Pool Information Dialog Box
- New V-VOL Group Dialog Box
- Create V-VOL Dialog Box (1)
- Create V-VOL Dialog Box (2)
- Create V-VOL Dialog Box (3)
- Create V-VOL Confirmation Dialog Box
- Connect Pool Dialog Box
- Change Threshold Dialog Box
- Associate V-VOL Groups with Pool Dialog Box
- Release V-VOL Groups from Pool Dialog Box
- Delete V-VOL Groups Dialog Box
- 5 Performing XP Thin Provisioning Operations
- 6 Troubleshooting
- 7 Support and Other Resources
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 66 |
| Size: | 2.11 MB |
Show table of contents
Read manual
Document Outline
- HP StorageWorks XP24000 Thin Provisioning Software User's Guide
| Recognized languages: | English |
|---|---|
| Pages: | 17 |
| Size: | 252 KB |
| Recognized languages: | English |
|---|---|
| Pages: | 28 |
| Size: | 422 KB |
Show table of contents
Read manual
Document Outline
- Contents
- LUN Security XP Extension for the XP128/XP1024/XP10000/XP12000
- Assigning access attributes to logical volumes
- Restricting read and write operations
- Using LUN Security XP Extension with other products
- Starting LUN Security XP Extension
- Using LUN Security XP Extension
- Changing logical volumes’ access attributes
- Modifying retention terms
- Prohibiting changes to Read/Write volumes after the retention term ends
- Protecting logical volumes against Continuous Access XP and BC XP operations
- Preventing Command View XP or XP Remote Web Console users from configuring LU paths and command devices
- Setting VMA
- Viewing a list of logical volumes combined into a LUSE volume
- Troubleshooting LUN Security XP Extension
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 98 |
| Size: | 1.04 MB |
Show table of contents
Read manual
Document Outline
- XP Business Copy User Guide
- 1 Business Copy XP (BC) for the Array
- Overview of BC operations
- BC components
- BC requirements for the array
- BC operations
- Set reserve attribute operation
- Reset reserve attribute operation
- Paircreate operation
- Initial copy operation
- Update copy operation
- Cascade function
- Pairsplit operation
- Pairresync operations
- Forward pairresync operation
- Backward pairresync operation
- Pair status and time required for pairresync
- Pairsplit-E operation (suspend)
- Pairsplit-S operation (delete)
- BC options
- Cascade function
- At-Time Split function
- Pair status
- Cautions on switching off the power supply
- Cautions on using the XP10000
- Preparing for BC operations
- System requirements
- Preparing for BC operations
- Combining BC with other data management operations
- Combining BC and Continuous Access XP operations
- Combining BC and Continuous Access XP Journal operations
- Combining BC with LUN Security XP Extension
- Copying access attributes
- License capacity of LUN Security XP Extension
- Starting BC
- Performing BC operations
- Setting reserve attributes
- Resetting reserve attributes
- Creating BC pairs (Paircreate)
- Splitting BC pairs (Pairsplit)
- Resynchronizing BC pairs (Pairresync)
- Suspending BC pairs (Pairsplit-E)
- Deleting BC pairs (Pairsplit-S)
- Viewing BC pair status and history
- Setting BC options
- BC error codes
- Troubleshooting When Using XP RAID Manager
- Overview of BC operations
- 2 Support and Other Resources
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 164 |
| Size: | 3.35 MB |
Show table of contents
Read manual
Document Outline
- HP StorageWorks External Storage XP user guide
- Contents
- About this guide
- 1 Overview of connecting external arrays
- 2 Preparing for External Storage XP operations
- System requirements
- External Storage XP requirements
- Installing External Storage XP
- Preparing for External Storage XP settings
- Powering arrays on or off
- Using mapped external LUs from the host connected to the local array
- Uninstalling External Storage XP
- Limitations on External Storage XP operations
- Figure 11 Example of external LU with 2 TB or less
- Figure 12 External LU capacity is larger than the specified emulation type’s basic capacity (OPEN-3 example)
- Figure 13 External LU capacity is smaller than the specified emulation type’s basic capacity
- Table 4 When external LU’s emulation type is OPEN
- Table 5 When external LU’s emulation type is for mainframes
- Combining External Storage XP with other HP StorageWorks products
- 3 Managing cache with external storage
- Guidelines for using cache with external storage
- Determining, setting, or changing the external LU cache mode
- Partitioning cache for external storage
- Determining the number and size of needed partitions
- Creating Cache partitions
- Changing storage system modes
- 4 External Storage XP panes
- 5 Configuring external LUs
- Overview of configuring external LUs
- Setting an external array’s port
- Setting a local array’s port attributes
- Mapping external LUs (Add LU)
- Setting alternate paths for external LUs
- Adding alternate paths by selecting multiple external LUs (Add Paths)
- Deleting alternate paths by selecting multiple external LUs (Delete Paths)
- Checking an external LU’s status (LDEV Information)
- Disconnecting external arrays or LUs
- Checking the connection status and resuming external LU operations (Check Paths & Restore Vol.)
- Restoring external LUs (LDEV Restore)
- Stopping the use of paths to an external LU by specifying an external array’s WWN (Disconnect Paths)
- Restoring paths to an external LU by specifying an external array’s WWN (Check Paths)
- Changing an external array’s port setting
- Stopping the use of paths to an external LU by specifying a local array’s port (Disconnect Paths)
- Restoring paths to an external LU by specifying a local array’s port (Check Paths)
- Deleting external LU mappings (Delete LU)
- 6 Troubleshooting NAS Blade systems that include external arrays
- 7 Remote command devices
- 8 Troubleshooting External Storage XP
- A Notes on connecting external arrays
- Connecting Thunder 9500V subsystems
- System parameters for connecting Thunder 9500V subsystems
- Relationship between serial numbers in the Device list on the LU Operation pane and Thunder 9500V subsystem models
- Relationship between the WWN of the port on the Thunder 9500V subsystem and the controller
- Path status and examples of recovery procedures (Thunder 9500V subsystems)
- Connecting TagmaStore AMS and TagmaStore WMS subsystems
- System parameters for connecting TagmaStore AMS and TagmaStore WMS subsystems
- Relationship between serial numbers in the Device list on the LU Operation pane and TagmaStore AMS and TagmaStore WMS subsystem models
- Relationship between the WWN of the port on the TagmaStore AMS or TagmaStore WMS subsystem and the controller
- Path status and examples of recovery procedures (TagmaStore AMS and TagmaStore WMS subsystems)
- Connecting XP12000/XP10000 Disk Arrays
- Connecting XP1024/XP128 Disk Arrays
- Connecting XP512/XP48 Disk Arrays
- Connecting HP 200 Storage Virtualization System as external storage
- Connecting EVA arrays
- Connecting Thunder 9500V subsystems
- B Required volume capacity for emulation types
- C Adjusting volume capacity for copy pair setting
- D Using an XP12000/XP10000/SVS200 with an EVA3000/5000 external storage
- E Configuring MSA1000/1500 as external arrays
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 149 |
| Size: | 3.76 MB |
Show table of contents
Read manual
Document Outline
- XP24000/XP20000 Remote Web Console User Guide
- Contents
- 1 About Remote Web Console Operations
- Overview of Remote Web Console
- Remote Web Console Features
- User Access Levels
- Overview of Audit Logs
- Overview of Configuration File Loader Operations
- Overview of SSL-Encrypted Communications
- Encryption Function Enhancement (Solution to the Year 2010 Encryption Problem)
- Single Sign-on from HP Systems Insight Manager
- Important Terms and Concepts
- 2 Installation Requirements and Procedures
- 3 Using the Remote Web Console GUI
- Common Elements of the Remote Web Console Main Windows
- License Key Window
- Identity Window
- Port Status Window
- Alerts Window
- Account Window
- Login Message Window
- Syslog Window
- Audit Log Transfer Window
- Audit Log Setting Window
- Encryption Window
- E-mail Information Window
- Configuration File Loader Window
- Reports Display Dialog Boxes
- Tool Panel
- Control Panel
- 4 Performing Remote Web Console Operations
- Enabling and Disabling Remote Web Console Options
- Launching the Desired Option
- Managing the User Accounts
- Reporting SIMs by Email
- Setting the Environment Parameters
- Downloading the Configuration Files
- Restoring Backups of the Configuration Files
- Downloading Trace Files Using the FD Dump Tool
- Using Configuration File Loader
- Registering and Deleting the Certificates of HP Systems Insight Manager
- 5 Using the CFL Extension
- 6 Troubleshooting
- 7 Support and Other Resources
- A Audit Logs for Single Sign-On
- B Error Codes for Single Sign-On
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 263 |
| Size: | 2.00 MB |
Show table of contents
Read manual
Document Outline
- Hitachi TrueCopy™ for Mainframe User Guide
- Contents
- 1 Overview of TrueCopy for Mainframe
- 2 About TrueCopy for Mainframe Operations
- TrueCopy for Mainframe Components
- Remote Copy Operations
- TrueCopy for Mainframe Async Recordset Operations
- TrueCopy Open/MF Consistency Group Operations
- TrueCopy for Mainframe Async Consistency Group Operations
- Pair Status
- Business Continuity Manager Support
- PPRC Support
- Interoperability with Other Products and Functions
- XP Auto LUN
- Restriction for Connecting with Former Models of Storage System
- 3 Preparing for TrueCopy for Mainframe Operations
- 4 Using TrueCopy for Mainframe GUI
- 5 Performing TrueCopy for Mainframe Configuration Operations
- 6 Performing TrueCopy for Mainframe Pair Operations
- Creating TrueCopy for Mainframe Pairs
- Changing Pair Options
- Viewing TrueCopy for Mainframe Pair Status
- Splitting TrueCopy for Mainframe Pairs
- Resynchronizing TrueCopy for Mainframe Pairs
- Releasing TrueCopy for Mainframe Pairs
- ICKDSF Considerations for TrueCopy for Mainframe Volumes
- Pinned Track Recovery for TrueCopy for Mainframe Volumes
- 7 TrueCopy for Mainframe Usage Scenarios
- Using TrueCopy for Mainframe for Disaster Recovery
- Using TrueCopy for Mainframe for Data Migration
- Using TrueCopy for Mainframe for Duplication
- 8 Troubleshooting
- 9 Support and Other Resources
- A Using PPRC Commands for TrueCopy for Mainframe
- B TrueCopy for Mainframe Scripting
- C TrueCopy for Mainframe Load Balancing and Sidefile Management and Control
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 192 |
| Size: | 2.41 MB |
Show table of contents
Read manual
Document Outline
- XP External Storage Software User Guide
- Contents
- 1 Overview of connecting external arrays
- 2 Preparing for XP External Storage operations
- Supported storage platforms and firmware
- Prerequisites
- System requirements
- XP External Storage requirements
- Installing XP External Storage
- Preparing for XP External Storage settings
- Powering arrays on or off
- Using mapped external LUs from the host connected to the local array
- Uninstalling XP External Storage
- Limitations on XP External Storage operations
- Combining XP External Storage with other HP StorageWorks products
- 3 Managing cache with external storage
- 4 XP External Storage panes
- 5 Configuring external LUs
- Overview of configuring external LUs
- Setting an external array's port
- Setting a local array's port attributes
- Discovering and Mapping LUs
- Setting alternate paths for external LUs
- Adding alternate paths by selecting multiple external LUs (Add Paths)
- Deleting alternate paths by selecting multiple external LUs (Delete Paths)
- Checking an external LU's status (LDEV Information)
- Disconnecting external arrays or LUs
- Checking the connection status and resuming external LU operations (Check Paths & Restore Vol.)
- Restoring external LUs (LDEV Restore)
- Changing the cache mode setting of the external LU
- Changing the cache mode of all external LUs in an external array
- Changing the cache mode of an individual external LU
- Stopping the use of paths to an external LU by specifying an external array's WWN (Disconnect Paths)
- Restoring paths to an external LU by specifying an external array's WWN (Check Paths)
- Changing an external array's port setting
- Stopping the use of paths to an external LU by specifying a local array's port (Disconnect Paths)
- Restoring paths to an external LU by specifying a local array's port (Check Paths)
- Deleting external LU mappings (Delete LU)
- 6 Troubleshooting NAS Blade systems that include external arrays
- 7 Remote command devices
- 8 Troubleshooting XP External Storage
- 9 Support and other resources
- A Notes on connecting external arrays
- Connecting Thunder 9500V subsystems
- System parameters for connecting Thunder 9500V subsystems
- Relationship between serial number and array model of Hitachi Thunder 9500V subsystem
- Relationship between the WWN of the port on the Thunder 9500V subsystem and the controller
- Path status and examples of recovery procedures (Thunder 9500V subsystems)
- Connecting TagmaStore AMS and TagmaStore WMS subsystems
- System parameters for connecting TagmaStore AMS and TagmaStore WMS subsystems
- Relationship between serial numbers in device list on the LU operation panel and TagmaStore AMS and TagmaStore WMS subsystem models
- Relation between the WWN of the port on the TagmaStore AMS or TagmaStore WMS subsystem and controller
- Path status and examples of recovery procedure (TagmaStore AMS and TagmaStore WMS subsystems)
- Notes When Power Saving Feature is Used (For TagmaStore AMS Subsystem, TagmaStore WMS Subsystem)
- Connecting XP24000/XP20000 Disk Arrays
- Connecting XP12000/XP10000 Disk Arrays
- Connecting XP1024/XP128 Disk Arrays
- Connecting XP512/XP48 Disk Arrays
- Connecting HP 200 Storage Virtualization System as external storage
- Connecting EVA arrays
- System parameter settings for connecting EVA arrays
- Identifying logical volumes of EVA arrays (using Characteristic 2)
- Alternate path's behavior when an EVA array is connected
- System parameter settings for connecting Sun StorEdge 6120/6320
- System parameter settings for connecting Sun StorageTek FlexLine 380
- System parameter settings for connecting Sun StorageTek 2540
- Alternate paths for connecting Sun StorageTek V2X2
- Connecting EMC CLARiiON CX Series
- Notes on Connecting EMC CLARiiON CX Series
- System Parameter for Connecting EMC Symmetrix Series
- System parameter settings for connecting IBM DS4000 Series
- Alternate Path Mode for Connecting IBM DS8000 Series
- Non-HP arrays
- Connecting Thunder 9500V subsystems
- B Required volume capacity for emulation types
- C Adjusting volume capacity for copy pair setting
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 258 |
| Size: | 5.85 MB |
Show table of contents
Read manual
Document Outline
- Hitachi TrueCopy™ for Mainframe User Guide
- Contents
- 1 Overview of TrueCopy for Mainframe
- 2 About TrueCopy for Mainframe Operations
- TrueCopy for Mainframe Components
- Remote Copy Operations
- TrueCopy for Mainframe Async Recordset Operations
- TrueCopy Open/MF Consistency Group Operations
- TrueCopy for Mainframe Async Consistency Group Operations
- Pair Status
- Business Continuity Manager Support
- PPRC Support
- Interoperability with Other Products and Functions
- XP Auto LUN
- Restriction for Connecting with Former Models of Storage System
- 3 Preparing for TrueCopy for Mainframe Operations
- 4 Using TrueCopy for Mainframe GUI
- 5 Performing TrueCopy for Mainframe Configuration Operations
- 6 Performing TrueCopy for Mainframe Pair Operations
- Creating TrueCopy for Mainframe Pairs
- Changing Pair Options
- Viewing TrueCopy for Mainframe Pair Status
- Splitting TrueCopy for Mainframe Pairs
- Resynchronizing TrueCopy for Mainframe Pairs
- Releasing TrueCopy for Mainframe Pairs
- ICKDSF Considerations for TrueCopy for Mainframe Volumes
- Pinned Track Recovery for TrueCopy for Mainframe Volumes
- 7 TrueCopy for Mainframe Usage Scenarios
- Using TrueCopy for Mainframe for Disaster Recovery
- Using TrueCopy for Mainframe for Data Migration
- Using TrueCopy for Mainframe for Duplication
- 8 Troubleshooting
- 9 Support and Other Resources
- A Using PPRC Commands for TrueCopy for Mainframe
- B TrueCopy for Mainframe Scripting
- C TrueCopy for Mainframe Load Balancing and Sidefile Management and Control
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 98 |
| Size: | 1.62 MB |
Show table of contents
Read manual
Document Outline
- Contents
- LUN Manager for the XP128/XP1024
- LU configuration overview
- Supported emulation types
- LU paths
- Configuring LU paths in a Fibre Channel environment
- Configuring LU paths in a NAS environment
- 16-Port FC/CA CHIP product
- Host groups
- Host modes
- LUN Security
- RAID Manager command devices
- Fibre Channel port attributes
- iSCSI environments
- LUN Manager operations
- Starting LUN Manager
- LUN Manager main pane
- Defining LU paths
- Creating host groups
- Registering hosts in host groups
- Figure 15 Add New WWN dialog box (Fibre Channel)
- Figure 16 Add New iSCSI Name dialog box (iSCSI)
- Figure 17 Add New WWN dialog box (when registering a host that has previously been connected to the disk array)
- Figure 18 Add New iSCSI Name dialog box (when registering a host that has previously been connected to the disk array)
- Associating host groups to logical volumes
- Changing or viewing LU path settings
- Defining alternate paths
- Viewing alternate paths
- Deleting WWNs
- Applying and removing LUN security
- Creating RAID Manager Command Devices
- Port Operations
- Making settings on iSCSI ports and iSNS servers
- Checking the status of connection between hosts and the disk array (iSCSI environment only)
- Setting user authentication (iSCSI environments only)
- Starting User Authentication Operations
- User Authentication tab
- Specifying whether to enable or disable host authentication on a port
- Registering user information of hosts on a port
- Changing user information of hosts
- Deleting user information of hosts
- Specifying user information of ports (when performing mutual authentication)
- Clearing user information of ports (when performing mutual authentication)
- Relationship between port settings and connection results
- Operational restrictions
- Volume Management for the XP128/XP1024
- Volume Management (LU Size Expansion)
- Volume Size Configuration (VSC)
- LUSE operations
- Starting LUSE operations
- Volume Management pane
