HP XP External Storage Software - Manual (Page 134)

A Connecting External Storage Systems
This appendix provides configuration information for connecting various external storage systems
to the HP XP24000/XP20000 storage systems.
AMS/WMS Storage System
System Parameters
Table 34 (page 134) explains whether to specify system parameters when making settings on ports
on the AMS and WMS storage systems. You can either specify or omit any other parameters.
When connecting an AMS or WMS storage system, use Remote Web Console Modular or Remote
Web Console Modular 2 to set the data transfer speed of the external port to a fixed value other
than Auto. Also, set the data transfer speed of the target port of the AMS or WMS storage system
to a fixed value according to the data transfer speed of the external port.
Table 34 System Parameters (AMS/WMS)
Parameter Settings Parameters Window Names
Start Attribute Boot Options
Specify this parameter when the TagmaStore
AMS storage system or TagmaStore WMS
storage system is in the one controller
configuration. Single Mode
Specify this parameter when the TagmaStore
AMS storage system or TagmaStore WMS
storage system is in the two controller
configuration. Dual Active Mode
You can either specify or omit specifying this
parameter. Delay Planned Shutdown
You can either specify or omit specifying this
parameter. Drive blocking mode
Keep the default parameter and do not change. Vendor ID
Keep the default parameter and do not change. Product ID
You can either specify or omit specifying this
parameter. ROM Microcode Version
You can either specify or omit specifying this
parameter. RAM Microcode Version
You can either specify or omit specifying this
parameter. Option System Parameter
Specify this parameter to Reset of occurred. Operation if the processor failure
occurs
You can either specify or omit specifying this
parameter. WEB Title
Set this parameter to ON for AMS 1000, AMS
500, AMS 200, and WMS 100.
Set this parameter to OFF for AMS 2500, AMS
2300 and AMS 2100.
Write and verify mode
You can either specify or omit specifying this
parameter. Port Option Port Options
134 Connecting External Storage Systems