HP StorageWorks XP Remote Web Console Software User Manual
Page 66
CF CHP(channel-pass1 - channel-pass2),ONLINE
V base-device-number1 - base-device-number2,ONLINE
•
Data Exchange is used on the host computer.
After performing the installation of Compatible Hyper PAV as mentioned above, issue
the following commands.
V Data-Exchange-volume-number1 - Data-Exchange-volume-number2, OFFLINE
V Data-Exchange-volume-number1 - Data-Exchange-volume-number2, ONLINE
Using Compatible Hyper PAV from z/OS Used as a Guest OS on z/VM
To install Compatible Hyper PAV if you use Compatible Hyper PAV from z/OS that is used as a
guest OS on z/VM:
1.
Upgrade the host software to support Hyper PAV.
z/VM: z/VM 5.3 or later
z/OS (guest OS): 1.8 or later, or z/OS 1.6 with PTF or later
2.
If you have used the storage system already, upgrade the microcode version supporting
Compatible Hyper PAV (60 03 2x or later). If you need to upgrade the storage system, contact
HP technical support.
3.
Install the Compatible PAV software.
4.
Install the Compatible Hyper PAV software.
5.
Assign aliases.
If your installation is a new storage system, and you have already assigned aliases to the
base volumes for Compatible Hyper PAV, skip this step.
6.
On z/VM, enable Hyper PAV.
7.
On z/OS that is used as a guest OS on z/VM, enable Hyper PAV.
8.
Issue the QUERY PAV command from z/VM, and make sure that the displayed aliases are
those assigned for Compatible Hyper PAV.
66
Using Compatible Hyper PAV