- Viewing LUSE configuration information
- Viewing concatenated parity groups
- Creating a LUSE volume using the Volume Count list
- Creating a LUSE volume using the Select an LDEV list
- Creating a LUSE volume using the LDEV information table
- Releasing a LUSE volume
- Changing LUSE capacities
- Resetting an unregistered LUSE volume
- VSC Operations
- Starting VSC operations
- Customized volume pane
- Viewing VSC configuration information
- Viewing concatenated parity groups
- Converting volumes to space (Volume to Space)
- Creating custom volumes (Install CV)
- Figure 35 Install CV pane (1) for OPEN-V (when two or more free spaces are available)
- Figure 36 Install CV pane (1) for other than OPEN-V
- Figure 37 Install CV pane (1) for OPEN-V after clicking Set
- Figure 38 Install CV pane (1) for other than OPEN-V after clicking Set
- Figure 39 Install CV pane (2)
- Figure 40 Select an LDEV number
- Figure 41 Setting the SSID
- Figure 42 Customized volume screen
- Deleting custom volumes (Volume to Space)
- Creating initial custom volumes for OPEN-V (Make Volume)
- Initializing custom volumes for other than OPEN-V (Volume Initialize)
- Formatting LDEVs
- Formatting all blocked volumes
- Operational restrictions
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 250 |
| Size: | 2.62 MB |
Show table of contents
Read manual
Document Outline
- XP LUN Configuration and Security Manager User Guide
- 1 Overview of XP LUN Configuration and Security Manager Software
- Configuring LU paths
- Configuring XP Secure Manager
- Configuring LUs for use by RAID Manager XP
- Fibre Channel ports
- iSCSI port and iSNS server settings
- Status of connections between hosts and the array
- User authentication (Fibre Channel environments)
- User authentication (iSCSI environments)
- NAS channel adapters
- 2 Preparing to use XP LUN Configuration and Security Manager Software
- 3 XP LUN Configuration and Security Manager Software panes
- 4 XP LUN Configuration and Security Manager Software operations
- Starting XP LUN Configuration and Security Manager Software
- Defining LU paths
- Changing or viewing LU path settings
- Deleting LU paths
- Changing a host group's name and host mode
- Changing an iSCSI target's name and host mode
- Deleting host groups
- Deleting iSCSI targets
- Initializing host group 0 (zero)
- Initializing iSCSI target 0 (zero)
- Changing a host bus adapter's WWN and nickname
- Changing a host bus adapter's iSCSI name and nickname
- Deleting host bus adapters from host groups
- Deleting host bus adapters from iSCSI targets
- Deleting unneeded WWNs from the WWN name table
- Deleting (initializing) unneeded iSCSI names
- Viewing a list of concatenated parity groups
- Defining and viewing alternate paths
- Using XP Secure Manager
- Configuring arrays for using RAID Manager XP commands
- Configuring Fibre Channel ports
- Making settings on iSCSI ports and iSNS servers
- Checking the status of the connection between hosts and the array (iSCSI environments only)
- Setting user authentication (Fibre Channel environments)
- Enabling and disabling authentication of hosts in host groups
- Registering a host's user information on a host group
- Changing a host's user information (Fibre Channel environments)
- Deleting a host's user information (Fibre Channel environments)
- Specifying a host group's user information (when performing mutual authentication)
- Clearing a host group's user information (when performing mutual authentication)
- Settings and connection results in authentication of hosts (Fibre Channel environments)
- Settings and connection results in authentication of Fibre Channel switches
- Specifying a Fibre Channel port's information
- Registering a Fibre Channel port's user information
- Registering a Fibre Channel switch's user information
- Clearing a Fibre Channel switch's user information
- Specifying a Fibre Channel switch's authentication mode
- Specifying whether a Fibre Channel switch can perform authentication
- Setting user authentication (iSCSI environments)
- Enabling and disabling authentication of hosts on iSCSI targets
- Registering a host's user information on an iSCSI target
- Changing a host's user information
- Deleting a host's user information (iSCSI environments)
- Specifying an iSCSI target's user information (when performing mutual authentication)
- Clearing an iSCSI target's user information (when performing mutual authentication)
- Settings and connection results in authentication of hosts (iSCSI environments)
- Operating NAS channel adapters
- 5 Troubleshooting XP LUN Configuration and Security Manager Software
- 6 Finding an open-system host's World Wide Name (WWN)
- 7 Overview of Volume Manager and Custom Volume Size
- 8 Preparing to use Volume Manager or Custom Volume Size
- 9 Volume Manager operations
- Volume Manager panes
- Volume Manager operations
- 10 Custom Volume Size operations
- Custom Volume Size panes
- Customized Volume pane
- Volume to Space Confirmation pane
- Install CV pane (1)
- Install CV pane (2)
- Install CV pane (3)
- Install CV pane (4)
- Make Volume pane
- Make Volume pane (2)
- Make Volume pane (3)
- Make Volume pane (4)
- Volume Initialize pane (1)
- Volume Initialize pane (2)
- Volume Initialize pane (3)
- Concatenation List pane
- Format All pane
- Write to Control Blocks pane
- Performing Custom Volume Size operations
- Before starting CVS operations
- CVS operations
- Viewing current CVS configuration information
- Viewing concatenated parity groups
- Converting logical volumes to space
- Creating CVS volumes (Install CV operation)
- Deleting CVS volumes
- Converting CVs back to FVs (Volume Initialize operation)
- Re-creating CVs after initializing the VDEV (Make Volume operation)
- Formatting LDEVs
- Making external mainframe volumes usable
- Custom Volume Size panes
- 11 Troubleshooting Volume Manager and Custom Volume Size
- 12 Support and other resources
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 108 |
| Size: | 4.18 MB |
Show table of contents
Read manual
Document Outline
- XP24000/XP20000 LUN Manager User Guide
- Contents
- 1 Overview of LUN Manager Operations
- 2 About LUN Manager Operations
- 3 Preparing for LUN Manager Operations
- 4 Using the LUN Manager GUI
- 5 Performing LUN Manager Operations
- Launching LUN Manager for Fibre Channel Operations
- Defining Fibre Channel LU Paths
- Setting Fibre Channel Authentication
- Changing the Fibre Channel LU Path Settings
- Configuring Fibre Channel Ports
- Viewing a List of Concatenated Parity Groups
- Deleting LU Paths
- Defining and Viewing Alternate Paths
- Using LUN Security
- Configuring the Storage System for Using RAID Manager
- Setting UUID
- Clearing the setting of UUID
- 6 Performing LUN Manager Operations Using Configuration File Loader
- 7 Troubleshooting
- 8 Support and Other Resources
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 122 |
| Size: | 2.14 MB |
Show table of contents
Read manual
Document Outline
- XP24000/XP20000 Snapshot User Guide
- Contents
- 1 Overview of HP StorageWorks XP Snapshot Software
- 2 About XP Snapshot Operations
- 3 Preparing for XP Snapshot Operations
- 4 Using the XP Snapshot GUI
- 5 Performing XP Snapshot Operations
- XP Snapshot Processes
- Configuring the Volume List
- Deleting the Settings in Preview List
- Creating or Deleting Pools
- Creating or Deleting Virtual Volumes
- Creating XP Snapshot Pairs
- Storing XP Snapshot Data
- Storing XP Snapshot Data by Consistency Group with At-Time Snapshot Function
- Restoring XP Snapshot Pairs
- Deleting XP Snapshot Data
- Deleting XP Snapshot Pairs
- Viewing Detailed Volume and Pair Information
- Viewing S-VOL Path Information
- Viewing the Number of Pairs and License Information
- Displaying the Operation History
- 6 Troubleshooting
- 7 Support and other resources
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 32 |
| Size: | 884 KB |
Show table of contents
Read manual
Document Outline
- HP StorageWorks XP24000 Data Retention Utility User's Guide
- About this Guide
- 1 About HP StorageWorks XP Data Retention Utility Operations
- 2 Preparing for Data Retention Utility Operations
- 3 Using the Data Retention Utility GUI
- 4 Performing Data Retention Utility Operations
- Changing the Access Attributes
- Extending the Data Retention Term
- Prohibiting Changes to Read/Write Even When the Retention Term is Over (Enabling/Disabling the Expiration Lock Function)
- Protecting Logical Volumes Against Storage System Copy Operations (Setting the S-VOL Disable Function)
- Preventing Remote Web Console Users from Configuring LU Paths and Command Devices (Setting the Reserve Function)
- Viewing a List of Logical Volumes Combined into a LUSE Volume
- 5 Troubleshooting
- A Acronyms and Abbreviations
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 38 |
| Size: | 1.06 MB |
Show table of contents
Read manual
Document Outline
- HP StorageWorks XP Disk/Cache Partition user guide for XP12000/XP10000 Disk Arrays and SVS 200
| Recognized languages: | English |
|---|---|
| Pages: | 200 |
| Size: | 2.48 MB |
Show table of contents
Read manual
Document Outline
- External Storage XP user guide for the XP12000, XP10000, SVS200
- Table of Contents
- About this guide
- 1 Overview of connecting external arrays
- 2 Preparing for External Storage XP operations
- System requirements
- External Storage XP requirements
- Installing External Storage XP
- Preparing for External Storage XP settings
- Powering arrays on or off
- Using mapped external LUs from the host connected to the local array
- Uninstalling External Storage XP
- Limitations on External Storage XP operations
- Combining External Storage XP with other HP StorageWorks products
- 3 Managing cache with external storage
- 4 External Storage XP panes
- 5 Configuring external LUs
- Overview of configuring external LUs
- Setting an external array's port
- Setting a local array's port attributes
- Discovering and Mapping LUs
- Setting alternate paths for external LUs
- Adding alternate paths by selecting multiple external LUs (Add Paths)
- Deleting alternate paths by selecting multiple external LUs (Delete Paths)
- Checking an external LU's status (LDEV Information)
- Disconnecting external arrays or LUs
- Checking the connection status and resuming external LU operations (Check Paths & Restore Vol.)
- Restoring external LUs (LDEV Restore)
- Changing the cache mode setting of the external LU
- Changing the cache mode of all external LUs in an external array
- Changing the cache mode of an individual external LU
- Stopping the use of paths to an external LU by specifying an external array's WWN (Disconnect Paths)
- Restoring paths to an external LU by specifying an external array's WWN (Check Paths)
- Changing an external array's port setting
- Stopping the use of paths to an external LU by specifying a local array's port (Disconnect Paths)
- Restoring paths to an external LU by specifying a local array's port (Check Paths)
- Deleting external LU mappings (Delete LU)
- 6 Troubleshooting NAS Blade systems that include external arrays
- 7 Remote command devices
- 8 Troubleshooting External Storage XP
- A Notes on connecting external arrays
- Connecting Thunder 9500V subsystems
- System parameters for connecting Thunder 9500V subsystems
- Relation btw. ser. nums. in the Dev. list on LU Op. pane & Thunder 9500V subsys. mod.
- Relationship between the WWN of the port on the Thunder 9500V subsystem and the controller
- Path status and examples of recovery procedures (Thunder 9500V subsystems)
- Connecting TagmaStore AMS and TagmaStore WMS subsystems
- System parameters for connecting TagmaStore AMS and TagmaStore WMS subsystems
- Rel. btw. ser. numbs. in Dev. list on the LU Op. pane & T-Stor. AMS & T-Stor. WMS subsys. mods.
- Relation btw. the WWN of the port on the TagmaStore AMS or TagmaStore WMS subsys. and contr.
- Path status and examples of rec. proce. (TagmaStore AMS and TagmaStore WMS subsys.)
- Connecting XP12000/XP10000 Disk Arrays
- Connecting XP1024/XP128 Disk Arrays
- Connecting XP512/XP48 Disk Arrays
- Connecting HP 200 Storage Virtualization System as external storage
- Connecting EVA arrays
- Connecting Thunder 9500V subsystems
- B Required volume capacity for emulation types
- C Adjusting volume capacity for copy pair setting
- D Configuring MSA1000/1500 as external arrays
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 116 |
| Size: | 3.34 MB |
Show table of contents
Read manual
Document Outline
- 1 Overview of HP Solutions
- 2 Overview of Hitachi ShadowImage™ for z/OS Operations
- 3 Preparing for Hitachi ShadowImage™ for z/OS Operations
- 4 Performing Hitachi ShadowImage™ for z/OS Operations
- 5 Using PPRC Commands for Hitachi ShadowImage™ for z/OS
- 6 Using XP for Business Continuity Manager Software
- 7 Troubleshooting
| Recognized languages: | English |
|---|---|
| Pages: | 79 |
| Size: | 1.29 MB |
| Recognized languages: | English |
|---|---|
| Pages: | 90 |
| Size: | 1.20 MB |
Show table of contents
Read manual
Document Outline
- Contents
- Performance Control XP
- Optimal performance of high-priority hosts
- Automatically disable upper limit control
- Overview of Performance Control XP procedures
- Notes on using Performance Control XP
- Performance Control XP restrictions
- Using Performance Control XP
- Starting Performance Control XP
- Performance Control pane
- Managing traffic between HBAs and ports
- Setting the priority of ports on disk arrays
- Measuring traffic between host bus adapters and ports for many-to-many connections
- Analyzing traffic statistics
- Setting upper limit values for traffic at non-prioritized ports or WWNs
- Setting thresholds
- Changing PFC names of host bus adapters (many-to-many connections only)
- Replacing host bus adapters (many-to-many connections only)
- Grouping host bus adapters
- Troubleshooting Auto LUN/Performance Control Base Monitor and Performance Control XP
- Performance Control Export Tool
- Overview of Auto LUN XP
- Exporting monitoring data to files
- Figure 17 Sample text file
- Files to be exported
- Table 2 Auto LUN XP panes and monitoring data that can be saved by the Export Tool
- Table 3 Files containing statistics about resource usage and write pending rates (continued)
- Table 4 Files containing statistics about parity, external volume, and V-VOL groups
- Table 5 Files containing statistics about logical volumes in parity, external volume, or V-VOL groups (continued)
- Table 6 Files containing statistics about ports
- Table 7 Files containing statistics about host bus adapters connected to ports
- Table 8 Files containing statistics about LU paths
- Table 9 Files containing statistics about SPM groups
- Table 10 Files containing statistics about host bus adapters belonging to SPM groups
- Table 11 Files containing statistics about remote copy operations by Continuous Access XP and TrueCopy for z/OS (in the whole disk array)
- Table 12 Files containing statistics about remote copy operations by Continuous Access XP and TrueCopy for z/OS (at LU paths)
- Table 13 Files containing statistics about remote copy operations by Continuous Access XP and TrueCopy for z/OS (at logical volumes controlled by a particular CU) (continued)
- Table 14 Files containing statistics about remote copy operations by Continuous Access XP and TrueCopy for z/OS (at CLPR)
- Table 15 Files containing statistics about remote copy operations by Continuous Access XP Journal and Universal Replicator for z/OS (in the whole disk array)
- Table 16 Files containing statistics about remote copy operations by Continuous Access XP and Universal for z/OS (at journal groups)
- Table 17 Files containing statistics about remote copy operations by Continuous Access XP Journal and Universal Replicator for z/OS (at LU paths)
- Table 18 Files containing statistics about remote copy operations by Continuous Access XP Journal and Universal Replicator for z/OS (at logical volumes controlled by a particular CU)
- Preparing for using the Export Tool
- Using the Export Tool
- Command reference
- Table 22 Subcommand list (continued)
- Command syntax
- The svpip subcommand
- The retry subcommand
- The login subcommand
- The show subcommand
- The group subcommand
- The shortrange subcommand
- The longrange subcommand
- The outpath subcommand
- The option subcommand
- The apply subcommand
- The set subcommand
- The help subcommand
- The java command for exporting data In files
- Troubleshooting the Export Tool
- Limitations for storage partition administrators
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 36 |
| Size: | 299 KB |
Show table of contents
Read manual
Document Outline
- XP24000/XP20000 Database Validator User's Guide
- 1 Overview of HP Database Validator
- 2 About Database Validator Operations
- 3 Preparing for Database Validator Operations
- 4 Performing Database Validator Operations
- Starting Database Validator Operations
- Sample Implementation of Database Validator
- Implementing Database Validator on HP-UX Logical Volumes
- Creating the Database
- Error Detection and Recovery
- 5 Troubleshooting
- 6 Support and Other Resources
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 38 |
| Size: | 440 KB |
Show table of contents
Read manual
Document Outline
- XP24000/XP20000 Data Retention Utility User Guide
- Contents
- 1 About XP Data Retention Utility Operations
- 2 Preparing for Data Retention Utility Operations
- 3 Using the Data Retention Utility GUI
- 4 Performing Data Retention Utility Operations
- Changing the Access Attributes
- Extending the Data Retention Term
- Prohibiting Changes to Read/Write Even When the Retention Term is Over (Enabling/Disabling the Expiration Lock Function)
- Protecting Logical Volumes Against Storage System Copy Operations (Setting the S-VOL Disable Function)
- Preventing Remote Web Console Users from Configuring LU Paths and Command Devices (Setting the Reserve Function)
- Viewing a List of Logical Volumes Combined into a LUSE Volume
- 5 Troubleshooting
- 6 Support and Other Resources
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 82 |
| Size: | 2.96 MB |
Show table of contents
Read manual
Document Outline
- HP StorageWorks XP 24000 Snapshot User's Guide
- About this Guide
- 1 Overview of HP StorageWorks XP Snapshot
- 2 About XP Snapshot Operations
- 3 Preparing for XP Snapshot Operations
- 4 Using the XP Snapshot GUI
- 5 Performing XP Snapshot Operations
- XP Snapshot Processes
- Configuring the Volume List
- Deleting the Settings in Preview List
- Creating or Deleting Pools
- Creating or Deleting Virtual Volumes
- Creating XP Snapshot Pairs
