HP StorageWorks XP Remote Web Console Software - Manual (Page 57)

NOTE: 1. Some switch vendors require an F port (for example, McData ED5000).
2. To set ports, use LUN Manager and set the port topology to:
NL port: Fabric on, FC-AL
N port: Fabric on, Point-to-Point
Figure 14 Interface Extender Connection
* To set ports, use LUN Manager and set the port topology to:
NL/FL port: Fabric on, FC-AL
F port: Fabric on, Point-to-Point
Adding or removing cache or shared memory
When pair status of TC (synchronous/asynchronous/HAM) is COPY, neither cache nor shared
memory can be added to or removed from the storage system. When either of these tasks is to be
performed, first split any pairs in COPY status, then resynchronize when the cache or shared
memory operation is completed.
Enabling XP Continuous Access Options
You must enable the XP Continuous Access option(s) (Asynchronous and/or Synchronous) on the
storage systems using the Remote Web Console software. Each XP Continuous Access option
requires a separate license key code, and each storage system requires its own separate set of
license key codes.
For instructions on using the Remote Web Console software and enabling the XP Continuous Access
option(s), see the HP StorageWorks XP24000/XP20000 Remote Web Console User Guide.
When you use Remote Web Console on UNIX workstations or in other non-Windows environments,
certain additional operating conventions must be followed. For details, see the HP StorageWorks
XP24000/XP20000 Remote Web Console User Guide.
Disabling XP Continuous Access
For information on disabling the XP Continuous Access options, see the HP StorageWorks
XP24000/XP20000 Remote Web Console User Guide.
CAUTION: Before disabling an XP Continuous Access option, you must release all affected pairs
and MCU-RCU paths. See “Discontinuing XP Continuous Access Operations” (page 118) for
instructions.
Configuring the MCUs and RCUs for XP Continuous Access Operations
After you have installed the XP Continuous Access hardware and software, you can configure the
MCUs and RCUs for XP Continuous Access operations.
Enabling XP Continuous Access Options 57