HP StorageWorks XP Remote Web Console Software - Manual (Page 169)

LUN Configuration and Security Manager XP user guide for the XP12000/XP10000/SVS200 169
• Next: Displays the Make Volume pane (2). When no CV is set, no volume is made in the VDEV by the
Make Volume operation. In this case, this button displays a message, and returns to the Customized
Volume pane.
• Cancel: Cancels the selected settings, and returns to the Customized Volume pane.
Make Volume pane (2)
Use this pane to assign CU and LDEV numbers for the CVS volumes to be created.
Figure 101 Make Volume pane (2)
This pane has the following features:
• CVS volume-setting information table: On the upper right of the pane, displays detailed information
about the CVS volumes to be created.
• Parity Group: Number of the VDEV to be initialized. The VDEV number indicates the parity group
where the VDEV belongs. For example, if VDEV number 1-1-(1) appears, the VDEV belongs to
parity group number 1-1.
NOTE: If a VDEV number starts with E (for example, E1-1-(1)), the VDEV belongs to a parity group
that consists of one or more external LUs.
NOTE: If a VDEV number starts with V (for example, V1-1-(1)), the VDEV belongs to a parity
group that consists of one or more virtual volumes (V-VOLs).
• No.: CVS volume’s setting number.
• Emulation: CVS volume’s emulation type.
• Capacity: CVS volume’s capacity displayed in the capacity unit selected from the Capacity Unit list
on the Make Volume pane (1).
• CU:LDEV: CU and LDEV numbers for the CVS volume to be created. The default is blank.