- Storing Snapshot Data
- Restoring XP Snapshot Pairs
- Deleting Snapshot Data
- Deleting XP Snapshot Pairs
- Viewing Detailed Volume and Pair Information
- Viewing S-VOL Path Information
- Viewing the Number of Pairs and License Information
- Displaying the Operation History
- 6 Troubleshooting
- A Acronyms and Abbreviations
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 84 |
| Size: | 1.28 MB |
Show table of contents
Read manual
Document Outline
- Contents
- LUN Manager for the XP10000/XP12000
- LU configuration overview
- Supported emulation types
- LU paths
- Configuring LU paths in a Fibre Channel environment
- 16-Port FC/CA CHIP product
- Host groups
- Host modes
- LUN Security
- RAID Manager command devices
- Fibre Channel port attributes
- LUN Manager operations
- Starting LUN Manager
- LUN Manager pane
- Defining LU paths
- Changing or viewing LU path settings
- Defining alternate paths
- Viewing alternate paths
- Deleting WWNs
- Applying and removing LUN security
- Creating RAID Manager Command Devices
- Port Operations
- Operational restrictions
- Volume Management for the XP10000/XP12000
- Volume Management (LU Size Expansion)
- Volume Size Configuration (VSC)
- VSC operations
- Parity group configuration
- Volume to Space operation
- Install Custom Volume (CV) operation
- Table 13 Creating VSC volumes by Install CV (for OPEN-V)
- Table 14 VSC supported emulations
- Table 15 Install Custom Volume operation parameters for mainframe and open system volumes
- Table 16 Capacities of open system custom volume sizes
- Calculating CV capacity for mainframe systems
- Calculating CV capacity for open systems
- Volume Initialize and Make Volume operations
- LUSE operations
- Starting LUSE operations
- Volume Management pane
- Viewing LUSE configuration information
- Viewing concatenated parity groups
- Creating a LUSE volume using the Volume Count list
- Creating a LUSE volume using the Select an LDEV list
- Creating a LUSE volume using the LDEV information table
- Releasing a LUSE volume
- Changing LUSE capacities
- Resetting an unregistered LUSE volume
- VSC Operations
- Starting VSC operations
- Customized Volume pane
- Viewing VSC configuration information
- Viewing concatenated parity groups
- Converting volumes to space (Volume to Space)
- Creating custom volumes (Install CV)
- Figure 23 Install CV pane (1) for OPEN-V (when two or more free spaces are available)
- Figure 24 Install CV pane (1) for other than OPEN-V
- Figure 25 Install CV pane (1) for OPEN-V after clicking Set
- Figure 26 Install CV pane (1) for other than OPEN-V after clicking Set
- Figure 27 Install CV pane (2)
- Figure 28 Select an LDEV number
- Figure 29 Setting the SSID
- Figure 30 Customized volume screen
- Deleting custom volumes (Volume to Space)
- Creating initial custom volumes for OPEN-V (Make Volume)
- Initializing custom volumes for other than OPEN-V (Volume Initialize)
- Formatting LDEVs
- Formatting all blocked volumes
- Writing to control blocks
- Making external mainframe volumes usable
- Operational restrictions
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 65 |
| Size: | 988 KB |
Show table of contents
Read manual
Document Outline
- Contents
- Auto LUN XP for the XP12000/XP10000
- Auto LUN XP features
- Auto LUN XP tasks
- Reserve volumes
- Volume migration
- Estimating usage rates
- Automatic migration
- Manual migration
- Requirements and restrictions
- Selection of CU group
- Logical volumes
- Source volumes
- LUSE source volumes
- Target volumes
- Number of volumes
- Calculating the number of Auto LUN XP concurrent migration plans
- Auto migration planning
- Auto migration execution
- Manual migration execution
- Copy Threshold option
- Progress value
- Effects on other XP products
- Maintenance
- Auto migration parameters
- Powering off disk arrays
- Starting Auto LUN XP
- Creating and executing migration plans
- Troubleshooting Auto LUN XP
- Using RAID Manager for manual Auto LUN XP migrations
- Auto LUN/Performance Control Base Monitor
- Auto LUN XP statistics
- Usage statistics
- Collecting usage statistics about disk array resources
- Viewing parity group usage statistics
- Viewing logical volume usage statistics
- Viewing channel adapter (CHA) usage statistics
- Viewing channel processor (CHP) usage statistics
- Viewing disk adapter (DKA) usage statistics
- Viewing disk processor (DKP) usage statistics
- Viewing data recovery and reconstruction processor (DRR) usage statistics
- Viewing write pending rates
- Viewing access path usage statistics
- Workload and traffic statistics
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 244 |
| Size: | 5.59 MB |
Show table of contents
Read manual
Document Outline
- Hitachi Universal Replicator™ for Mainframe User Guide
- Contents
- 1 Overview of Universal Replicator for Mainframe
- 2 About Universal Replicator for Mainframe Operations
- Functionality Overview
- Components
- Remote Copy Operations
- Journal Processing
- Universal Replicator for Mainframe Delta Resync Operation
- Journal Obtain in TrueCopy for Mainframe Synchronous Secondary Site
- Switching the Master Journal Group of Universal Replicator for Mainframe
- Pair Status
- XP for Business Continuity Manager Software Support
- 3 Preparing for Universal Replicator for Mainframe Operations
- Requirements and Restrictions for Universal Replicator for Mainframe
- Installing the Hardware
- Enabling the Universal Replicator for Mainframe Option(s)
- Using Multiple Primary and Secondary Storage Systems
- Interoperability with Other Products and Functions
- Virtual LVI
- Cache Residency Manager
- ShadowImage for Mainframe
- Using the At-Time Split Function When Combining Universal Replicator for Mainframe with ShadowImage for Mainframe
- TrueCopy for Mainframe Synchronous (3DC Cascading Configuration)
- TrueCopy for Mainframe Synchronous (3DC Multi-target Configuration)
- Hardware Configuration
- Setup Procedure
- Requirements for Creating Universal Replicator for Mainframe Pair for the Delta Resync Operation
- Requirements for Performing a Delta Resync Operation
- Configuring Delta Resync Operation Environment to Support Remote Command Devices
- Changing to 3DC Multi-target Configuration after Recovering from Primary Site Failures
- Transferring Business Tasks from the TrueCopy for Mainframe Secondary Site to the Primary Site (in a 3DC Cascading Configuration)
- Transferring Business Tasks from the TrueCopy for Mainframe Secondary Site to the Primary Site (in a 3DC Multi-target Configuration)
- Transferring Business Tasks from TrueCopy for Mainframe Secondary Site to the Primary Site (When the Delta Resync Operation is Performed in 3DC Multi-target Configuration)
- Recovering from Failures in the Primary Site and the TrueCopy for Mainframe Synchronous Secondary Site
- Transferring Business Tasks from the Universal Replicator for Mainframe Secondary Site to the Primary Site
- XP Auto LUN
- Compatible FlashCopy V2
- Planning for Journal Volumes
- Contributing Factors for the Data Transfer Speed between Storage Systems
- Configuration where XP12000/XP10000 and XP24000/XP20000 Disk Arrays are Connected
- 4 Using the Universal Replicator for Mainframe GUI
- 5 Configuring Storage Systems and Logical Paths
- Reviewing Storage System and Logical Paths
- Configuring Port Attributes
- Configuring Storage System Options
- Establishing the Relationship between Primary and Secondary Storage Systems (Add DKC)
- Changing Options for Logical Paths and Storage Systems
- Adding Logical Paths
- Viewing the Status of Logical Paths
- Deleting Logical Paths
- Managing SIMs
- Managing Power for Storage Systems and Network Relay Devices
- Removing the Relationship Between the Primary and the Secondary Storage Systems
- 6 Configuring Journal Groups
- Reviewing Administrator Tasks for Managing Journals
- Registering Journal Volumes in a Journal Group
- Deleting Journal Volumes from a Journal Group
- Displaying Detailed Information about a Journal Group
- Changing Options for a Journal Group
- Deleting a Journal Group
- Splitting a Mirror (Suspending a Copy Operation)
- Restoring a Mirror (Resuming a Copy Operation)
- Deleting Data Volumes from a Mirror (Ending a Copy Operation)
- Assigning Remote Command Devices to Mirrors
- Releasing Assigned Remote Command Device
- 7 Using Extended Consistency Groups
- 8 Performing Pair Operations
- Filtering Information in the List in the Pair Operation Window
- Creating a Pair of Data Volumes
- Displaying Detailed Information about a Pair of Data Volumes
- Saving Pair Status Information into a Text File
- Changing Options for a Data Volume Pair
- Splitting a Pair of Data Volumes
- Restoring a Pair of Data Volumes
- Releasing a Pair of Data Volumes
- Recovering a Pinned Track
- 9 Using Spreadsheets for Universal Replicator for Mainframe Operations
- 10 Usage Monitor Window Operations
- 11 Usage Scenarios
- Creating a Point-in-Time Copy of Data Volumes
- Performing Disaster Recovery Operations
- Preparing for Disaster Recovery Operations
- File and Database Recovery Procedures
- Switching Operations to the Secondary Site
- Transferring Operations Back to the Primary Site
- Resuming Normal Operations at the Primary Site
- Disaster Recovery for Multiple Primary and Secondary Storage Systems
- Disaster Recovery in a 3DC Cascading Configuration
- Recovering from a Disaster at the Main Site in a 3DC Multi-Target Configuration
- Recovering from Failures in the Primary Site (When the Delta Resync Operation is Performed)
- 12 Troubleshooting
- 13 Support and Other Resources
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 161 |
| Size: | 2.84 MB |
Show table of contents
Read manual
Document Outline
- XP24000/XP20000 for FlashCopy Mirroring Software User Guide
- Contents
- 1 About Version 1 Operations
- 2 Preparing for Version 1 Operations
- 3 Using the Version 1 GUI
- 4 Performing Version 1 Operations
- 5 About Version 2 Operations
- How Version 2 Works
- Establishing a Version 2 Relationship
- Copy Modes
- Copying by Volume
- Copying by Dataset
- Using Consistency Groups for Dataset Copies that Span Volumes
- Incremental FlashCopy Function
- Reverse Restore Function
- Fast Reverse Restore Function
- FlashCopy to PPRC Primary Volume Function
- Remote FlashCopy Function
- FlashCopy to Universal Replicator for Mainframe Primary Volume Function
- Preserve Mirror FlashCopy Function
- Releasing Version 2 Relationships
- Interoperability With Other Products and Functions
- Optimization of Volumes
- 6 Preparing for Version 2 Operations
- 7 Using the Version 2 GUI
- 8 Performing Version 2 Operations
- Commands for Version 2 Operations
- Setting Options
- Establishing Version 2 Relationships
- Establishing Version 2 Relationships by Volumes Using TSO Command
- Establishing Version 2 Relationships by Volumes Using the DFSMSdss Command
- Establishing Version 2 Relationships by Volumes Using the ICKDSF Command
- Creating Version 2 Pairs by Using Incremental FlashCopy (Restore): FLASHCPY ESTABLISH
- Creating Version 2 Pairs by Using Incremental FlashCopy (Reverse Restore): FLASHCPY ESTABLISH
- Establishing Version 2 Relationships by Volumes Using the ANTRQST Macro Command
- Establishing Version 2 Relationships by Extents Using the TSO Command
- Establishing Version 2 Relationships by Extents Using the DFSMSdss Command
- Establishing Version 2 Relationships by Extents Using the ANTRQST Macro Command
- Establishing Version 2 Relationships while Suspending Write Operations to S-VOLs
- Releasing a Version 2 Relationship
- Releasing a Version 2 Relationship Using the TSO Command
- Case 1: TDEVN Specified, DDSW = NO
- Case 2: TDEVN Specified, DDSW = NO, XTNTLST Parameter Specified
- Case 3: SDEVN and TDEVN Specified, DDSW = NO
- Case 4 (a, b): SDEVN and TDEVN Specified, DDSW = NO, XTNTLST Parameter Specified
- Case 5: SDEVN and TDEVN Specified, DDSW = YES
- Case 6: SDEVN and TDEVN Specified, DDSW = YES, XTNTLST Parameter Specified
- Case 7: DEVN Specified, ACTION = THAW
- Releasing a Version 2 Relationship Using the ICKDSF Command
- Releasing a Version 2 Relationship Using the ANTRQST Macro Command
- Releasing a Version 2 Relationship Using the TSO Command
- Viewing Information for a Version 2 Relationship
- Viewing Relationship Status of Version 2 Using the TSO Command
- Viewing Relationship Status of Version 2 Using the ICKDSF Command
- Displaying Information on Version 2 Pairs: FLASHCPY QUERY
- Viewing Relationship Status of Version 2 Using the ANTRQST Macro Command
- Viewing Resource Information for Version 2 Using Remote Web Console
- Viewing the Number of Relationships and License Information for Version 2 Using Remote Web Console
- Viewing Operation History Using Remote Web Console
- 9 Comparison of Versions 1 and 2
- 10 Feature Comparison with the IBM Product
- 11 Troubleshooting
- 12 Support and Other Resources
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 80 |
| Size: | 1.95 MB |
Show table of contents
Read manual
Document Outline
- XP24000/XP20000 Auto LUN Software User Guide
- Contents
- 1 Overview of HP StorageWorks XP Auto LUN Software
- 2 About XP Auto LUN Operations
- 3 Using the XP Auto LUN GUI
- 4 XP Auto LUN Operations
- 5 Using RAID Manager for Manual Volume Migration
- 6 Troubleshooting
- 7 Support and Other Resources
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 96 |
| Size: | 4.38 MB |
Show table of contents
Read manual
Document Outline
- HP StorageWorks XP24000 Business Copy Software User's Guide
- About this Guide
- 1 Overview of HP StorageWorks XP Business Copy Software
- 2 About Business Copy Operations
- 3 Preparing for Business Copy Operations
- 4 Using the Business Copy GUI
- 5 Performing Business Copy Operations
- Configuring the Volume List
- Changing or Deleting the Settings in Preview List
- Setting or Resetting the Reserve Attribute
- Setting Options
- Creating Pairs
- Splitting Pairs
- Suspending Pairs
- Resynchronizing Pairs
- Deleting Pairs
- Viewing Detailed Volume and Pair Information
- Viewing S-VOL Path Information
- Viewing the Number of Pairs and License Information
- Viewing Pair Operation History
- 6 Troubleshooting
- A Acronyms and Abbreviations
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 155 |
| Size: | 3.55 MB |
Show table of contents
Read manual
Document Outline
- XP24000/XP20000 for FlashCopy Mirroring Software User Guide
- Contents
- 1 About Version 1 Operations
- 2 Preparing for Version 1 Operations
- 3 Using the Version 1 GUI
- 4 Performing Version 1 Operations
- 5 About Version 2 Operations
- How Version 2 Works
- Establishing a Version 2 Relationship
- Copy Modes
- Copying by Volume
- Copying by Dataset
- Using Consistency Groups for Dataset Copies that Span Volumes
- Incremental FlashCopy Function
- Reverse Restore Function
- Fast Reverse Restore Function
- FlashCopy to PPRC Primary Volume Function
- Remote FlashCopy Function
- FlashCopy to Universal Replicator for Mainframe Primary Volume Function
- Preserve Mirror FlashCopy Function
- Releasing Version 2 Relationships
- Interoperability With Other Products and Functions
- Optimization of Volumes
- 6 Preparing for Version 2 Operations
- 7 Using the Version 2 GUI
- 8 Performing Version 2 Operations
- Commands for Version 2 Operations
- Setting Options
- Establishing Version 2 Relationships
- Establishing Version 2 Relationships by Volumes Using TSO Command
- Establishing Version 2 Relationships by Volumes Using the DFSMSdss Command
- Establishing Version 2 Relationships by Volumes Using the ICKDSF Command
- Creating Version 2 Pairs by Using Incremental FlashCopy (Restore): FLASHCPY ESTABLISH
- Creating Version 2 Pairs by Using Incremental FlashCopy (Reverse Restore): FLASHCPY ESTABLISH
- Establishing Version 2 Relationships by Volumes Using the ANTRQST Macro Command
- Establishing Version 2 Relationships by Extents Using the TSO Command
- Establishing Version 2 Relationships by Extents Using the DFSMSdss Command
- Establishing Version 2 Relationships by Extents Using the ANTRQST Macro Command
- Establishing Version 2 Relationships while Suspending Write Operations to S-VOLs
- Releasing a Version 2 Relationship
- Releasing a Version 2 Relationship Using the TSO Command
- Case 1: TDEVN Specified, DDSW = NO
- Case 2: TDEVN Specified, DDSW = NO, XTNTLST Parameter Specified
- Case 3: SDEVN and TDEVN Specified, DDSW = NO
- Case 4 (a, b): SDEVN and TDEVN Specified, DDSW = NO, XTNTLST Parameter Specified
- Case 5: SDEVN and TDEVN Specified, DDSW = YES
- Case 6: SDEVN and TDEVN Specified, DDSW = YES, XTNTLST Parameter Specified
- Case 7: DEVN Specified, ACTION = THAW
- Releasing a Version 2 Relationship Using the ICKDSF Command
- Releasing a Version 2 Relationship Using the ANTRQST Macro Command
- Releasing a Version 2 Relationship Using the TSO Command
- Viewing Information for a Version 2 Relationship
- Viewing Relationship Status of Version 2 Using the TSO Command
- Viewing Relationship Status of Version 2 Using the ICKDSF Command
- Displaying Information on Version 2 Pairs: FLASHCPY QUERY
- Viewing Relationship Status of Version 2 Using the ANTRQST Macro Command
- Viewing Resource Information for Version 2 Using Remote Web Console
- Viewing the Number of Relationships and License Information for Version 2 Using Remote Web Console
- Viewing Operation History Using Remote Web Console
- 9 Comparison of Versions 1 and 2
- 10 Feature Comparison with the IBM Product
- 11 Troubleshooting
- 12 Support and Other Resources
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 200 |
| Size: | 2.90 MB |
Show table of contents
Read manual
Document Outline
- HP StorageWorks Continuous Access XP Journal user guide
- Contents
- About this guide
- 1 Overview of HP copy solutions
- 2 Overview of Continuous Access XP Journal
- Overview of functionality
- Components
- Figure 2 Continuous Access XP Journal components
- Figure 3 Connection configuration for multiple secondary arrays
- Local arrays
- Main and remote control units (primary and secondary arrays)
- Journal groups
- Data volume pairs
- Journal volumes
- Consistency groups
- Remote copy connections
- Initiator and RCU target ports
- Continuous Access XP Journal Graphical User Interface
- Host failover software
- Remote copy operations
- Journal processing
- Journal group operations
- Continuous Access XP Journal data volume pair status
- 3 Continuous Access XP Journal operations requirements and restrictions
- System requirements
- Requirements and Restrictions for Continuous Access XP Journal
- Installing hardware
- Enabling Continuous Access XP Journal options
- Planning for journal volumes
