HP StorageWorks XP Remote Web Console Software - Manual (Page 78)

The Asynchronous Operation window displays:
Description Item
Allows you to display all consistency groups (except groups
that are used for XP Continuous Access) belonging to
LDKC#00 (default) or all consistency groups (except groups
that are used for XP Continuous Access) belonging to
LDKC#01. For each LDKC, this tree displays the consistency
groups that are already in use (Used) and the consistency
groups that are available for use (Not Used).
LDKC#01 is not available for the current microcode version.
Tree
Displays the following consistency group information:
•
CTG: Consistency group number.
•
This CU: The CU to which the group is registered. MCU:
The group was added from the connected CU. RCU:
The group was added from the paired CU (connected
CU is an RCU). M&R: The MCU and RCU are in the
same storage system.
•
M-R Path: Channel type: fibre. If the consistency group
is not in use, this column is blank.
•
Offloading Timer: The time between XP Continuous
Access Asynchronous recordset transfers. If the
consistency group is not in use, this column is blank. If
this CU is an RCU, this parameter is invalid and a
hyphen is displayed in this column.
•
Inflow Control: Indicates whether the inflow control is
enabled or not. If the consistency group is not in use,
this column is blank. If this CU is an RCU, this parameter
is invalid and a hyphen is displayed in this column.
•
Paired S/N: Serial number of the paired storage system
(if there is more than one RCU, the storage system with
the lowest S/N is displayed). The LDKC number is also
displayed next to the S/N. If the consistency group is
not in use, this column is blank.
•
Paired ID: SSID (if there is more than one RCU, the
storage system with the lowest SSID is displayed) or
path group ID of the paired storage system. If the
consistency group is not in use, this column is blank.
•
Other S/N: Exist: Indicates that there is more than one
RCU for the group. If there is only one RCU, this column
is blank.
List
The number and name of the CLPR to which the volumes
forming pairs belong. If the consistency group is not in use,
this column is blank. For further information on CLPRs, see
the HP StorageWorks XP24000/XP20000 Disk/Cache
Partition User's Guide. CLPR
Indicates the current operation performed on the
Asynchronous Operation window. Operation
Indicates the number of rows in the preview list. Preview
Usage Monitor Window
The Usage Monitor window (see Figure 29 (page 79) ) displays the remote copy I/O statistics for
all LDEVs to be monitored on the connected storage system, displays the status of remote copy
usage monitoring, and allows you to perform the XP Continuous Access usage monitor operations
(see
“Usage Monitor Operations” (page 109) ).
78 Using the XP Continuous Access GUI