B checking the wlm pav settings – HP StorageWorks XP Remote Web Console Software User Manual
Page 63
Advertising
B Checking the WLM PAV Settings
To view or change the Workload Manager PAV settings:
1.
On the WLM initial dialog box (see
), press Enter to continue.
2.
The Service Definition dialog box (see
) allows you to define where the
service coefficient information can be found. Select option 1 (Read saved definition).
3.
On the Primary Options dialog box (see
), select option 8 (Service
Coefficients/Options) to display the WLM PAV settings.
4.
The Service Coefficient/Service Definition Options dialog box (see
) is
used to set PAV Dynamic Alias Management.
Figure 60 WLM Initial Dialog Box
Figure 61 WLM Choose Service Definition Dialog Box
63
Advertising