- Considerations
- Planning process
- Factors that determine the data transfer speed between the primary and secondary arrays
- Configuring primary and secondary arrays for Continuous Access XP Journal operations
- Combining Continuous Access XP Journal with other data management functions
- Table 18 Whether non-Continuous Access XP Journal volumes can be used as Continuous Access XP Journal volumes
- Combining Continuous Access XP Journal with Virtual LUN
- Combining Continuous Access XP Journal with Cache LUN XP
- Combining Continuous Access XP Journal with LUN Manager
- Combining Continuous Access XP Journal and Performance Control XP
- Combining Continuous Access XP Journal and Business Copy XP
- Table 19 Host pair status reporting for Continuous Access XP Journal/Business Copy XP shared volumes
- Table 20 Data currency of a shared Continuous Access XP Journal/Business Copy XP volume
- Figure 14 Shared Continuous Access XP Journal secondary data volume and Business Copy XP P-VOL
- Figure 15 Shared Continuous Access XP Journal secondary data volume and Business Copy XP P-VOL
- Figure 16 Shared Continuous Access XP Journal primary data volume and Business Copy XP P-VOL, and Continuous Access XP Journal secondary data volume and Business Copy XP P-VOL
- Figure 17 Business Copy XP S-VOL in PSUS status functioning as Continuous Access XP Journal primary data volume
- Figure 18 Restoring Business Copy XP P-VOLs, step 1
- Figure 19 Restoring Business Copy XP P-VOLs, step 2
- Figure 20 Restoring Business Copy XP P-VOLs, step 3
- Figure 21 Restoring Business Copy XP P-VOLs, step 4
- Figure 22 Restoring Business Copy XP P-VOLs, step 5
- Figure 23 Restoring Business Copy XP P-VOLs, step 6
- Figure 24 Restoring Business Copy XP P-VOLs, step 7
- Figure 25 Restoring Business Copy XP P-VOLs, step 8
- Figure 26 Restoring Business Copy XP P-VOLs, step 9
- Combining Continuous Access XP Journal with Continuous Access XP (3DC cascading configuration)
- Combining Continuous Access XP Journal with Continuous Access XP Synchronous (3DC multi-target configuration)
- Figure 29 3DC multi-target configuration (combining Continuous Access XP Journal with Continuous Access XP Synchronous)
- Hardware configurations
- Setup procedure
- Recovering from primary site failures
- Changing to 3DC multi-target configurations after recovering from primary site failures
- Transferring business tasks from Continuous Access XP secondary sites to primary sites (in 3DC cascading configurations)
- Transferring business tasks from Continuous Access XP secondary sites to primary sites (in 3DC multi-target configurations)
- Recovering from primary site and Continuous Access XP Synchronous secondary site failures
- Transferring business tasks from Continuous Access XP Journal secondary sites to primary sites
- Combining Continuous Access XP Journal and LUN Security XP Extension
- 4 Configuring arrays and logical paths
- Displaying the DKC Operation pane
- Configuring port attributes
- Associating primary and remote arrays and configuring logical paths (Add DKC)
- Changing options for logical paths and arrays
- Adding logical paths
- Deleting logical paths
- Viewing the status of logical paths
- Removing the relationship between primary and secondary arrays
- 5 Using journal groups
- Displaying the Journal Operation pane
- Registering journal volumes in journal groups
- Deleting journal volumes from journal groups
- Displaying detailed information about journal groups
- Changing options for journal groups
- Deleting journal groups
- Splitting mirrors (Pairsplit-r: suspending copy operations)
- Restoring mirrors (Pairresync: resuming copy operations)
- Deleting data volumes from mirrors (Pairsplit-S: ending copy operations)
- 6 Performing Continuous Access XP Journal pair operations
- Displaying the Pair Operation pane
- Creating a pair of data volumes (Paircreate)
- Displaying detailed information about a pair of data volumes
- Changing options for data volume pairs
- Splitting a pair of data volumes
- Restoring a pair of data volumes
- Deleting a pair of data volumes
- Creating a Point-in-Time copy of data volumes
- 7 Monitoring remote copy operations
- 8 Viewing history of data volume pair operations
- 9 Performing optional operations
- 10 Disaster recovery operations
- 11 Continuous Access XP Journal operations with NAS Blade
- Overview of Continuous Access XP Journal operations in NAS Blade systems
- Scope of Continuous Access XP Journal functions with NAS Blade
- Scope related to Continuous Access XP Journal
- Scope related to RAID Manager XP
- Figure 68 Executing the pairdisplay command in RAID Manager XP using the sudo command
- Figure 69 Executing the pairdisplay command using a shell script created in the SSH Client (for SSH protocol version 2)
- Figure 70 Executing the inqraid command using the sudo command
- Figure 71 Executing the inqraid command using a shell script created in the SSH client (for SSH protocol version 2)
- Scope related to NAS Backup Restore features
- Scope related to other Hitachi Network Attached Storage products
- Prerequisites
- Notes on operations
- Preparing for Continuous Access XP Journal operations
- Preparing for Continuous Access XP Journal volume pair operations
- Registration of public key used for SSH
- Configuring the RAID Manager XP environment
- Log in to the target NAS package using SSH
- Configure RAID Manager XP configuration definition files
- Figure 72 Example of configuring a pair LU
- Adding the HORCM_DEV and HORCM_INST sections using the mkconf.sh command in RAID Manager XP
- Creating a template for a RAID Manager XP configuration definition file
- Editing the template for the RAID Manager XP configuration definition file
- Table 29 Configuration definition file settings (HORCM_MON, HORCM_CMD) and specified values in NAS Blade system
- Figure 75 Example 1: RAID Manager XP configuration definition file (for instance number 16)
- Figure 76 Command execution that lists LUs constituting the file system sample
- Figure 77 Example 2: RAID Manager XP configuration definition file (for instance number 16)
- Table 30 Configuration definition file settings (HORCM_INST) and specified values in NAS Blade system
- Figure 78 Example 3: RAID Manager XP configuration definition file (for instance number 16)
- Checking the contents of the RAID Manager XP configuration definition file
- Figure 79 Procedure for starting RAID Manager XP
- Figure 80 Checking LDEV numbers of LUs specified in the HORCM_DEV section
- Figure 81 Checking device file and LDEV numbers of P-VOLs
- Figure 82 Checking device file and LDEV numbers for unused device files that can be S-VOLs
- Table 31 Locations of NAS package and port names specified in RAID Manager XP configuration definition files
- Figure 83 Stopping RAID Manager XP (for instance number 16)
- Cascade configuration of Continuous Access XP Journal and Business Copy XP
- Figure 84 Example of a cascade configuration of Continuous Access XP Journal and Business Copy XP
- Figure 85 Example of RAID Manager XP configuration definition file at primary site (instance 16)
- Figure 86 Example of RAID Manager XP configuration definition file at secondary site (instance 16)
- Figure 87 Example of RAID Manager XP configuration definition file at secondary site (instance 17)
- Setting the RAID XP Manager user environmental variable
- Settings for disaster recovery
- Create file systems in Continuous Access XP Journal P-VOLs
- Overview of Continuous Access XP Journal operations
- Remote copy operations
- Figure 88 Overview of remote copy operations
- Starting Continuous Access XP Journal operations and creating Continuous Access XP Journal pairs
- Splitting Continuous Access XP Journal volume pairs
- Resynchronizing Continuous Access XP Journal volume pairs
- Deleting Continuous Access XP Journal volume pairs
- Disaster recovery operations
- Remote copy operations
- Operations of RAID Manager XP log files
- Commands
- Messages
- Notes on failures of external volumes
- 12 Troubleshooting
- A Power management for arrays and network relay devices
- B Pinned track recovery for Continuous Access XP Journal volumes
- C SIM reporting
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 109 |
| Size: | 3.21 MB |
Show table of contents
Read manual
Document Outline
- XP24000/XP20000 Business Copy Software User Guide
- Contents
- 1 Overview of HP XP Business Copy Software
- 2 About XP Business Copy Operations
- 3 Interoperability with Other Products and Functions
- 4 Preparing for XP Business Copy Operations
- 5 Using the XP Business Copy GUI
- 6 Performing XP Business Copy Operations
- Configuring the Volume List
- Changing or Deleting the Settings in Preview List
- Setting or Resetting the Reserve Attribute
- Setting Options
- Creating Pairs
- Splitting Pairs
- Suspending Pairs
- Resynchronizing Pairs
- Deleting Pairs
- Viewing Detailed Volume and Pair Information
- Viewing S-VOL Path Information
- Viewing the Number of Pairs and License Information
- Viewing Pair Operation History
- 7 Troubleshooting
- 8 Support and Other Resources
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 178 |
| Size: | 2.42 MB |
Show table of contents
Read manual
Document Outline
- Contents
- ShadowImage for the XP1024/XP128/XP12000/XP10000/SVS 200
- ShadowImage Components
- ShadowImage Requirements
- ShadowImage Operations
- ShadowImage Options
- At-Time Split Function
- ShadowImage Pair Status
- Cautions on Switching Off the Power Supply
- Cautions on Using the XP10000 Disk Array
- Preparing for ShadowImage Operations
- System Requirements
- Preparing for ShadowImage Operations
- Combining ShadowImage with Other Data Management Operations
- Combining ShadowImage and TrueCopy Operations
- Table 10 Host pair status reporting for SI390/TC390 shared volumes
- Table 11 Currency of a shared SI390 and TC390 volume
- Figure 10 SI390 and TC390: shared S-VOL/M-VOL
- Figure 11 SI390 and TC390: shared S-VOL/R-VOL
- Figure 12 SI390 and TC390: shared S-VOL/M-VOL and S-VOL/R-VOL
- Figure 13 SI390 and TC390: shared T-VOL/M-VOL
- Figure 14 SIz, URz, and TCz: Shared S-VOL / S-VOL / M-VOL
- Figure 15 SIz, TCz, and URz: Shared S-VOL / R-VOL / P-VOL
- Combining ShadowImage for z/OS (SIz) with Universal Replicator for z/OS (URz)
- Combining ShadowImage and TrueCopy Operations
- ShadowImage Main Window
- Performing ShadowImage Operations
- Setting the Reserve Attribute
- Resetting the Reserve Attribute
- Adding ShadowImage Pairs
- Splitting ShadowImage Pairs
- Resynchronizing ShadowImage Pairs
- Suspending ShadowImage Pairs
- Deleting ShadowImage Pairs
- Viewing the Past Record of Pair Operations
- Setting ShadowImage Options
- CTG Window
- FlashCopy(R) Mirror V2 Operations Panel
- Changing SCP Delay Time
- Using PPRC Commands for ShadowImage
- PPRC Command Support
- PSF and DEVSERV Commands
- Adding Pairs: CESTPAIR and PPRCOPY ESTPAIR
- Displaying Pair Status: CQUERY, PPRCOPY QUERY, DEVSERV
- Splitting Pairs: CSUSPEND and PPRCOPY SUSPEND
- Resynchronizing Pairs: MODE(RESYNC) Parameter
- Deleting Pairs: CDELPAIR and PPRCOPY DELPAIR
- Setting and Resetting the At-Time Split Time: ATSPLIT
- Displaying the Status of the Consistency Group: ATQUERY
- Using ShadowImage - FlashCopy
- Overview of ShadowImage - FlashCopy
- ShadowImage - FlashCopy Pair Status
- Establishing ShadowImage - FlashCopy Pairs
- Combining ShadowImage - FlashCopy With Other Copy Solutions
- Table 37 ShadowImage - FlashCopy and TC390 shared volume
- Figure 42 ShadowImage - FlashCopy and TCz: shared T-VOL and M-VOL/R-VOL (not allowed)
- Table 38 ShadowImage - FlashCopy and XRC shared volume
- Figure 43 FlashCopy® Mirror and URz: Shared T-VOL and P-VOL / S-VOL (Not Allowed)
- Table 39 ShadowImage - FlashCopy and URz shared volume
- Using ShadowImage - FlashCopy Host Commands
- Cautions on Switching Off the Power Supply When Using ShadowImage - FlashCopy
- Troubleshooting
- Using Compatible Mirroring for IBM FlashCopy Version2
- Overview of Compatible Mirroring for IBM FlashCopy Version2
- Functionalities of Compatible Mirroring for IBM FlashCopy Version2
- Establishing Multiple Relationships
- Specifying COPY mode or NOCOPY mode
- Volume Copying and Dataset Copying
- Relationship Expansion
- Copying Data by Using Consistency Group
- Incremental FlashCopy Function
- Reverse Restore Function
- Maximum Number of FlashCopy Mirror Version 2 Pairs
- Table 47 Number of Relations That Can Be Established With Volumes of Each Emulation Type and Capacity
- Figure 55 Copying Data in Two Extents that do not Overlap (One T-VOL)
- Figure 56 Copying Data in Two Extents that do not Overlap (Two T-VOLs)
- Figure 57 Copying Data in Two Extents that do not Overlap (Two S-VOLs)
- Figure 58 Copying Data in Three Extents that Overlap (One T-VOL)
- Figure 59 Copying Data in Two Extents that Overlap (Two T-VOLs)
- Figure 60 Copying One Extent to Another in the Same Volume
- Table 48 Referential Examples for Calculating the Number of Resources Required for FlashCopy Mirror Pairs
- Figure 61 Referential Example for Calculating the Number of Pairs
- Installing and Uninstalling Compatible Mirroring for IBM FlashCopy Version2
- Establishing Compatible Mirroring for IBM FlashCopy Version 2 Pairs
- Combining Compatible Mirroring for IBM FlashCopy Version 2 With Other Copy Solutions
- Combining Compatible Mirroring for IBM® FlashCopy® Version 2 With ShadowImage for z/OS®
- Figure 62 Pair Configuration Where an S-VOL of FlashCopy Mirror Version 2 and SIz is Shared
- Table 50 Relationship Between FlashCopy Mirror Version 2 Pair and Operation of the Copy Solutions
- Table 51 Relationship Between SIz Pair Status and FlashCopy Mirror Version 2 Operations
- Figure 63 Cases When FlashCopy Mirror Version 2 and SIz Cannot be Used in Conjunction
- Combining Compatible Mirroring for IBM® FlashCopy® Version 2 With TrueCopy for z/OS®
- Volumes that can be shared
- Volumes that cannot be shared
- Figure 64 FlashCopy® Mirror Version 2 and TCz: Non-sharable combination
- Table 53 Volume Share of FlashCopy® Mirror Version 2 S-VOL and TCz
- Table 54 Whether Reverse Restore Can be Performed When FlashCopy® Mirror Version 2 S-VOL is Used as TCz Volume
- Table 55 Whether FlashCopy® Mirror Version 2 T-VOL Can be Used as TrueCopy for z/OS
- Table 56 Whether Reverse Restore Can be Performed When FlashCopy® Mirror Version 2 T-VOL is Used as TCz Volume
- Using a DFSMS command
- Using FlashCopy® Mirror Version 2 T-VOL and TrueCopy for z/OS M-VOL when shared
- Using a TSO command
- Using a ICKDSF command
- 7.4.1.3 Combining Compatible Mirroring for IBM® FlashCopy® Version 2 With Universal Replicator for z/OS®
- Combining Compatible Mirroring for IBM® FlashCopy® Version 2 With XRC Replication
- Combining Compatible Mirroring for IBM® FlashCopy® Version 2 With CC
- Combining Compatible Mirroring for IBM FlashCopy Version 2 With Other Solutions
- Using Compatible Mirroring for IBM FlashCopy Version 2 Host Commands
- DFSM Command Supported by Compatible Mirroring for IBM FlashCopy Version 2
- TSO Command Supported by Compatible Mirroring for IBM FlashCopy Version 2
- Creating FlashCopy Mirror Version 2 Pairs: FCESTABL
- Suspend the Write Operation to S-VOLs
- Withdrawing FlashCopy Mirror Version 2 Pairs: FCWITHDR
- Table 67 Parameters of FCWITHDR Command and Applicable Combinations
- Figure 77 Example of FCWITHDR Command Description (for Case 1)
- Figure 78 Example of FCWITHDR Command (TDEVN: specified, DDSW = NO)
- Figure 79 Example(1) of FCWITHDR Command Description (for Case 2)
- Figure 80 Ex.(1) of FCWITHDR Command (TDEVN: spec., DDSW = NO, XTNTLST parameter spec.)
- Figure 81 Example(2) of FCWITHDR Command Description (for Case 2)
- Figure 82 Ex.(2) of FCWITHDR Command (TDEVN: spec., DDSW = NO, XTNTLST parameter spec.)
- Figure 83 Example of FCWITHDR Command Description (for Case 3)
- Figure 84 Example of FCWITHDR Command (TDEVN: specified, DDSW = NO)
- Figure 85 Example(1) of FCWITHDR Command Description (for Case 4)
- Figure 86 Ex.(1) of FCWITHDR Comm. (SDEVN and TDEVN: spec., DDSW = NO, XTNTLST param. spec.)
- Figure 87 Example(2) of FCWITHDR Command Description (for Case 4)
- Figure 88 Ex.(2) of FCWITHDR Command (TDEVN: specified, DDSW = NO, XTNTLST parameter specified)
- Figure 89 Example(3) of FCWITHDR Command Description (for Case 4)
- Figure 90 Example of FCWITHDR Command Description (for Case 5)
- Figure 91 Example of FCWITHDR command (SDEVN and TDEVN: specified, DDSW = YES)
- Figure 92 Example of FCWITHDR Command Description (for Case 6)
- Figure 93 Ex. of FCWITHDR Comm. (SDEVN and TDEVN: specified., DDSW = YES, XTNTLST param. specified)
- Figure 94 Example of FCWITHDR Command Description (for Case 7)
- Displaying Information on FlashCopy Mirror Version 2 Pairs: FCQUERY
- ICKDSF Command Supported by Compatible Mirroring for IBM® FlashCopy® Version 2
- Creating FlashCopy® Mirror Version 2 Pairs: FLASHCPY ESTABLISH
- Creating FlashCopy® Mirror Version 2 Pairs by Using Incremental FlashCopy (Restore): FLASHCPY ESTABLISH
- Withdrawing FlashCopy® Mirror Version 2 Pairs: FLASHCPY WITHDRAW
- Displaying Information on FlashCopy Mirror Version 2 Pairs: FLASHCPY QUERY
- Displaying Information on FlashCopy Mirror Version 2 Pairs: FLASHCPY QUERY RELATIONS
- Figure 103 Example of the FLASHCPY QUERY RELATIONS Command Execution
- Figure 104 Example of the FLASHCPY QUERY RELATIONS Command Execution Result
- Table 74 Information Displayed By the FLASHCPY QUERY RELATIONS Command
- ANTRQST Macro Commands Supported by Compatible Mirroring for IBM® FlashCopy® Version 2
- Suspending FlashCopy Mirror Version 2 Pairs
- Relationship Btw. Comp. Mirror. for IBM FlashCpy. and Comp. Mirror. for IBM FlashCpy. Ver. 2
- Differences Between IBM FlashCopy and Compatible Mirroring for IBM FlashCopy Version 2
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 56 |
| Size: | 1.37 MB |
Show table of contents
Read manual
Document Outline
- XP24000/XP20000 Performance Control User Guide
- Contents
- 1 Overview of HP StorageWorks XP Performance Control Software
- 2 About XP Performance Control
- 3 Preparing for XP Performance Control Operations
- 4 Performance Control Window
- 5 XP Performance Control Operations
- Overview of XP Performance Control Operations
- Starting XP Performance Control
- Port Tab Operations
- WWN Tab Operations
- 6 Troubleshooting
- 7 Support and Other Resources
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 219 |
| Size: | 6.16 MB |
Show table of contents
Read manual
Document Outline
- Hitachi Universal Replicator for z/OS user guide for XP12000/XP10000 Disk Arrays and SVS 200
- About this Guide.
