HP StorageWorks XP Remote Web Console Software - Manual (Page 27)

If all 255 CUs have volumes, it can take up to 13 hours to calculate and display the updated used
capacity. During calculation, the latest value for the used capacity is unavailable.
Even if the calculation of the used capacity has not been completed, the changes had been enabled
already. All volumes defined to XP24000/XP20000 disk arrays are calculated. The value displayed
during calculation and enclosed in brackets is temporary. After the calculation has finished, the
brackets disappear and the latest value of the used capacity is displayed.
Base Volume List
The Base Volume List box (see Figure 13 (page 27) ) displays the LDEVs that are currently in use
in the selected CU image. Each of these LDEVs can be a Compatible PAV base device. When you
assign and cancel aliases for base devices, you select the base devices from this list box.
Figure 13 Base Volume List
Table 5 (page 27) describes the items in the Base Volume List box.
Table 5 Base Volume List
Description Item
Displays the LDKC number, CU number, and LDEV number of the base volume. For the
volume used for Compatible PAV, an asterisk (*) is attached next to the LDEV number
(for example, 00:00:00 *). The capacity of the volumes attached asterisks (*) is an object
for calculation of used capacity. Base Volume
Displays the number of aliases currently assigned to the base volume in the storage
system. The number of aliases set in the base volume by the user is also displayed in the
parentheses. Alias Count (Initial)
Displays the number of selected base volumes and the total number of base volumes in
the selected CU image. For example, 2/73 indicates that two base volumes are selected
out of a total of 73 base volumes in the select CU image. Selected
Select all volumes in the Base Volume List box. Select All
Using the Compatible PAV window 27