HP StorageWorks XP Remote Web Console Software - Manual (Page 56)

56 LUN Manager panes
Figure 15 LUN Manager pane (icon under iSCSI folder selected)
LU Path tree
Use this tree to find information about LU paths. When you select a host group from this tree, the table on
the right displays information about LU paths associated with the selected host group.
The Subsystem folder is located at the top of the tree. The Fibre, NAS, and iSCSI folders appear below the
Subsystem folder.
Fibre folder
If you double-click the Fibre folder, Fibre Channel ports in the array appear as icons. The port name, port
address, LUN security status, and port attribute (that is, whether the port is an initiator, target, RCU target,
or external port) appear on the right of each icon.
NOTE: The Fibre folder does not appear if the array does not contain any Fibre Channel adapters.
Figure 16 Fibre folder
Table 7 Fibre Channel port icons
Icon Status
Port in Standard mode. LUN security is disabled on the port.
Port in Standard mode. LUN security is enabled on the port.
Port in High Speed mode. LUN security is disabled on the port.