- 1 Overview of Universal Replicator for z
- 2 Overview of Universal Replicator Opera
- Functionality Overview
- Journal Copy
- Journal Restore
- URz Components
- XP Storage Systems
- Main and Remote Control Units
- Journal Group
- Data Volume Pair
- Journal Volume
- Remote Copy Connections
- Initiator Ports and RCU Target Ports
- URzRemoteConsole Software
- Host I/O Time-Stamping Function
- Error Reporting Communications (ERC)
- Remote Copy Operations
- Initial Copy Operations
- Update Copy Operation
- Journal Group Operations
- Read and Write I/O Operations
- Logical DKC (LDKC)
- Initiator Ports and RCU Target Ports
- Remote Copy Operations
- Initial Copy Operations
- Update Copy Operation
- Read and Write I/O Operations
- Journal Processing
- Creating and Storing Journals at the Primary Storage System
- Copying Journals to the Secondary Storage System
- Storing Journalatthe SecondaryStorage System
- Selecting and Restoring Journal at the Secondary Subsystem
- JournalGroup Operations
- Timer Type Option
- Journal Group Operations
- URz Delta Resync Operation
- URz Pair Status
- Business Continuity Manager Support
- Command Device
- 3PreparingforUniversalReplicator z/OS Operations
- System Requirements
- Requirements and Restrictions for URz
- Duplicate VOLSER (Volume Serial Number)
- Journal Group
- Accessing URz Primary Data Volume and Secondary Data Volume
- Installing the Hardware
- Enabling the URz Option(s)
- Planning of Journal Volumes
- Contributing Factors for Data Transfer Speed between Storage Systems
- Configuring the Primary and Secondary Storage Systems
- Using More Than One Primary and Secondary Storage System for Remote Console
- Basic Behavior
- Hardware Configuration (When More Than One Primary and Secondary Storage Systems are Used)
- Setup Procedure (When More Than One Primary and Secondary Subsystem are Used)
- Connections Among Secondary Storage Systems
- Disaster Recoveryfor Multiple Primaryand SecondaryStorage Systems
- Combining URz with Other Data Management Operations
- Combining URz with Virtual LVI
- Combining URz with Cache Residency Manager
- Combining URz and ShadowImage for z/OS
- Using At-Time Split Function When Combining URz with ShadowImage for z/OS
- Combining URz with TCz Synchronous (3DC Cascading Configuration)
- Combining URz with TCz Synchronous (3DC Multi-target Configuration)
- Changing to 3DC Multi-target Configuration after Recovering from Primary Site Failures
- Transferring Business Tasks from TCz Secondary Site to the Primary Site (in 3DC Cascading Configuration)
- Transferring Business Tasks from TCz Secondary Site to the Primary Site (in 3DC Multi-target Configuration)
- Transferring Business Tasks from TCz Secondary Site to the Primary Site (When Delta Resync Operation is Performed in 3DC multi-target configuration)
- Recovering from Failures in the Primary Site and the TCz Synchronous Secondary Site
- Transferring Business Tasks from the URz Secondary Site to the Primary Site
- 4Configuring Disk Storage Systems and Logical Paths
- DKC Operation Window
- Configuring Port Attributes
- Associating the Primary and the Remote Storage Systems and Configuring Logical Paths (Add DKC)
- Changing Options for Logical Paths and Storage Systems
- Adding Logical Paths
- Deleting Logical Paths
- Viewing the Status of Logical Paths
- Removing the Relationship Between the Primary and the SecondaryStorage Systems
- 5 Using Journal Groups
- Displaying the Journal Operation Window
- Registering Journal Volumes in a Journal Group
- Deleting Journal Volumes from a Journal Group
- Displaying Detailed Information about a Journal Group
- Changing Options for a Journal Group
- Deleting a Journal Group
- Splitting a Mirror (Suspending a copy operation)
- Restoring a Mirror (Resuming a copy operation)
- Deleting Data Volumes from a Mirror (Ending a copy operation)
- Forcibly Removing Journal Groups from an Extended Consistency Group
- 6 Performing URz Pair Operations
- Displaying the Pair Operation Window
- Creating a Pair of Data Volumes
- Displaying Detailed Information about a Pair of Data Volumes
- Changing Options for a Data Volume Pair
- Splitting a Pair of Data Volumes
- Restoring a Pair of Data Volumes
- Deleting a Pair of Data Volumes
- Creating a Point-in-Time Copy of Data Volumes
- 7 Monitoring Remote Copy Operations
- 8 Viewing History of Data Volume Pair Operations
- 9 Performing Optional Operations
- 10 Using Extended Consistency Groups
- 11 Disaster Recovery Operations
- 12 Troubleshooting
- 13 Power Management for Disk Storage Systems and Network Relay Devices
- 14 Pinned Track Recovery for URz Volumes
- 15 SIM Reporting
- 16 Acronyms and Abbreviations
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 215 |
| Size: | 1.87 MB |
Show table of contents
Read manual
Document Outline
- XP Continuous Access Journal User Guide
- Contents
- 1 Overview of HP Copy Solutions
- 2 Overview of XP Continuous Access Journal
- Overview of functionality
- Components
- Remote copy operations
- Journal processing
- Journal group operations
- XP Continuous Access Journal delta resync operations
- XP Continuous Access Journal data volume pair status
- 3 XP Continuous Access Journal operations requirements and restrictions
- System requirements
- Requirements and restrictions for XP Continuous Access Journal
- Installing hardware
- Enabling XP Continuous Access Journal options
- Planning for journal volumes
- Configuring primary and secondary arrays for XP Continuous Access Journal operations
- Combining XP Continuous Access Journal with other data management functions
- Combining XP Continuous Access Journal with LUSE
- Combining XP Continuous Access Journal with Virtual LUN
- Combining XP Continuous Access Journal with XP Cache LUN
- Combining XP Continuous Access Journal with LUN Manager
- Combining XP Continuous Access Journal and XP Performance Control
- Combining XP Continuous Access Journal and XP Business Copy
- Combining XP Continuous Access Journal with XP Continuous Access (3DC cascading configuration)
- Combining XP Continuous Access Journal with XP Continuous Access Synchronous (3DC multi-target configuration)
- Hardware configurations
- Setup procedure
- Requirements for creating XP Continuous Access Journal pairs for delta resync operations
- Requirements for performing delta resync operations
- Recovering from primary site failures (prior to 50-08-xx firmware)
- Recovering from primary site failures via delta resync (50-08-xx or greater FW) (prior to 50-08-xx FW)
- Change to 3DC multi-target configuration after primary site failure
- Transfer tasks from XP Continuous Access secondary sites to primary sites (3DC cascade)
- Transfer tasks from XP Continuous Access secondary sites to primary sites (3DC multi-target)
- Transfer tasks-DC1 without jrnl pr to DC1 with jrnl pr (delta resync/3DC multi-target)
- Recovering from primary site and XP Continuous Access Synchronous secondary site failures
- Transferring business tasks from XP Continuous Access Journal secondary sites to primary sites
- Combining XP Continuous Access Journal and XP LUN Security Extension
- 4 Configuring arrays and logical paths
- Displaying the DKC Operation pane
- Configuring port attributes
- Associating primary and remote arrays and configuring logical paths (Add DKC)
- Changing options for logical paths and arrays
- Adding logical paths
- Deleting logical paths
- Viewing the status of logical paths
- Removing the relationship between primary and secondary arrays
- 5 Using journal groups
- Displaying the Journal Operation pane
- Registering journal volumes in journal groups
- Deleting journal volumes from journal groups
- Displaying detailed information about journal groups
- Changing options for journal groups
- Deleting journal groups
- Splitting mirrors (Pairsplit-r: suspending copy operations)
- Restoring mirrors (Pairresync: resuming copy operations)
- Deleting data volumes from mirrors (Pairsplit-S: ending copy operations)
- 6 Performing XP Continuous Access Journal pair operations
- Displaying the Pair Operation pane
- Creating a pair of data volumes (Paircreate)
- Displaying detailed information about a pair of data volumes
- Changing options for data volume pairs
- Splitting a pair of data volumes
- Restoring a pair of data volumes
- Deleting a pair of data volumes
- Creating a Point-in-Time copy of data volumes
- 7 Monitoring remote copy operations
- 8 Viewing history of data volume pair operations
- 9 Performing optional operations
- 10 Disaster recovery operations
- 11 XP Continuous Access Journal operations with NAS Blade
- Overview of XP Continuous Access Journal operations in NAS Blade systems
- Scope of XP Continuous Access Journal functions with NAS Blade
- Prerequisites
- Notes on operations
- Preparing for XP Continuous Access Journal operations
- Preparing for XP Continuous Access Journal volume pair operations
- Registration of public key used for SSH
- Configuring the XP RAID Manager environment
- Log in to the target NAS package using SSH
- Configure XP RAID Manager configuration definition files
- Adding the HORCM_DEV and HORCM_INST sections using the mkconf.sh command in XP RAID Manager
- Creating a template for an XP RAID Manager configuration definition file
- Editing the template for the XP RAID Manager configuration definition file
- Checking the contents of the XP RAID Manager configuration definition file
- Cascade configuration of XP Continuous Access Journal and XP Business Copy
- Setting the XP RAID Manager user environmental variable
- Settings for disaster recovery
- Create file systems in XP Continuous Access Journal P-VOLs
- Overview of XP Continuous Access Journal operations
- Operations of XP RAID Manager log files
- Commands
- Messages
- Notes on failures of external volumes
- 12 Troubleshooting
- 13 Power management for arrays and network relay devices
- 14 Pinned track recovery for XP Continuous Access Journal volumes
- 15 SIM reporting
- 16 Support and other resources
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 178 |
| Size: | 5.64 MB |
Show table of contents
Read manual
Document Outline
- HP StorageWorks XP Remote Web Console user guide for XP12000/XP10000 Disk Arrays and SVS 200
- About this guide.
- 1 Overview of XP Remote Web Console Oper
- 2 Installation Requirements and Procedur
- System Requirements
- Setting up the XP Remote Web Console
- Configuring Your Web Browser
- Configuring XP Remote WebConsole over aFi
- Configuring the Java™ Plug-In
- For JRE 1.4
- For JRE 5.0 and JRE 6.0
- Using the XP Remote Web Console
- XP Remote Web Console Conventions
- Keystroke and Navigation Conventions for
- Conventions for Using the XP Remote Web
- NotesonUsing theXPRemoteWeb ConsoleonWin
- Starting Up and Logging on to the XP Rem
- RestrictiononAccessingLocal Client Files
- For JRE 1.4
- For JRE 5.0
- LoggingontoanArray
- View Mode and Modify Mode
- Changing Between View Mode and Modify Mo
- Extending the Modify Mode Timeout Period
- License Keys
- Enabling and Disabling Options on the XP
- XP Remote Web Console Options
- License Key Pane
- Enabling XP Remote Web Console Options U
- Enabling XP Remote Web Console Options U
- Enabling Available XP Remote Web Console
- DisablingXPRemoteWeb ConsoleOptions
- Allocating Licensed Capacity among Stora
- Overview of Storage Logical Partitions
- License Key Partition Definition Pane
- Partitioning Licensed Capacity and Alloc
- 3 Performing XP Remote Web Console Opera
- Product Option Icons (Common to All XP R
- Launching the Desired Option
- Remote Web Console Features
- Viewing Detailed Information of the Arra
- Capacity Box (Open Systems)
- Number of LDEVs Box
- System Tab on the XP Remote Web Console
- Base Information
- XP Remote Web Console Main Pane, Status
- Detail Pane
- Setting User Accounts (Account Pane)
- Registering New User Accounts
- Changing the Password of User Accounts
- Changing Operation Authority of User Acc
- Deleting User Account
- Basic Information Display Pane
- Basic Information Display Pane, Port Pan
- Basic Information Display Pane, LUN Tab
- Basic Information Display Pane , LDEV Ta
- Displaying the Detailed Information on L
- Downloading the Audit Log File
- Checking the Audit Log Using the Syslog
- Transferring Audit Log to FTP Server (Au
- Control Panel
- Setting the XP Remote Web Console Enviro
- Downloading theConfiguration Files (Downl
- Restoring Backups of Configuration Files
- Extending Cache Memory and LUs Using the
- On-Demand Pane
- ExtendingLUs Usingthe On-DemandStorage L
- Extending Cache Memory Using On-Demand S
- Allocating Extended Cache Memory to CLPR
- Downloading Trace Files Using the FD Dum
- 4 Setting SNMP Agent Properties.
- 5 SSL Encrypted Communication
- 6 Configuration File Loader
- Overview of Configuration File Loader
- General Spreadsheet Conventions
- Spreadsheet File Requirements
- Spreadsheet Components
- Spreadsheet Declaration
- Function Tags
- Configuration Definitions
- Comments
- New Settings CanAffectOther Settings
- LUN Manager Spreadsheet Settings
- Column Format
- Setting the CHA Mode
- Port Settings
- Setting the Host Group
- Setting theWWN Information
- Setting the LU Path
- Configuring the Command Devices
- Configuration File Loader Operations
- Configuration File Loader Pane
- Using Configuration File Loader
- Exporting a Spreadsheet
- Editing the Spreadsheet
- Importing the Spreadsheet
- First Error Check
- Second Error Check
- Third Error Check
- 7 Troubleshooting
- Acronyms and Abbreviations.
- Index.
