HP StorageWorks XP Remote Web Console Software - Manual (Page 145)

LUN Configuration and Security Manager XP user guide for the XP12000/XP10000/SVS200 145
Select an LDEV list
Displays the selected CU’s LDEVs, CVS volumes, and LUSE volumes that are eligible to become part of a
LUSE volume. The selected LDEV number becomes the top LDEV number of a LUSE volume.
Volume Count list
Number of LDEVs forming a LUSE volume.
For example, if you select 3 in the Volume Count list, three LDEVs are expected to form a LUSE volume
and three LDEVs are added to the Expanded LDEVs list.
NOTE: You can select only LDEVs from the Volume Count list. You cannot select LUSE volumes.
Free LDEVs table
Displays the LDEVs, CVS volumes, or LUSE volumes selected in the Select an LDEV list that are eligible to
become part of a LUSE volume.
• LDEV: LDEV status icon ( Table 32 ) and CU and LDEV numbers. If the selected LDEV is a LUSE volume,
the LDEV number of the top LDEV in the LUSE volume appears.
NOTE: If an LDEV number ends with # (for example, 00:01#), the LDEV is an external LU. For
more information about external LUs, see the HP StorageWorks External Storage XP user guide.
NOTE: If an LDEV number ends with V (for example, 00:01V), the LDEV is a virtual volume
(V-VOL). For more information about V-VOLs, see the HP StorageWorks Snapshot XP user guide.
• RAID: LDEV’s RAID level.
NOTE: The RAID level is left unspecified with a hyphen (-) when the LDEV is an external LU or
virtual volume (V-VOL).
• PG: Combination of the disk group and parity group. If the LDEV extends over two or more parity
groups, the smaller parity group number appears.
NOTE: If a parity group number starts with E (for example, E1-1), the parity group consists of one
or more external LUs.
NOTE: If a parity group number starts with V (for example, V1-1), the parity group consists of one
or more virtual volumes (V-VOLs).
• CLPR: CLPR number and name. The CLPR number consists of two digits. The CLPR name consists of up
to six characters. For more information about cache logical partitions (CLPRs), see the
HP StorageWorks XP Disk/Cache Partition user guide.
• Selected LDEVs: Number of LDEVs selected in the Free LDEVs table.
Expanded LDEVs list
Displays LDEVs selected as LUSE volume components. An LDEV is added to this list by clicking Add.
• Selected LDEVs: Number of LDEVs selected in the Expanded LDEVs list.
• Number of LDEVs: Number of LDEVs displayed in the Expanded LDEVs list.
• Size: Total capacity of LDEVs displayed in the Expanded LDEVs list, in either GB or MG.