Viewing consistency group status – HP StorageWorks XP Remote Web Console Software User Manual
Page 107
To change the group options for one or more groups:
1.
Make sure that all pairs in the group(s) have been split (Pairsplit-r), so that you can change
the group options. See
“Splitting XP Continuous Access Pairs” (page 133)
for instructions on
splitting pairs.
2.
Select the LDKC where the desired consistency group belongs, or select Used from the tree in
the Asynchronous Operation tab to display the existing consistency groups in the list.
3.
Select the consistency group(s) for which you want to change the options. You can only select
groups for which the connected storage system is the MCU (This CU Type = MCU).
4.
Right-click the selected group(s), click CT Group Operation, and then click CT Group Option
to open the CT Group Option dialog box (see
“CT Group Option Dialog Box” (page 106)
). If
the CT Group Option command is not enabled, you need to split the remaining pairs in this
group.
5.
On the CT Group Option dialog box, select the desired group options. For further information
on the consistency group options, see above and
. You can only
change the path type when the group does not contain any pairs.
6.
Click Set to close the CT Group Option dialog box. (Click Cancel to cancel the group option
operation.) The preview list displays the requested change group option operation(s).
7.
Verify the requested operation(s) displayed in the preview list.
To change the group option operation(s), select the operation(s) from the preview list, right-click,
and click Modify. To remove one or more operations, select the operation(s) from the preview
list, right-click, and click Delete. To cancel all operations, select all the operations in the preview
list, right-click, and click the Delete command, or click the Cancel button.
8.
To apply the settings, click the Apply button.
9.
When you are finished changing the CT group options, you can resynchronize (resync) all
pairs in the group(s) (Pairresync).
Viewing Consistency Group Status
The CT Group Status dialog box (see
) displays the detailed status information
for the selected XP Continuous Access Asynchronous consistency group.
To view the detailed consistency group status information:
1.
Select the LDKC where the desired consistency group belongs, or select Used from the tree in
the Asynchronous Operation tab to display the existing consistency groups in the list.
2.
Select the desired CT group from the list. You may view status for only one CT group at a
time.
3.
Right-click the group, click CT Group Operation, and then click CT Group Status to open the
CT Group Status dialog box.
Asynchronous Operations 107