Deleting cvs volumes – HP StorageWorks XP Remote Web Console Software User Manual
Page 183
LUN Configuration and Security Manager XP user guide for the XP12000/XP10000/SVS200 183
11.
After setting all CU and LDEV numbers, click Next. If the selected LDEV number’s boundary area does
not have an SSID, the SSID setting pane appears. Go to
. If the selected LDEV number’s
boundary area has an SSID, go to
12.
On the SSID setting pane, select the CU number.
13.
In the Input SSID list, select a new SSID.
NOTE:
When you log in as a storage administrator and the SSID number of another SLPR is used
check box is selected, you can also enter an SSID in the Input SSID list.
14.
Click Set. The SSID appears in the SSID box of the SSID setting area.
15.
To set two or more SSIDs, repeat
.
16.
After setting all SSIDs, click Next. The Install CV confirmation dialog box appears.
17.
Verify that the information displayed in the Install CV confirmation dialog box is correct, and click OK.
New settings appear in blue bold italics in the LDEV Information table on the Customized Volume
pane.
NOTE:
Setting changes are not yet implemented in the array. You cannot manipulate blue VDEVs
until you click Apply to apply the changes to the array or Cancel to cancel them, but you can install
additional CVs in VDEVs with red icons.
18.
To apply the changes to the array, click Apply (or Cancel to cancel them).
19.
Click OK.
NOTE:
When the Install CV operation starts, a notation appears across the bottom of the pane
indicating the progress and completion at the end of operation.
Deleting CVS volumes
To delete an individual CVS volume within a VDEV, use the Volume to Space operation (see ”
Converting CVs back to FVs (Volume Initialize operation)
CAUTION:
The Volume Initialize function is a destructive operation. Data on the CVS volume being
converted is lost when the operation is complete. You are responsible for backing up data as needed
before performing this operation.
Use the Volume Initialize function to convert a CVS volume back to a fixed volume. This operation
de-installs all variable-sized volumes under a CVS volume, and reformats the CVS volume as a normal FV
(fixed volume).
CAUTION:
An error message might appear if a Volume Initialize and Make Volume operation are
performed concurrently. For this error message, the part code is 0003 and the error number is 1041. If
this message appears, ensure that these operations are performed separately.
1.
On the upper right of the XP Remote Web Console main pane, select a CU group from the drop-down
list.
2.
From the Customized Volume pane, select the LDEV folder on the Parity Group - LDEV tree to display a
list of VDEVs, and select a VDEV. The LDEV Information table displays detailed information about the
LDEVs.