| Recognized languages: | English |
|---|---|
| Pages: | 20 |
| Size: | 356 KB |
Show table of contents
Read manual
Document Outline
- HP StorageWorks Cache LUN XP user guide for the XP1024/XP128
- Contents
- About this guide
- 1 Cache LUN XP for the XP1024/XP128
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 108 |
| Size: | 6.27 MB |
Show table of contents
Read manual
Document Outline
- HP StorageWorks XP24000/XP20000 Remote Web Console User's Guide
| Recognized languages: | English |
|---|---|
| Pages: | 172 |
| Size: | 2.75 MB |
Show table of contents
Read manual
Document Outline
- XP24000/XP20000 Performance Monitor User Guide
- Contents
- 1 Overview of Performance Monitor
- 2 About Performance Monitor
- Components
- Overview of Performance Monitor
- Understanding Statistical Storage Ranges
- Parity Group Usage Statistics
- Volume Usage Statistics
- External Volume Group Usage Statistics
- External Volume Usage Statistics
- Channel Processor Usage Statistics
- Disk Processor Usage Statistics
- DRR Processor Usage Statistics
- Write Pending Rate and Cache Memory Usage Statistics
- Access Path Usage Statistics
- Hard Disk Drive Workload Statistics
- Port Traffic Statistics
- LU Path Traffic Statistics
- Traffic between HBAs and Storage System Ports
- Overview of Export Tool
- Interoperability with Other Products
- 3 Preparing for Performance Monitor Operations
- 4 Using the Performance Monitor Windows
- 5 Performance Monitor Operations
- Overview of Performance Monitor Operations
- Monitoring Resources in the Storage System
- Viewing Usage Statistics about Parity Groups
- Viewing Usage Statistics about Volumes in Parity Groups
- Viewing Usage Statistics about External Volume Groups
- Viewing Usage Statistics about External Volumes in External Volume Groups
- Viewing Usage Statistics about Channel Processors (CHPs)
- Viewing Usage Statistics about Disk Processors (DKPs)
- Viewing Usage Statistics about Data Recovery and Reconstruction Processors (DRRs)
- Viewing Write Pending and Cache Memory Usage Statistics
- Viewing Usage Statistics about Access Paths
- Monitoring Hard Disk Drives
- Monitoring Ports
- Monitoring LU Paths
- Viewing HBA Information
- 6 Using the Export Tool
- Files to be Exported
- Preparing for Using the Export Tool
- Using the Export Tool
- Command Reference
- Causes of Invalid Monitoring Data
- 7 Troubleshooting
- 8 Support and Other Resources
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 54 |
| Size: | 1004 KB |
Show table of contents
Read manual
Document Outline
- HP StorageWorks Flex Copy XP user guide
- Contents
- About this guide
- 1 Flex Copy XP overview
- 2 Preparing for Flex Copy XP operations
- 3 Requirements and overview of copy operations
- Requirements for volumes that can be used as copy pairs
- Overview of copy operations
- General cautions and notes about Flex Copy XP operations
- Cautions about Flex Copy XP copy pair volumes
- Copy pair status
- Copy operations from Flex Copy XP (Command View XP or XP Remote Web Console)
- Copy operations from RAID Manager XP
- 4 Flex Copy XP copy operations
- 5 Troubleshooting
- A Adjusting volume capacity for copy pair settings
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 18 |
| Size: | 312 KB |
Show table of contents
Read manual
Document Outline
- Contents
- 1 XP Data Shredder for the XP128/XP1024/XP10000/XP12000
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 58 |
| Size: | 473 KB |
Show table of contents
Read manual
Document Outline
- XP24000/XP20000 Performance Control User's Guide
- Table of Contents
- 1 Overview of HP StorageWorks XP Performance Control
- 2 About XP Performance Control
- 3 Preparing for XP Performance Control Operations
- 4 Performance Control Windows
- 5 XP Performance Control Operations
- Overview of XP Performance Control Operations
- Starting XP Performance Control
- Port Tab Operations
- WWN Tab Operations
- 6 Troubleshooting
- 7 Support and Other Resources
- A Acronyms and Abbreviations
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 248 |
| Size: | 4.10 MB |
Show table of contents
Read manual
Document Outline
- XP24000/XP20000 Continuous Access Journal Software User Guide
- Contents
- 1 Overview of HP StorageWorks XP Continuous Access Journal Software
- 2 About XP Continuous Access Journal Operations
- Functionality Overview
- XP Continuous Access Journal Components
- Storage Systems
- XP Continuous Access Journal Software
- Logical Disk Controllers
- Main and Remote Control Units (Primary Storage Systems and Secondary Storage Systems)
- Consistency Groups
- Remote Copy Connections
- Initiator Ports and RCU Target Ports
- Journal Groups
- Data Volume Pairs
- Journal Volumes
- Host Failover Software
- XP Continuous Access Journal Remote Copy Operations
- Journal Processing
- XP Continuous Access Journal Delta Resync Operation
- Journal Obtain at XP Continuous Access Synchronous Secondary Site
- Switching the Master Journal Group of XP Continuous Access Journal
- Pair Status
- 3 Preparing for XP Continuous Access Journal Operations
- Requirements and Restrictions
- Installing the Hardware
- Configuring the Primary and Secondary Storage Systems for XP Continuous Access Journal Operations
- Using Multiple Primary and Secondary Storage Systems
- 3DC Multi-target Configuration of Three XP Continuous Access Journal Sites
- 3DC Cascading Configuration of Three XP Continuous Access Journal Sites
- Enabling the XP Continuous Access Journal Option
- Interoperability with Other Products and Functions
- LUSE
- Virtual LUN
- Cache Residency Manager
- LUN Manager
- XP Thin Provisioning
- XP Performance Control
- XP Business Copy
- XP Continuous Access Synchronous (3DC Cascading Configuration)
- XP Continuous Access Synchronous (3DC Multi-Target Configuration)
- Hardware Configuration
- Setup Procedure
- Requirements for Creating an XP Continuous Access Journal Pair for the Delta Resync Operation
- Requirements for Performing the Delta Resync Operation
- Configuring Delta Resync Operation Environment that uses Remote Command Devices
- Changing to a 3DC Multi-Target Configuration After Recovering from Primary Site Failures
- Transferring Business Tasks from an XP Continuous Access Secondary Site to the Primary Site (in a 3DC Cascading Configuration)
- Transferring Business Tasks from the XP Continuous Access Secondary Site to the Primary Site (in a 3DC Multi-target Configuration)
- Transferring Business Tasks from XP Continuous Access Secondary Site to Primary Site (When Delta Resync Operation is Performed in 3DC Multi-target Configuration)
- Recovering from Failures at the Primary Site and the XP Continuous Access Synchronous Secondary Site
- Transferring Business Tasks from the XP Continuous Access Journal Secondary Site to the Primary Site
- XP Continuous Access Synchronous (2DC Configuration)
- Basic Behavior
- Hardware Configuration
- Setup Procedure
- Restrictions About 2DC
- Changing to 2DC Configuration after Recovering from Primary Site Failures
- Data Retention Utility
- Performance Monitor
- XP Auto LUN Software
- Planning of Journal Volumes
- Factors That Determine Data Transfer Speed Between the Primary and Secondary Storage System
- Performing Remote Copy Between an XP12000/XP10000 Disk Array and an XP24000/XP20000 Disk Array
- 4 Using the XP Continuous Access Journal GUI
- 5 Configuring Storage Systems and Logical Paths
- Reviewing System Configuration Tasks
- Configuring Port Attributes
- Configuring Storage System Options
- Establishing the Relationship Between Primary and Secondary Storage Systems (Add DKC)
- Changing Options for Logical Paths and Storage Systems
- Adding Logical Paths
- Viewing the Status of Logical Paths
- Deleting Logical Paths
- Managing Power for Storage Systems and Network Relay Devices
- Removing the Relationship Between Primary and Secondary Storage Systems
- 6 Using Journal Groups
- Reviewing Administrator Tasks for Managing Journals
- Registering Journal Volumes in a Journal Group
- Deleting Journal Volumes from a Journal Group
- Displaying Detailed Information about a Journal Group
- Changing Options for a Journal Group
- Deleting a Journal Group
- Splitting a Mirror (Pairsplit-r: Suspending a Copy Operation)
- Restoring a Mirror (Pairresync: Resuming a Copy Operation)
- Deleting Data Volumes from a Mirror (Pairsplit-S: Ending a Copy Operation)
- Assigning Remote Command Devices to Mirrors
- Releasing Assigned Remote Command Device
- 7 Performing XP Continuous Access Journal Pair Operations
- Reviewing the Pair Operation Window
- Creating a Pair of Data Volumes (Paircreate)
- Displaying Detailed Information about a Pair of Data Volumes
- Changing Options for a Data Volume Pair
- Splitting a Pair of Data Volumes (Pairsplit-r)
- Restoring a Pair of Data Volumes (Pairresync)
- Releasing a Pair of Data Volumes (Pairsplit-S)
- Creating a Point-in-Time Copy of Data Volumes
- Recovering a Pinned Track
- 8 Usage Monitor Operations
- 9 Performing Disaster Recovery Operations
- Preparing for Disaster Recovery
- Recovering from Primary Site Failures in XP Continuous Access Journal 3DC Multi-Target Configuration (When Delta Resync Operation is Performed)
- Recovering from Primary Site Failures in XP Continuous Access Journal 3DC Cascading configuration
- Recovering from a Failure in the Intermediate Site in a 3DC Cascading Configuration
- Recovering from a Failure by Duplicating Volumes in a 3DC Cascading Configuration
- Recovering from a Disaster in a 3DC Cascading Configurationof XP Continuous Access Journal and XP Continuous Access Synchronous
- Recovering from Primary Site Disaster in a 3DC Multi-Target Configuration
- Recovering from Primary Site Failures in 3DC Multi Target Configuration of XP Continuous Access Journal and XP Continuous Access Synchronous (When Delta Resync Operation Is Performed)
- Recovering from a Disaster in a 2DC Configuration of XP Continuous Access Journal and XP Continuous Access Synchronous
- Recovering the Primary Site from a Failure When the System Consists of Multiple Primary and Secondary Storage Systems
- 10 Troubleshooting
- 11 Support and Other Resources
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 138 |
| Size: | 4.92 MB |
Show table of contents
Read manual
Document Outline
- HP StorageWorks XP24000 External Storage Software User’s Guide
- About this Guide
- 1 Overview of HP StorageWorks XP External Storage Software
- 2 About External Storage Operations
- Connecting External Storage System
- External Storage Components
- External Storage Operations
- Configuring External Storage
- Choosing Mapping Policy
- Using a Mapped External Volume from a Connected Host
- Interoperability with other Products and Functions
- Examples of Using External Volumes with Other Products
- 3 Preparing for External Storage Operations
- 4 Using the External Storage GUI
- 5 Performing External Storage Operations
- Overview of Setting Operations
- Setting Port of External Storage System
- Setting Port Attribute for Local Storage System
- Mapping an External Volume Automatically
- Mapping an External Volume Manually
- Setting the Cross-subsystem Paths
- Checking the External Volume Details
- Turning On or Off the Storage System
- Disconnecting External Storage System or Disconneccting External Volume
- Checking Connection Status and Resuming External Volume Operation
- Stopping the Use of Paths to the External Volume (Disconnect Paths)
- Restoring the Paths to the External Volume (Check Paths)
- Changing the Cache Mode Setting of the External Volume
- Changing the Inflow Control Setting of the External Volume
- Changing the Port Setting of the External Storage System
- Editing Mapping Policy
- Deleting the External Volume Mapping
- 6 Remote Command Devices
- 7 Troubleshooting
- A Connecting External Storage Systems
- TagmaStore AMS Storage System, TagmaStore WMS Storage System
- Thunder 9500V Storage System
- USP V Storage System
- TagmaStore USP Storage System, TagmaStore NSC Storage System
- Lightning 9900V Storage System
- Lightning 9900 Storage System
- SVS200 Storage System
- EVA Storage System
- System Parameter Settings for Connecting Sun StorEdge 6120/6320
- System Parameter Settings for Connecting StorageTek FlexLine 380
- System Parameter Settings for Connecting CLARiiON CX600
- Non-HP Storage Systems
- B Required Volume Capacity for Each Emulation Type
- C Adjusting Volume Capacities for Pairs
- D Acronyms and Abbreviations
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 48 |
| Size: | 1.11 MB |
Show table of contents
Read manual
Document Outline
- XP24000/XP20000 for Compatible Extended Remote Copy (XRC) Software User's Guide
- Table of Contents
- About this Guide
- 1 Overview of Compatible XRC
- 2 About Compatible XRC Operations
- 3 Preparing for Compatible XRC Operations
- 4 Performing Compatible XRC Operations
- 5 Troubleshooting
- A Acronyms and Abbreviations
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 115 |
| Size: | 1.01 MB |
Show table of contents
Read manual
Document Outline
- XP Continuous Access User Guide
- Contents
- 1 XP Continuous Access features
- 2 Overview of XP Continuous Access operations
- Components
- Disk arrays
- Main and remote control units (MCUs and RCUs)
- Volume pairs (P-VOLs and S-VOLs)
- XP Continuous Access Synchronous consistency groups
- XP Continuous Access Asynchronous consistency groups
- Remote copy connections
- Initiator ports and RCU target ports
- XP Remote Web Console
- Host failover software
- Remote copy operations
- XP Continuous Access Asynchronous recordset operations
- XP Continuous Access Synchronous consistency group operations
- XP Continuous Access Asynchronous consistency group operations
- XP Continuous Access volume pair status
- Components
- 3 Preparing for XP Continuous Access operations
- System requirements
- Requirements and restrictions
- Installing hardware
- Configuring MCUs and RCUs for XP Continuous Access operations
- Combining XP Continuous Access with other data management operations
- Combining XP Continuous Access and XP Business Copy
- Combining XP Continuous Access and LUN Security XP Extension
- Copying access attributes
- License capacity for LUN Security XP Extension
- Combining XP Continuous Access and Volume Manager
- Combining XP Continuous Access and Custom Volume Size (CVS)
- Combining XP Continuous Access and Cache LUN XP
- Combining XP Continuous Access and LUN Manager
- Combining XP Continuous Access and Auto LUN XP
- Combining XP Continuous Access and XP Performance Control
- 4 Starting XP Continuous Access
- 5 Performing XP Continuous Access configuration operations
- MCU operations
- RCU operations
- Viewing RCU Status (RCU Status)
- Registering RCUs (Add RCU)
- Modifying RCU options (Change RCU Option)
- Deleting RCUs (Delete RCU)
- RCU path parameters
- Adding and deleting logical paths for RCUs (Add Path/Delete Path)
- Adding and deleting SSIDs for RCUs (Add SSID/Delete SSID)
- Port change operation
- Modifying parameters and deleting settings
- XP Continuous Access Asynchronous operations
- Usage Monitor operations
- Optimizing XP Continuous Access operations and disk array performance
- Discontinuing XP Continuous Access operations
- Performing XP Continuous Access pair operations
- Common procedure for XP Continuous Access pair operations
- Viewing XP Continuous Access pair status for LUs and LDEVs (Pairdisplay)
- Creating XP Continuous Access volume pairs (Paircreate)
- Splitting XP Continuous Access pairs (Pairsplit-r)
- Resuming XP Continuous Access volume pairs (Pairresync)
- 6 Support and other resources
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 40 |
| Size: | 299 KB |
Show table of contents
Read manual
| Recognized languages: | English |
|---|---|
| Pages: | 117 |
| Size: | 1005 KB |
Show table of contents
Read manual
Document Outline
- Hitachi ShadowImage™ for Mainframe User's Guide
- Contents
- 1 Overview of Hitachi ShadowImage™ for Mainframe
- 2 About ShadowImage for Mainframe Operations
- 3 Interoperability with other Products and Functions
- Virtual LVI
- Cache Residency Manager
- Volume Security
- Volume Retention Manager
- XP Auto LUN
- HP StorageWorks XP External Storage Software
- Hitachi TrueCopy™ for Mainframe
- XP Continuous Access Journal Software™ for Mainframe
- TrueCopy for Mainframe and Universal Replicator for Mainframe
- HP StorageWorks XP for Compatible Extended Remote Copy (XRC) Software
- Concurrent Copy
- 4 Preparing for ShadowImage for Mainframe Operations
- 5 Using the ShadowImage for Mainframe GUI
- 6 Performing ShadowImage for Mainframe Operations Using Remote Web Console
- Configuring the Volume List
- Changing or Deleting the Settings in Preview List
- Setting or Resetting the Reserve Attribute
- Setting Options
- Configuring CTGs
- Adding Pairs
- Splitting Pairs
- Using PPRC Commands to Split, Resynchronize, and Delete Pairs in a CTG
- Suspending Pairs
- Resynchronizing Pairs
- Deleting Pairs
- Viewing Detailed Volume and Pair Information
- Viewing the Number of Pairs and License Information
- Viewing Pair Operations History
- 7 Performing ShadowImage for Mainframe Pair Operations Using XP for Business Continuity Manager Software
- 8 Performing ShadowImage for Mainframe Pair Operations Using PPRC
- 9 Troubleshooting
- 10 Support and Other Resources
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 30 |
| Size: | 403 KB |
Show table of contents
Read manual
Document Outline
- Contents
- Cache LUN XP for the XP10000/XP12000
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 130 |
| Size: | 1.96 MB |
Show table of contents
Read manual
Document Outline
- Contents
- 1 ShadowImage for the XP128/XP1024/XP10000/XP12000
- ShadowImage Components
- ShadowImage Requirements
- ShadowImage Operations
- ShadowImage Options
- At-Time Split Function
- ShadowImage Pair Status
- Cautions on Switching Off the Power Supply
- Cautions on Using the XP10000 Disk Array
- Preparing for ShadowImage Operations
- System Requirements
- Preparing for ShadowImage Operations
- Combining ShadowImage with Other Data Management Operations
- Combining ShadowImage and TrueCopy Operations
- Table 10 Host pair status reporting for SI390/TC390 shared volumes
- Table 11 Currency of a shared SI390 and TC390 volume
- Figure 10 SI390 and TC390: shared S-VOL/M-VOL
- Figure 11 SI390 and TC390: shared S-VOL/R-VOL
- Figure 12 SI390 and TC390: shared S-VOL/M-VOL and S-VOL/R-VOL
- Figure 13 SI390 and TC390: shared T-VOL/M-VOL
- Combining ShadowImage for z/OS (SIz) with Universal Replicator for z/OS (URz)
- Combining ShadowImage and TrueCopy Operations
- Starting ShadowImage
- Performing ShadowImage Operations
- Setting the Reserve Attribute
- Resetting the Reserve Attribute
- Adding ShadowImage Pairs
- Splitting ShadowImage Pairs
- Resynchronizing ShadowImage Pairs
- Suspending ShadowImage Pairs
- Deleting ShadowImage Pairs
- Viewing the Past Record of Pair Operations
- Setting ShadowImage Options
- CTG Window
- Using PPRC Commands for ShadowImage
- PPRC Command Support
- PSF and DEVSERV Commands
- Adding Pairs: CESTPAIR and PPRCOPY ESTPAIR
- Displaying Pair Status: CQUERY, PPRCOPY QUERY, DEVSERV
- Splitting Pairs: CSUSPEND and PPRCOPY SUSPEND
- Resynchronizing Pairs: MODE(RESYNC) Parameter
- Deleting Pairs: CDELPAIR and PPRCOPY DELPAIR
- Setting and Resetting the At-Time Split Time: ATSPLIT
- Displaying the Status of the Consistency Group: ATQUERY
- Using ShadowImage - FlashCopy
- Overview of ShadowImage - FlashCopy
- ShadowImage - FlashCopy Pair Status
- Establishing ShadowImage - FlashCopy Pairs
- Combining ShadowImage - FlashCopy With Other Copy Solutions
- Using ShadowImage - FlashCopy Host Commands
- Cautions on Switching Off the Power Supply When Using ShadowImage - FlashCopy
- Troubleshooting
- Using Compatible Mirroring for IBM FlashCopy Version2
