HP StorageWorks XP Remote Web Console Software User Manual
Page 116
Figure 45 Option Settings List for the CUs
•
CU: Number of CUs in the LDKC that you chose from the tree (00 to FE).
•
Activities: Number of volumes in concurrent initial copy operations (1 to 16). When you set
Disable for the Maximum Initial Copy Activities(CU) option on the System Option dialog box,
Disable is shown instead of a number.
To change the option settings of the CU:
NOTE:
To specify the CU option in XP Continuous Access, set the Maximum Initial Copy Activities
(CU) to Enable in the System Option dialog box in advance (see
).
1.
Click the System Option tab, and then select CU Option for the LDKC containing the desired
CU from the tree.
2.
Select one or more CUs from the list, and right-click to display the menu.
3.
Click CU Option.
The CU Option dialog box will be displayed (see
“CU Option Dialog Box” (page 117)
).
4.
In the CU Option dialog box, change the CU options.
5.
When the CU Option dialog box opens, the current settings are displayed. If you specified
two or more CUs and the option settings for the CUs are different, the entry box on the CU
Option dialog box is blank.
If you specify multiple CUs, the same setting will be applied to all the specified CUs.
6.
Click Set to button to close the CU Option dialog box. The preview list displays the updated
information.
To cancel the change(s), click the Cancel button.
7.
Verify the change(s) in the preview list.
•
To change the settings, right-click the preview list, click Modify, make the desired changes,
and close the dialog box. The preview list displays the updated information.
•
To omit the settings, right-click the preview list, and click Delete. The changes are canceled.
8.
To apply the settings, click Apply.
To cancel all the changes, click the Cancel button.
If an error occurs in the setting, an error code is displayed in the Error Code column in the
preview list. To display the error message, right-click on the list, display the menu, and click
Error Detail. After you check the error message(s), click the OK to close the error message. If
necessary, respond to remove the cause of the error message.
116
Performing XP Continuous Access Configuration Operations