HP StorageWorks XP Remote Web Console Software - Manual (Page 159)

LUN Configuration and Security Manager XP user guide for the XP12000/XP10000/SVS200 159
Install CV pane (1) for OPEN-V
Figure 94 shows the first Install CV pane that appears when the selected emulation type is OPEN-V.
Figure 94 Install CV pane (1) for OPEN-V
The Install CV pane (1) has the following features:
• Parity Group: Selected free space’s VDEV number. The VDEV number indicates the parity group where
the VDEV belongs. For example, if VDEV number 1-1-(1) appears, the VDEV belongs to parity group
number 1-1.
NOTE: If a VDEV number starts with E (for example, E1-1-(1)), the VDEV belongs to a parity group
that consists of one or more external LUs.
NOTE: If a VDEV number starts with V (for example, V1-1-(1)), the VDEV belongs to a parity
group that consists of one or more virtual volumes (V-VOLs).
• Emulation: CVS volume’s emulation type (OPEN-V).
• LDEV information table: Displays the following information about the CVS volume settings:
• No.: CVS volume’s setting number.
• Emulation: CVS volume’s emulation type (OPEN-V).
• Capacity: CVS volume’s capacity displayed in the unit selected from the Capacity Unit list.
• available LDEVs: Number of LDEVs that can be created in the VDEV. The maximum is 512 LDEVs for
RAID5 (7D+1P) or RAID6 (6D+2P), and 256 LDEVs for other RAID levels.
• Capacity Unit: Unit the CVS volume’s capacity is displayed in.
• MB: Megabytes (MB). This unit is used for specifying the capacity of open-system volumes.
• Cyl: Cylinders (Cyl). This unit is used for specifying the capacity of mainframe volumes.
NOTE: This unit can also be used for specifying the capacity of OPEN-V volumes.
• Block: Blocks. This unit is used for specifying the capacity of external LUs. For more information
about external LUs, see the HP StorageWorks External Storage XP user guide.