- Overview of Compatible Mirroring for IBM FlashCopy Version2
- Functionalities of Compatible Mirroring for IBM FlashCopy Version2
- Establishing Multiple Relationships
- Specifying COPY mode or NOCOPY mode
- Volume Copying and Dataset Copying
- Maximum Number of FlashCopy Mirror Version 2 Pairs
- Table 47 Number of Relations That Can Be Established With Volumes of Each Emulation Type and Capacity
- Figure 45 Copying Data in Two Extents that do not Overlap (One T-VOL)
- Figure 46 Copying Data in Two Extents that do not Overlap (Two T-VOLs)
- Figure 47 Copying Data in Two Extents that do not Overlap (Two S-VOLs)
- Figure 48 Copying Data in Three Extents that Overlap (One T-VOL)
- Figure 49 Copying Data in Two Extents that Overlap (Two T-VOLs)
- Figure 50 Copying One Extent to Another in the Same Volume
- Table 48 Referential Examples for Calculating the Number of Resources Required to Create the FlashCopy Mirror Version 2 Pairs
- Figure 51 Referential Example for Calculating the Number of Pairs
- Installing and Uninstalling Compatible Mirroring for IBM FlashCopy Version2
- Establishing Compatible Mirroring for IBM FlashCopy Version 2 Pairs
- Combining Compatible Mirroring for IBM FlashCopy Version 2 With Other Copy Solutions
- Table 49 FlashCopy Mirror Version 2 and Other Copy Solutions Shared Volumes
- Figure 52 Pair Configuration Where an S-VOL of FlashCopy Mirror Version 2 and SIz is Shared
- Table 50 Relationship Between FlashCopy Mirror Version 2 Pair and Operation of the Copy Solutions
- Table 51 Relationship Between SIz Pair Status and FlashCopy Mirror Version 2 Operations
- Figure 53 Cases When FlashCopy Mirror Version 2 and SIz Cannot be Used in Conjunction
- Table 52 FlashCopy Mirror Version 2 and TCz, URz, and XRC Shared Volume
- Combining Compatible Mirroring for IBM FlashCopy Version 2 With Other Solutions
- Combining Compatible Mirroring for IBM FlashCopy Version 2 With Other Copy Solutions
- Using Compatible Mirroring for IBM FlashCopy Version 2 Host Commands
- DFSM Command Supported by Compatible Mirroring for IBM FlashCopy Version 2
- TSO Command Supported by Compatible Mirroring for IBM FlashCopy Version 2
- Creating FlashCopy Mirror Version 2 Pairs: FCESTABL
- Withdrawing FlashCopy Mirror Version 2 Pairs: FCWITHDR
- Table 57 Parameters of FCWITHDR Command and Applicable Combinations
- Figure 61 Example of FCWITHDR Command Description (for Case 1)
- Figure 62 Example of FCWITHDR Command (TDEVN: specified, DDSW = NO)
- Figure 63 Example(1) of FCWITHDR Command Description (for Case 2)
- Figure 64 Example(1) of FCWITHDR Command (TDEVN: specified, DDSW = NO, XTNTLST parameter specified)
- Figure 65 Example(2) of FCWITHDR Command Description (for Case 2)
- Figure 66 Example(2) of FCWITHDR Command (TDEVN: specified, DDSW = NO, XTNTLST parameter specified)
- Figure 67 Example of FCWITHDR Command Description (for Case 3)
- Figure 68 Example of FCWITHDR Command (TDEVN: specified, DDSW = NO)
- Figure 69 Example(1) of FCWITHDR Command Description (for Case 4)
- Figure 70 Example(1) of FCWITHDR Command (SDEVN and TDEVN: specified, DDSW = NO, XTNTLST parameter specified)
- Figure 71 Example(2) of FCWITHDR Command Description (for Case 4)
- Figure 72 Example(2) of FCWITHDR Command (TDEVN: specified, DDSW = NO, XTNTLST parameter specified)
- Figure 73 Example(3) of FCWITHDR Command Description (for Case 4)
- Figure 74 Example of FCWITHDR Command Description (for Case 5)
- Figure 75 Example of FCWITHDR command (SDEVN and TDEVN: specified, DDSW = YES)
- Figure 76 Example of FCWITHDR Command Description (for Case 6)
- Figure 77 Example of FCWITHDR Command (SDEVN and TDEVN: specified, DDSW = YES, XTNTLST parameter specified)
- Displaying Information on FlashCopy Mirror Version 2 Pairs: FCQUERY
- Cautions on Switching Off the Power Supply When Using Compatible Mirroring for IBM FlashCopy Version 2
- Suspending FlashCopy Mirror Version 2 Pairs
- Relationship Between Compatible Mirroring for IBM FlashCopy and Compatible Mirroring for IBM FlashCopy Version 2
- Differences Between IBM FlashCopy and Compatible Mirroring for IBM FlashCopy Version 2
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 53 |
| Size: | 1.69 MB |
Show table of contents
Read manual
Document Outline
- HP StorageWorks XP24000 Auto LUN Software User's Guide
| Recognized languages: | English |
|---|---|
| Pages: | 92 |
| Size: | 1.40 MB |
Show table of contents
Read manual
Document Outline
- Contents
- Business Copy XP (BC) for the XP10000/XP12000
- Overview of BC operations
- BC components
- BC requirements for XP12000 and XP10000
- BC operations
- Set reserve attribute operation
- Reset reserve attribute operation
- Paircreate operation
- Initial copy operation
- Update copy operation
- Cascade function
- Pairsplit operation
- Pairresync operations
- Forward pairresync operation
- Backward pairresync operation
- Figure 5 Reverse and quick restore pair operations
- To avoid any performance impact due to the quick restore operation
- Table 9 Requirements for reverse or quick restore pairresync operations
- Figure 6 BC P-VOL forming pair with Continuous Access XP S-VOL and external S-VOL, respectively
- Figure 7 BC P-VOL forming pair with external S-VOL and shared as Continuous Access XP S-VOL
- Figure 8 BC S-VOL forming pair with external P-VOL and shared as Continuous Access XP P-VOL
- Figure 9 BC P-VOL forming pair with Continuous Access XP Journal S-VOL and External S-VOL, respectively
- Figure 10 BC P-VOL forming pair with external S-VOL and shared as Continuous Access XP Journal S-VOL
- Pair status and time required for pairresync
- Pairsplit-E operation (suspend)
- Pairsplit-S operation (delete)
- BC options
- Cascade function
- Figure 12 Cascade pairs
- Table 11 Relationship between L1 pair status and L2 pair operations
- Table 12 Relationship between L2 pair status and L1 pair operations
- Table 13 Read/write operation (host to the node volume) and L1/L2 pair status
- Table 14 Read/write operation (host to the leaf volume) and L2 pair status
- At-Time Split function
- Pair status
- Cautions on switching off the power supply
- Cautions on using the XP10000
- Preparing for BC operations
- System requirements
- Preparing for BC operations
- Combining BC with other data management operations
- Combining BC and Continuous Access XP Journal operations
- Combining BC and Continuous Access XP operations
- Figure 18 BC and Continuous Access XP: shared P-VOL/P-VOL
- Figure 19 BC and Continuous Access XP: shared P-VOL/S-VOL
- Figure 20 BC and Continuous Access XP: shared P-VOL/P-VOL and P-VOL/S-VOL
- Figure 21 BC and Continuous Access XP: shared S-VOL/P-VOL
- Figure 22 BC, Continuous Access XP Journal, and Continuous Access XP: Shared S-VOL/P-VOL/S-VOL
- Figure 23 BC, Continuous Access XP, and Continuous Access XP Journal: Shared S-VOL/P-VOL/S-VOL
- Combining BC with LUN Security XP Extension
- Copying access attributes
- License capacity of LUN Security XP Extension
- Starting BC
- Performing BC operations
- BC error codes
- Overview of BC operations
- Maximum pair calculations
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 70 |
| Size: | 1.03 MB |
Show table of contents
Read manual
Document Outline
- Contents
- Business Copy XP (BC) for the XP128/XP1024
- Overview of BC operations
- BC components
- BC requirements
- BC operations
- Set reserve attribute operation
- Reset reserve attribute operation
- Paircreate operation
- Initial copy operation
- Update copy operation
- Cascade function
- Pairsplit operation
- Pairresync operations
- Forward pairresync operation
- Backward pairresync operation
- Pair status and time required for pairresync
- Pairsplit-E operation (suspend)
- Pairsplit-S operation (delete)
- BC options
- Cascade function
- Figure 7 Cascade pairs
- Table 7 Relationship between L1 pair status and L2 pair operations
- Table 8 Relationship between L2 pair status and L1 pair operations
- Table 9 Read/write operation (host to the node volume) and L1/L2 pair status
- Table 10 Read/write operation (host to the leaf volume) and L2 pair status
- At-Time Split function
- Pair status
- Cautions on switching off the power supply
- Preparing for BC operations
- Performing BC operations
- Performing BC operations
- BC error codes
- Overview of BC operations
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 176 |
| Size: | 5.07 MB |
Show table of contents
Read manual
Document Outline
- About this guide
- 1 Overview of connection external arrays
- 2 Preparing for External Storage XP operations
- 3 Managing cache with external storage
- 4 External Storage XP panes
- 5 Configuring external LUs
- 6 Troubleshooting NAS Blade systems that include external arrays
- 7 Remote command devices
- 8 Troubleshooting External Storage XP
- A Notes on connecting external arrays
- B Required colume capacity for emulation types
- c Adjusting volume capacity for copy pair setting
- D Configuring MSA 1000/1500 as external arrays
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 64 |
| Size: | 914 KB |
Show table of contents
Read manual
Document Outline
- Contents
- Compatible PAV Function for the XP1024/XP128/XP12000/XP10000
- Overview of Compatible PAV Operations
- Preparing for Compatible PAV Operations
- Performing Compatible PAV Operations
- Monitoring Compatible PAV Activities
- Additional MVS Commands
- GTF I/O Tracing
- Figure 13 Sample Output of Display Command - Compatible PAV Base Device with 5 Aliases
- Figure 14 Sample Output of Display Command - Compatible Hyper PAV with 16 Aliases
- Figure 15 DEVSERV DISPLAY PATHS Command
- Figure 16 Sample DEVSERV QPAV Command (Compatible PAV)
- Figure 17 Sample DEVSERV QPAV Command (Compatible Hyper PAV)
- Figure 18 Sample Output of DEVSERV QPAV,SSID=xxxx Command (Compatible PAV)
- Figure 19 Sample Output of DEVSERV QPAV,SSID=xxxx Command (Compatible Hyper PAV)
- Figure 20 Sample Output of DS QP,xxxx,VOLUME Command (Compatible PAV)
- Figure 21 Sample Output of DS QP,xxxx,VOLUME Command (Compatible Hyper PAV)
- Figure 22 Sample Output of D IOS,HYPERPAV Command
- Using HCD to Define and View XP1024/XP128/XP12000/XP10000 LCUs and Compatible PAV Devices
- Using HCD to Define an XP1024/XP12000/XP10000 LCU and the Base and Alias Devices
- Figure 23 Basic HCD Panel
- Figure 24 Define, Modify, Or View Configuration Data
- Figure 25 Add Control Unit Panel
- Figure 26 Selecting the Operating System
- Figure 27 Select, Change Option
- Figure 28 Control Unit Chpid, CUADD, and Device Address Range Addressing
- Figure 29 Define, Modify, Or View Configuration Data
- Figure 30 I/O Device List
- Figure 31 Add Device
- Figure 32 Device / Processor Definition Panel - Selecting the Processor ID
- Figure 33 Define Device / Processor Panel
- Figure 34 Define Device to OS Configuration Window - Selecting the OS Configuration
- Figure 35 Select / Disconnect Option
- Figure 36 Define Device Parameters / Features
- Displaying Compatible PAV Device Parameters
- Using HCD to Define an XP1024/XP12000/XP10000 LCU and the Base and Alias Devices
- Checking the WLM PAV Settings
- Settings about Compatible Hyper PAV
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 108 |
| Size: | 1.78 MB |
Show table of contents
Read manual
Document Outline
- HP StorageWorks Continuous Access XP user guide for the XP1024/XP128
- Contents
- About this guide
- 1 Continuous Access XP for the XP1024/XP128
- Overview of Continuous Access XP operations
- Components
- Figure 1 Continuous Access XP components for Fibre Channel connections
- Figure 2 Continuous Access XP components for Serial (ESCON) connections
- XP1024/XP128
- Main and remote control units (MCUs and RCUs)
- Volume pairs (P-VOLs and S-VOLs)
- Continuous Access XP Asynchronous consistency groups
- Remote copy connections
- Initiator ports and RCU target ports
- Remote control ports (RCPs) and local control ports (LCPs)
- Command View XP management station or XP Remote Web Console
- Host failover software
- Remote copy operations
- Continuous Access XP Asynchronous recordset operations
- Continuous Access XP Asynchronous consistency group operations
- Continuous Access XP volume pair status
- Components
- Preparing for Continuous Access XP operations
- System requirements
- Requirements and restrictions
- Installing hardware
- Configuring MCUs and RCUs for Continuous Access XP operations
- Combining Continuous Access XP with other data management operations
- Combining Continuous Access XP and BC
- Table 10 Host pair status reporting for Continuous Access XP, BC, and Continuous Access XP/BC shared volumes
- Table 11 Data currency of a shared Continuous Access XP/BC volume
- Figure 15 Shared Continuous Access XP P-VOL and shared BC P-VOL
- Figure 16 Shared Continuous Access XP S-VOL and shared BC P-VOL
- Figure 17 Shared Continuous Access XP/BC P-VOL and shared Continuous Access XP S-VOL/BC P-VOL
- Figure 18 Shared BC S-VOL/Continuous Access XP P-VOL
- Combining Continuous Access XP and BC
- Starting Continuous Access XP
- Figure 19 Continuous Access XP main pane
- Continuous Access XP panes
- Continuous Access XP main pane (Pair Operation pane)
- RCU Operation pane
- Asynchronous Operation pane
- Usage Monitor pane
- History Operations pane
- Performing Continuous Access XP configuration operations
- MCU operations
- RCU operations
- Viewing RCU Status (RCU Status)
- Registering RCUs (Add RCU)
- Modifying RCU options (Change RCU Option)
- Deleting RCUs (Delete RCU)
- RCU path parameters
- Adding and deleting logical paths for RCUs (Add Path/Delete Path)
- Adding and deleting SSIDs for RCUs (Add SSID/Delete SSID)
- Port change operation
- Modifying parameters and deleting settings
- Continuous Access XP Asynchronous operations
- Usage Monitor operations
- Optimizing Continuous Access XP operations and disk array performance
- Discontinuing Continuous Access XP operations
- Performing Continuous Access XP pair operations
- Preparing for Continuous Access XP volume pair operations
- Common procedure for Continuous Access XP pair operations
- Viewing Continuous Access XP pair status for LUs and LDEVs (Pairdisplay)
- Creating Continuous Access XP volume pairs (Paircreate)
- Splitting Continuous Access XP pairs (Pairsplit-r)
- Resuming Continuous Access XP volume pairs (Pairresync)
- Deleting Continuous Access XP volume pairs (Pairsplit-S)
- Changing pair options (Change Pair Option)
- Using Continuous Access XP for data migration and duplication
- Powering off and on Continuous Access XP components
- Continuous Access XP disaster recovery operations
- Error codes and messages
- Pinned track recovery for Continuous Access XP volumes
- Overview of Continuous Access XP operations
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 113 |
| Size: | 1.37 MB |
Show table of contents
Read manual
Document Outline
- XP24000/XP20000 Business Copy Software User Guide
- Contents
- 1 Overview of HP StorageWorks XP Business Copy Software
- 2 About XP Business Copy Operations
- 3 Interoperability with Other Products and Functions
- Open Volume Management
- Cache Residency Manager
- LUN Manager
- Data Retention Utility
- XP Auto LUN
- HP StorageWorks XP External Storage Software
- XP Continuous Access
- XP Continuous Access Journal
- XP Continuous Access and XP Continuous Access Journal
- HP StorageWorks XP Thin Provisioning Software
- VERITAS NetBackup DataCenter
- 4 Preparing for XP Business Copy Operations
- 5 Using the XP Business Copy GUI
- 6 Performing XP Business Copy Operations
- Configuring the Volume List
- Changing or Deleting the Settings in Preview List
- Setting or Resetting the Reserve Attribute
- Setting Options
- Creating Pairs
- Splitting Pairs
- Suspending Pairs
- Resynchronizing Pairs
- Deleting Pairs
- Viewing Detailed Volume and Pair Information
- Viewing S-VOL Path Information
- Viewing the Number of Pairs and License Information
- Viewing Pair Operation History
- 7 Troubleshooting
- 8 Support and Other Resources
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 84 |
| Size: | 797 KB |
Show table of contents
Read manual
Document Outline
- XP Snapshot User Guide
- 1 Overview of copy solutions
- 2 XP Snapshot functions
- 3 Requirements for XP Snapshot operations
- 4 Using XP Snapshot
- 5 XP Snapshot operations
- Displaying the XP Business Copy main pane
- Creating or deleting pools
- Creating or deleting virtual volumes
- Creating XP Snapshot pairs
- Storing snapshot data
- Restoring XP Snapshot pairs
- Deleting snapshot data
- Deleting XP Snapshot pairs
- Displaying detailed information about XP Snapshot pairs
- Displaying operation history
- 6 Troubleshooting
- 7 Support and other resources
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 129 |
| Size: | 4.25 MB |
Show table of contents
Read manual
Document Outline
- HP StorageWorks XP24000 Performance Monitor User's Guide
| Recognized languages: | English |
|---|---|
| Pages: | 28 |
| Size: | 326 KB |
Show table of contents
Read manual
Document Outline
- Contents
- About this guide
- Cache LUN Introduction
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 245 |
| Size: | 9.06 MB |
Show table of contents
Read manual
Document Outline
- XP24000/XP20000 Continuous Access Journal Software User Guide
- Contents
- 1 Overview of HP StorageWorks XP Continuous Access Journal Software
- 2 About XP Continuous Access Journal Operations
- Functionality Overview
- XP Continuous Access Journal Components
- Storage Systems
- XP Continuous Access Journal Software
- Logical Disk Controllers
- Main and Remote Control Units (Primary Storage Systems and Secondary Storage Systems)
- Consistency Groups
- Remote Copy Connections
- Initiator Ports and RCU Target Ports
- Journal Groups
- Data Volume Pairs
- Journal Volumes
- Host Failover Software
- XP Continuous Access Journal Remote Copy Operations
- Journal Processing
- XP Continuous Access Journal Delta Resync Operation
- Journal Obtain at XP Continuous Access Synchronous Secondary Site
- Switching the Master Journal Group of XP Continuous Access Journal
- Pair Status
- 3 Preparing for XP Continuous Access Journal Operations
- Requirements and Restrictions
- Installing the Hardware
- Configuring the Primary and Secondary Storage Systems for XP Continuous Access Journal Operations
- Using Multiple Primary and Secondary Storage Systems
- 3DC Multi-target Configuration of Three XP Continuous Access Journal Sites
- 3DC Cascading Configuration of Three XP Continuous Access Journal Sites
- Enabling the XP Continuous Access Journal Option
- Interoperability with Other Products and Functions
- LUSE
- Virtual LUN
- Cache Residency Manager
- LUN Manager
- XP Thin Provisioning
- XP Performance Control
- XP Business Copy
- XP Continuous Access Synchronous (3DC Cascading Configuration)
- XP Continuous Access Synchronous (3DC Multi-Target Configuration)
- Hardware Configuration
- Setup Procedure
- Requirements for Creating an XP Continuous Access Journal Pair for the Delta Resync Operation
- Requirements for Performing the Delta Resync Operation
- Configuring Delta Resync Operation Environment that uses Remote Command Devices
- Changing to a 3DC Multi-Target Configuration After Recovering from Primary Site Failures
- Transferring Business Tasks from an XP Continuous Access Secondary Site to the Primary Site (in a 3DC Cascading Configuration)
- Transferring Business Tasks from the XP Continuous Access Secondary Site to the Primary Site (in a 3DC Multi-target Configuration)
- Transferring Business Tasks from XP Continuous Access Secondary Site to Primary Site (When Delta Resync Operation is Performed in 3DC Multi-target Configuration)
- Recovering from Failures at the Primary Site and the XP Continuous Access Synchronous Secondary Site
- Transferring Business Tasks from the XP Continuous Access Journal Secondary Site to the Primary Site
