HP StorageWorks XP Remote Web Console Software - Manual (Page 72)

72 LUN Manager panes
• Time out: Period of time between authentication sessions to the same port. If the previous
authentication session to a port failed, the next authentication session starts after the specified period
of time elapses. The unit is seconds.
• Refusal Intvl.: If authentication fails for the number of times specified in Refusal Freq., connection to the
port fails. Refusal Intvl. is the interval from when connection to a port fails to when the next
authentication session starts. The unit is minutes.
• Refusal Freq.: Number of times of authentication for connecting to a port is allowed. If authentication
fails for the specified number of times, connection to the port fails.
FC Switch Information list
• Port Name: Fibre Channel port name. For more information, see Table 3, Table 4, Table 5, and
Table 6.
• User Name: Fibre Channel switch’s user name.
• Mode: Mode of authentication between ports and Fibre Channel switches. If the authentication mode
is mutual, bi-directional appears. If the authentication mode is not mutual, unidirectional appears.
• Authentication: Specifies if authentication for the Fibre Channel switch is performed. If the Fibre
Channel switch is a target of user authentication, Enable appears. If the host is not a target of user
authentication, Disable appears.
Authentication information (Target) list
Fibre folder
Displays user information for host groups allowed to connect to the port or host group selected in the tree.
• Group Name: Host group name.
• User Name: Host group’s user name. When a user name is not defined for a host group, this column is
blank.
• Authentication: Specifies if authentication for the host is performed. If the host is a target of user
authentication, Enable appears. If the host is not a target of user authentication, Disable appears.
iSCSI folder
Displays user information for iSCSI targets allowed to connect to the port or iSCSI target selected in the
tree.
• Target Name: iSCSI target’s iSCSI name.
• User Name: iSCSI target’s user name. When a user name is not defined for an iSCSI target, this
column is blank.
• Authentication: Indicates whether authentication of the host is performed. If the host is a target of user
authentication, Enable appears. If the host is not a target of user authentication, Disable appears.
Authentication Information (Host) list
Fibre folder
Displays host user information for the port or host group selected in the tree.
In this list, you can register up to 64 user information items.
• Group Name: Host group name.
• User Name: Host’s user names. When a user name is not defined for a host, this column is blank.
• Protocol: Protocol used in the user authentication.
iSCSI folder
Displays host user information for the port or iSCSI target selected in the tree.
In this list, you can register up to 64 user information items.
• Target Name: Host bus adapter’s iSCSI name.
• User Name: Host’s user name. When a user name is not defined for a host, this column is blank.
• Protocol: Protocol used in the user authentication.