HP StorageWorks XP Remote Web Console Software User Manual
Page 170
170 Custom Volume Size operations
NOTE:
If an LDEV number ends with # (for example, 00:01#), the LDEV is an external LU. For
more information about external LUs, see the HP StorageWorks External Storage XP user guide.
NOTE:
If an LDEV number ends with V (for example, 00:00V), the LDEV is a virtual volume
(V-VOL). For more information about virtual volumes, see the HP StorageWorks Snapshot XP user
guide.
•
Select LDEV No. area: Used to set LDEV numbers for the CVS volumes you are creating.
• Select CU No.: CU number. The default is CU 00. The settings of LDEV numbers for the selected CU
number appear in the Select LDEV No. table.
• Interval: When you select more than one volume, used to set the interval between the LDEV
numbers that need to be assigned to the newly created volumes. The default value is 0. When you
select 0, consecutive LDEV numbers are assigned.
NOTE:
The value you specify as the interval between LDEV numbers counts only available LDEV
numbers and skips those that are not selectable.
• Select LDEV No. table: Displays the settings of LDEV numbers for the CU number selected from the
Select CU No. list. Gray indicates the LDEV numbers that are not selectable, white indicates unused
LDEV numbers, and blue indicates available LDEV numbers. You can select an LDEV number from
the white LDEV numbers in the table. When you set the LDEV number, that LDEV number becomes
available and changes to blue.
NOTE:
LDEV numbers that are not selectable may be already in use or already assigned to
another emulation group (grouped by 32 LDEV numbers) (see
NOTE:
If an LDEV number ends with # (for example, 00:01#), the LDEV is an external LU. For
more information about external LUs, see the HP StorageWorks External Storage XP user guide.
NOTE:
If an LDEV number ends with V (for example, 00:00V), the LDEV is a virtual volume
(V-VOL). For more information about virtual volumes, see the HP StorageWorks Snapshot XP user
guide.
•
CU number of another SLPR is used: When selected, you can select the number of an LDEV that does
not exist in the SLPR to which the parity group does not belong. When cleared, you can only select the
number of an LDEV in the SLPR to which the parity group belongs.
NOTE:
The CU number of another SLPR is used check box appears only when you log in as a
storage administrator and when there are two or more SLPRs.
•
Back: Returns to Make Volume pane (1).
•
Next: Opens one of the following panes:
• If the selected LDEV number’s boundary area does not have an SSID, the Make Volume pane (3)
for setting an SSID appears.
• If the selected LDEV number’s boundary area has an SSID, the Make Volume pane (4) appears.
•
Cancel: Cancels the settings for the LDEV, and returns to the Customized Volume pane.