HP StorageWorks XP Remote Web Console Software - Manual (Page 152)

152 Volume Manager operations
To cancel the Volume Manager operation, click Cancel. The previous pane appears, and you can
retry the operation.
b. If the Set LUSE Confirmation pane appears, go to step 5 .
5. To create the LUSE, click OK. The selected top LDEV appears (in blue bold italics) as a LUSE volume in
the LDEV Information table.
NOTE: You can reset LUSE volumes that have been created but not yet registered to the array
(those in blue bold italics) to the state they were in before they were created (see ” Resetting
unregistered LUSE volumes ” on page 154).
6. Click Apply.
7. Click OK (or Cancel). Settings for this Volume Manager operation are registered for the array.
Creating LUSE volumes using the Select an LDEV list
CAUTION: Creating a LUSE volume destroys existing data. To protect the data, make a backup copy of
the existing data before starting the LUSE creation operation.
1. In the Volume Manager pane, select a CU number in the LDEV Information tree.
2. In the Select an LDEV list, select the first LDEV for the LUSE from the Free LDEVs table that displays
available LDEVs.
3. Select one or more additional normal LDEVs, CVS volumes, or LUSE volumes for the LUSE volume.
Click Add to move selected LDEVs from the Free LDEVs table to the Expanded LDEVs list.
4. To delete an LDEV from the Expanded LDEVs list and move it back to the Free LDEVs table, select one
or more volumes, and click Delete.
5. Click Set.
A pane appears. If the displayed pane asks whether you want to perform a Volume Manager
operation on a volume that has a path definition (see Figure 87 ), follow step 5a . If the displayed pane
asks whether you want to perform an Volume Manager operation that affects more than one SLPR or
CLPR, follow step 5b . If the Set LUSE Confirmation pane appears, follow step 5c .
a. To perform a Volume Manager operation on a volume that has a path definition (see Figure 87 ),
click OK. If a message appears asking whether you want to perform a Volume Manager operation
that affects more than one SLPR or CLPR, go to step 5b . If such a message does not appear, go to
step 6 .
If you do not want to perform a Volume Manager operation on a volume that has a path definition,
click Cancel. The previous pane appears, and you can retry the operation.
b. To perform a Volume Manager operation that affects more than one SLPR or CLPR, click OK. A
confirmation pane appears. Go to step 6 .
If you do not want to perform a Volume Manager operation that affects more than one SLPR or
CLPR, click Cancel. The previous pane appears, and you can retry the operation.
c. If the Set LUSE Confirmation pane appears, go to step 6 .
6. Click OK (or Cancel).
NOTE: New settings appear on the pane in blue bold italics are not yet registered to the array.
You cannot reset LUSE volumes that have been created but not yet registered to the array (those in
blue bold italics) to the state they were in before they were created (see ” Resetting unregistered
LUSE volumes ” on page 154).
7. Click Apply (or Cancel).
8. Click OK.