HP StorageWorks XP Remote Web Console Software - Manual (Page 66)

66 LUN Manager panes
iSCSI Function box
Use this box to perform iSCSI-related operations.
Figure 26 iSCSI Function box
• Ping: Issues a ping command from an iSCSI port to a host.
• Register: Registers information about iSCSI ports in the iSNS server.
• Delete: Removes information about iSCSI ports from the iSNS server.
Change Port Mode box
This box appears when you select an icon under the Fibre folder in the Package tree.
Use this box to change information in the Port table.
Information in this box differs depending on the type of channel adapter package selected in the tree:
• If you select a Fibre Channel channel adapter, this box displays items related to Fibre Channel ports.
Figure 27 Change Port Mode box (Fibre Channel ports)
• Select a Port: To change settings for a port, select the port from this list.
• Host Speed: The text box on the left displays the selected port’s data transfer speed.
Use the list on the right to specify the selected port’s data transfer speed. If you select Auto, the
array automatically sets the data transfer speed to 1 Gbps or 2 Gbps. Gbps is the acronym for
Gigabits per second.
NOTE: If you are using a 2 Gbps HBA and switch, set the CHF port’s transfer speed to 2 Gbps. If
you are using a 1 Gbps HBA and switch, set the CHF port’s transfer speed to 1 Gbps. If the Auto
Negotiation setting is required, the linkup might be incorrect at server reboot. Check the channel
lamp. If it is blinking, remove and re-insert the cable to perform the signal synchronization and
linkup.
• Fibre Addr.: The text box on the left displays the selected port’s address.
Use the list on the right to specify the selected port’s address.
• Fabric: The text box on the left indicates whether a fabric switch is used. This option must be set to
ON if a fabric switch is used. This option must be set to OFF if a fabric switch is not used.
Use the list on the right to specify whether a fabric switch is used.