- XP Continuous Access Synchronous (2DC Configuration)
- Basic Behavior
- Hardware Configuration
- Setup Procedure
- Restrictions About 2DC
- Changing to 2DC Configuration after Recovering from Primary Site Failures
- Data Retention Utility
- Performance Monitor
- XP Auto LUN Software
- Planning of Journal Volumes
- Factors That Determine Data Transfer Speed Between the Primary and Secondary Storage System
- Performing Remote Copy Between an XP12000/XP10000 Disk Array and an XP24000/XP20000 Disk Array
- 4 Using the XP Continuous Access Journal GUI
- 5 Configuring Storage Systems and Logical Paths
- Reviewing System Configuration Tasks
- Configuring Port Attributes
- Configuring Storage System Options
- Establishing the Relationship Between Primary and Secondary Storage Systems (Add DKC)
- Changing Options for Logical Paths and Storage Systems
- Adding Logical Paths
- Viewing the Status of Logical Paths
- Deleting Logical Paths
- Managing Power for Storage Systems and Network Relay Devices
- Removing the Relationship Between Primary and Secondary Storage Systems
- 6 Using Journal Groups
- Reviewing Administrator Tasks for Managing Journals
- Registering Journal Volumes in a Journal Group
- Deleting Journal Volumes from a Journal Group
- Displaying Detailed Information about a Journal Group
- Changing Options for a Journal Group
- Deleting a Journal Group
- Splitting a Mirror (Pairsplit-r: Suspending a Copy Operation)
- Restoring a Mirror (Pairresync: Resuming a Copy Operation)
- Deleting Data Volumes from a Mirror (Pairsplit-S: Ending a Copy Operation)
- Assigning Remote Command Devices to Mirrors
- Releasing Assigned Remote Command Device
- 7 Performing XP Continuous Access Journal Pair Operations
- Reviewing the Pair Operation Window
- Creating a Pair of Data Volumes (Paircreate)
- Displaying Detailed Information about a Pair of Data Volumes
- Changing Options for a Data Volume Pair
- Splitting a Pair of Data Volumes (Pairsplit-r)
- Restoring a Pair of Data Volumes (Pairresync)
- Releasing a Pair of Data Volumes (Pairsplit-S)
- Creating a Point-in-Time Copy of Data Volumes
- Recovering a Pinned Track
- 8 Usage Monitor Operations
- 9 Performing Disaster Recovery Operations
- Preparing for Disaster Recovery
- Recovering from Primary Site Failures in XP Continuous Access Journal 3DC Multi-Target Configuration (When Delta Resync Operation is Performed)
- Recovering from Primary Site Failures in XP Continuous Access Journal 3DC Cascading configuration
- Recovering from a Failure in the Intermediate Site in a 3DC Cascading Configuration
- Recovering from a Failure by Duplicating Volumes in a 3DC Cascading Configuration
- Recovering from a Disaster in a 3DC Cascading Configurationof XP Continuous Access Journal and XP Continuous Access Synchronous
- Recovering from Primary Site Disaster in a 3DC Multi-Target Configuration
- Recovering from Primary Site Failures in 3DC Multi Target Configuration of XP Continuous Access Journal and XP Continuous Access Synchronous (When Delta Resync Operation Is Performed)
- Recovering from a Disaster in a 2DC Configuration of XP Continuous Access Journal and XP Continuous Access Synchronous
- Recovering the Primary Site from a Failure When the System Consists of Multiple Primary and Secondary Storage Systems
- 10 Troubleshooting
- 11 Support and Other Resources
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 48 |
| Size: | 359 KB |
Show table of contents
Read manual
Document Outline
- Hitachi Extended Remote Copy for Mainframe user guide
- About this Guide
- 1 Overview of Copy Solutions
- 2 Overview of XRC for Mainframe Operations
- 3 Requirements and Restrictions
- 4 Preparing for XRC for Mainframe Operations
- 5 XRC for Mainframe Panels
- 6 Performing XRC for Mainframe Operations
- 7 Troubleshooting
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 74 |
| Size: | 1.18 MB |
Show table of contents
Read manual
Document Outline
- HP StorageWorks Snapshot XP user guide
- Contents
- About this guide
- 1 Overview of copy solutions
- 2 Snapshot XP functions
- 3 Requirements for Snapshot XP operations
- 4 Using Snapshot XP
- Procedure for using Snapshot XP processes
- Status of Snapshot XP pairs
- Notes on creating pools
- Notes on using Snapshot XP
- Combining Snapshot XP with other software products
- Table 8 Volume sharing with other software products
- Combining Snapshot XP with Business Copy XP
- Table 9 Snapshot XP operations when Snapshot XP P-VOL and Business Copy XP P-VOL are shared
- Table 10 Snapshot XP operations when Snapshot XP P-VOL and Business Copy XP S-VOL are shared
- Table 11 Business Copy XP operations when Snapshot XP P-VOL and Business Copy XP P-VOL are shared
- Table 12 Business Copy XP operations when Snapshot XP P-VOL and Business Copy XP S-VOL are shared
- Combining Snapshot XP with Continuous Access XP or Continuous Access XP Journal
- Table 13 Snapshot XP operations when Snapshot XP P-VOL and Continuous Access XP/Continuous Access XP Journal are shared
- Table 14 Snapshot XP operations when Snapshot XP P-VOL and Continuous Access XP/Continuous Access XP Journal S-VOL are shared
- Table 15 Continuous Access XP/Continuous Access XP Journal operations when Snapshot XP P-VOL and Continuous Access XP/Continuous Access XP Journal P-VOL are shared
- Table 16 Continuous Access XP/Continuous Access XP Journal operations when Snapshot XP P-VOL and Continuous Access XP/Continuous Access XP Journal S-VOL are shared
- Combining Snapshot XP with Auto LUN XP
- Combining Snapshot XP with LUN Security XP Extension
- 5 Snapshot XP operations
- Displaying the Business Copy XP main pane
- Creating or deleting pools
- Creating or deleting virtual volumes
- Creating Snapshot XP pairs
- Storing snapshot data
- Restoring Snapshot XP pairs
- Deleting snapshot data
- Deleting Snapshot XP pairs
- Displaying detailed information about Snapshot XP pairs
- Displaying operation history
- 6 Troubleshooting
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 85 |
| Size: | 748 KB |
Show table of contents
Read manual
Document Outline
- Contents
- XP Performance Control
- Optimal performance of high-priority hosts
- Automatically disabling upper limit control
- Overview of XP Performance Control procedures
- Notes on using XP Performance Control
- XP Performance Control restrictions
- Using XP Performance Control
- Starting XP Performance Control
- XP Performance Control pane
- Managing traffic between HBAs and ports
- Setting the priority of ports on arrays
- Measuring traffic between host bus adapters and ports for many-to-many connections
- Analyzing traffic statistics
- Setting upper limit values for traffic at non-prioritized ports or WWNs
- Setting thresholds
- Changing PFC names of host bus adapters (many-to-many connections only)
- Replacing host bus adapters (many-to-many connections only)
- Grouping host bus adapters
- Troubleshooting XP Auto LUN/Performance Base Monitor and XP Performance Control
- Support and other resources
- XP Performance Control Export Tool
- Overview of XP Auto LUN
- Exporting monitoring data to files
- Figure 1 Sample text file
- Files to be exported
- Table 2 XP Auto LUN panes and monitoring data that can be saved by the Export Tool
- Table 3 Files containing statistics on resource usage and write pending rates
- Table 4 Files containing statistics on parity, external volume, and V-VOL groups
- Table 5 Files containing statistics on logical volumes in parity, external volume, or V-VOL groups
- Table 6 Files containing statistics on ports
- Table 7 Files containing statistics on host bus adapters connected to ports
- Table 8 Files containing statistics on LU paths
- Table 9 Files containing statistics on PFC groups
- Table 10 Files containing statistics on host bus adapters belonging to PFC groups
- Table 11 Files with statistics on remote copy ops. by Cnt Ac and TrueCopy for z/OS (in the array)
- Table 12 Files with statistics on remote copy ops. by Cnt Ac and TrueCopy for z/OS (at LU paths)
- Table 13 Files with statistics on remote copy ops. by Cnt Ac and TC for z/OS (at logical vols. by CU)
- Table 14 Files with statistics on remote copy operations by Cnt Ac and TC for z/OS (at CLPR)
- Table 15 Files with statistics on remote copy operations by Cnt Ac-J and UR for z/OS (in the array)
- Table 16 Files with statistics on remote copy ops. by Cnt Ac and UR for z/OS (at journal groups)
- Table 17 Files with statistics on remote copy ops. by Cnt Ac-J and UR for z/OS (at LU paths)
- Table 18 Files with statistics on remote copy ops. by Cnt Ac-J and UR for z/OS (at logical vols. by CU)
- Preparing for using the Export Tool
- Using the Export Tool
- Command reference
- Table 22 Subcommand list
- Command syntax
- The svpip subcommand
- The retry subcommand
- The login subcommand
- The show subcommand
- The group subcommand
- The shortrange subcommand
- The longrange subcommand
- The outpath subcommand
- The option subcommand
- The apply subcommand
- The set subcommand
- The help subcommand
- The java command for exporting data In files
- Troubleshooting the Export Tool
- Limitations for storage partition administrators
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 170 |
| Size: | 2.48 MB |
Show table of contents
Read manual
Document Outline
- XP24000/XP20000 External Storage Software User Guide
- Contents
- 1 Overview of HP StorageWorks XP External Storage Software
- 2 About XP External Storage Operations
- Connecting External Storage Systems
- XP External Storage Components
- XP External Storage Operations
- Configuring XP External Storage
- Choosing Mapping Policy
- Using a Mapped External Volume from a Connected Host
- Interoperability with other Products and Functions
- LUN Manager and Configuration File Loader
- LUN Expansion (LUSE)
- Virtual LVI/LUN (VLL)
- Cache Residency Manager
- Performance Monitor and XP Auto LUN
- XP Continuous Access and Hitachi TrueCopy™ for Mainframe
- HP StorageWorks XP Continuous Access Journal Software and Hitachi Universal Replicator™ for Mainframe
- HP StorageWorks XP Business Copy Software and Hitachi ShadowImage™ for Mainframe
- HP StorageWorks XP Snapshot Software
- HP StorageWorks XP Thin Provisioning Software
- SNMP Agent
- Examples of Using External Volumes with Other Products
- 3 Preparing for XP External Storage Operations
- System Requirements
- Guidelines for XP External Storage Operations
- Mapping Guidelines
- Recommended Applications According to HDD Type
- Capacity Guidelines
- Guidelines for Mainframe Volumes
- Volume Attribute Guidelines
- Creating LUSE Volume Guidelines
- Maintenance Guidelines for an External Storage System
- Performance and Status Guidelines
- RAID Level Considerations
- AMS 2000 Series Guidelines
- Installing and Uninstalling XP External Storage
- Starting XP External Storage
- 4 Using the XP External Storage GUI
- 5 Performing XP External Storage Operations
- Overview of Setting Operations
- Setting Port of External Storage System
- Setting Port Attribute for Local Storage System
- Mapping an External Volume Automatically
- Mapping an External Volume Manually
- Setting the Cross-subsystem Paths
- Checking the External Volume Details
- Turning On or Off the Storage System
- Disconnecting External Storage System or Disconnecting External Volume
- Checking Connection Status and Resuming External Volume Operation
- Stopping the Use of Paths to the External Volume (Disconnect Paths)
- Restoring the Paths to the External Volume (Check Paths)
- Changing the Cache Mode Setting of the External Volume
- Changing the Inflow Control Setting of the External Volume
- Changing the Port Setting of the External Storage System
- Performing Maintenance for External Subsystem
- Editing Mapping Policy
- Deleting the External Volume Mapping (Delete Volume Command)
- 6 Using Spreadsheets for XP External Storage Operations
- Introduction
- Before Using Spreadsheets
- Available Types and Operation Tags
- Saving Storage System Information
- Mapping External Volumes
- Disconnecting an Individual External Volume (DisconnectVolume Tag)
- Resuming an Individual External Volume (CheckPath-RestoreVolume Tag)
- Deleting the External Volume Mapping (DeleteVolume Tag)
- Changing Path Group
- Example of a Spreadsheet
- 7 Remote Command Devices
- 8 Troubleshooting
- 9 Support and Other Resources
- A Connecting External Storage Systems
- AMS/WMS Storage System
- System Parameters
- Relationship between the Serial Number and the AMS/WMS Model
- Relationship between the WWN of the Port and Controller (AMS/WMS)
- Path Status and Examples of the Recovery Procedure (AMS/WMS)
- P9500 Disk Array
- Path status and examples of recovery procedure
- Notes on Using the Power Savings Option (AMS/WMS)
- Thunder 9500V Storage System
- USP V/VM Storage System
- TagmaStore USP/NSC Storage System
- Lightning 9900V Storage System
- Lightning 9900 Storage System
- SVS200 Storage System
- HP StorageWorks EVA Storage System
- Sun StorEdge 6120/6320
- Sun StorageTek FlexLine 380
- Sun StorageTek 2540
- Sun StorageTek V2X2
- EMC CLARiiON CX Series
- EMC Symmetrix Series
- IBM DS3000/DS4000/DS5000 Series
- System Parameter for Connecting IBM SVC Series
- Notes on Connecting IBM XIV Series
- Fujitsu FibreCAT CX Series
- Non-HP Storage Systems
- AMS/WMS Storage System
- B Required Volume Capacity for Each Emulation Type
- C Adjusting the Volume Capacities for Pairs
- D The ExPath Tool
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 151 |
| Size: | 2.80 MB |
Show table of contents
Read manual
Document Outline
- XP24000/XP20000 Remote Web Console User Guide
- Contents
- 1 About Remote Web Console Operations
- Overview of Remote Web Console
- Remote Web Console Features
- User Access Levels
- Overview of Audit Logs
- Overview of Configuration File Loader Operations
- Overview of SSL-Encrypted Communications
- Encryption Function Enhancement (Solution to the Year 2010 Encryption Problem)
- Single Sign-on from HP Systems Insight Manager
- Important Terms and Concepts
- 2 Installation Requirements and Procedures
- 3 Using the Remote Web Console GUI
- Common Elements of the Remote Web Console Main Windows
- License Key Window
- Identity Window
- Port Status Window
- Alerts Window
- Account Window
- Login Message Window
- Syslog Window
- Audit Log Transfer Window
- Audit Log Setting Window
- Encryption Window
- E-mail Information Window
- Configuration File Loader Window
- Reports Display Dialog Boxes
- Tool Panel
- Control Panel
- 4 Performing Remote Web Console Operations
- Enabling and Disabling Remote Web Console Options
- Launching the Desired Option
- Managing the User Accounts
- Reporting SIMs by Email
- Setting the Environment Parameters
- Downloading the Configuration Files
- Restoring Backups of the Configuration Files
- Downloading Trace Files Using the FD Dump Tool
- Using Configuration File Loader
- Registering and Deleting the Certificates of HP Systems Insight Manager
- 5 Using the CFL Extension
- 6 Troubleshooting
- 7 Support and Other Resources
- A Audit Logs for Single Sign-On
- B Error Codes for Single Sign-On
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 43 |
| Size: | 508 KB |
Show table of contents
Read manual
Document Outline
- XP24000/XP20000 LUN Expansion User Guide
- Contents
- 1 About LUSE Operations
- 2 Preparing for LUSE Operations
- 3 Using the LUSE GUI
- 4 Performing LUN Expansion (LUSE) Operations
- 5 Using Spreadsheets for LUSE Operations
- 6 Troubleshooting
- 7 Support and Other Resources
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 169 |
| Size: | 2.51 MB |
Show table of contents
Read manual
Document Outline
- XP External Storage Software User Guide
- Contents
- 1 Overview of connecting external arrays
- 2 Preparing for XP External Storage operations
- Supported storage platforms and firmware
- Prerequisites
- System requirements
- XP External Storage requirements
- Installing XP External Storage
- Preparing for XP External Storage settings
- Powering arrays on or off
- Using mapped external LUs from the host connected to the local array
- Uninstalling XP External Storage
- Limitations on XP External Storage operations
- Combining XP External Storage with other HP products
- 3 Managing cache with external storage
- 4 XP External Storage panes
- 5 Configuring external LUs
- Overview of configuring external LUs
- Setting an external array's port
- Setting a local array's port attributes
- Discovering and Mapping LUs
- Setting alternate paths for external LUs
- Adding alternate paths by selecting multiple external LUs (Add Paths)
- Deleting alternate paths by selecting multiple external LUs (Delete Paths)
- Checking an external LU's status (LDEV Information)
- Disconnecting external arrays or LUs
- Checking the connection status and resuming external LU operations (Check Paths & Restore Vol.)
- Restoring external LUs (LDEV Restore)
- Changing the cache mode setting of the external LU
- Changing the cache mode of all external LUs in an external array
- Changing the cache mode of an individual external LU
- Stopping the use of paths to an external LU by specifying an external array's WWN (Disconnect Paths)
- Restoring paths to an external LU by specifying an external array's WWN (Check Paths)
- Changing an external array's port setting
- Stopping the use of paths to an external LU by specifying a local array's port (Disconnect Paths)
- Restoring paths to an external LU by specifying a local array's port (Check Paths)
- Deleting external LU mappings (Delete LU)
- 6 Troubleshooting NAS Blade systems that include external arrays
- 7 Remote command devices
- 8 Troubleshooting XP External Storage
- 9 Support and other resources
- A Notes on connecting external arrays
- Connecting Thunder 9500V subsystems
- System parameters for connecting Thunder 9500V subsystems
- Relationship between serial number and array model of Hitachi Thunder 9500V subsystem
- Relationship between the WWN of the port on the Thunder 9500V subsystem and the controller
- Path status and examples of recovery procedures (Thunder 9500V subsystems)
- Connecting TagmaStore AMS and TagmaStore WMS subsystems
- System parameters for connecting TagmaStore AMS and TagmaStore WMS subsystems
- Relationship between serial numbers in device list on the LU operation panel and TagmaStore AMS and TagmaStore WMS subsystem models
- Relation between the WWN of the port on the TagmaStore AMS or TagmaStore WMS subsystem and controller
- Path status and examples of recovery procedure (TagmaStore AMS and TagmaStore WMS subsystems)
- Notes When Power Saving Feature is Used (For TagmaStore AMS Subsystem, TagmaStore WMS Subsystem)
- Connecting VSP Subsystem
- Connecting XP24000/XP20000 Disk Arrays
- Connecting XP12000/XP10000 Disk Arrays
- Connecting XP1024/XP128 Disk Arrays
- Connecting XP512/XP48 Disk Arrays
- Connecting HP 200 Storage Virtualization System as external storage
- Connecting EVA arrays
- System parameter settings for connecting EVA arrays
- Identifying logical volumes of EVA arrays (using Characteristic 2)
- Alternate path's behavior when an EVA array is connected
- System parameter settings for connecting Sun StorEdge 6120/6320
- System parameter settings for connecting Sun StorageTek FlexLine 380
- System parameter settings for connecting Sun StorageTek 2540
- Alternate paths for connecting Sun StorageTek V2X2
- Connecting EMC CLARiiON CX Series
- Notes on Connecting EMC CLARiiON CX Series
- System Parameter for Connecting EMC Symmetrix Series
- System parameter settings for connecting IBM DS4000 Series
- Alternate Path Mode for Connecting IBM DS8000 Series
- IBM V7000 Series
- Non-HP arrays
- Connecting Thunder 9500V subsystems
- B Required volume capacity for emulation types
- C Adjusting volume capacity for copy pair setting
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 131 |
| Size: | 1.61 MB |