HP StorageWorks XP Remote Web Console Software - Manual (Page 172)

172 Custom Volume Size operations
NOTE: The SSID number of another SLPR is used check box appears only when you log in as a
storage administrator and when there are two or more SLPRs.
NOTE: You cannot enter the number in the Input SSID list when the SSID number of another SLPR
is used check box is cleared.
• Set: Sets the SSID you select or enter in Input SSID list to the table. The Set SSID table displays the new
SSID.
• Back: Cancels the SSID setting, and returns to the Make Volume pane (2).
• Next: Displays the Make Volume pane (4) (confirmation pane).
• Cancel: Returns to the Customized Volume pane.
Make Volume pane (4)
Use this pane to confirm the settings of the CVS volumes to be created.
Figure 103 Make Volume pane (4) for confirming Make Volume settings
This pane has the following features:
• CVS volume-setting information table: Displays a list of CVS volumes to be created.
• VDEV: VDEV number for the CVS volume to be created. The VDEV number indicates the parity
group where the VDEV belongs. For example, if VDEV number 1-1-(1) appears, the VDEV belongs
to parity group number 1-1.
NOTE: If a VDEV number starts with E (for example, E1-1-(1)), the VDEV belongs to a parity group
that consists of one or more external LUs.
NOTE: If a VDEV number starts with V (for example, V1-1-(1)), the VDEV belongs to a parity
group that consists of one or more virtual volumes (V-VOLs).
• Emulation: Emulation type of the CVS volume to be created (OPEN-V).
• Capacity: CVS volume’s capacity displayed in the unit selected from the Capacity Unit list in the
Make Volume pane (1).