HP XP External Storage Software - Manual (Page 49)

Volume Operation Tree
The Volume Operation tree, on the left side of the Volume Operation window, contains the following:
Description Item
Changes the items displayed in the Volume Operation tree.
You can select Fibre as a PCB type. List
The following items appear in tree format. The information
displayed in the list on the right changes corresponding to
the items clicked in this tree.
• Subsystem: The root node of the Volume Operation tree
that is always displayed.
•
Product name of the external volume: The product name
of the external storage system whose volumes are
mapped by XP External Storage appears under
Subsystem. The display format is
Vendor name:
Product name (Serial number) .
• Path group: The path group set in the external storage
system appears under the product name of the external
storage system. When multiple path groups are set, the
registration numbers are added after the Path Group
(For example, Path Group 2).
Tree
Right-click the item in the Volume Operation tree to perform
the operations from the pop-up menu. For details, see
Table 5 (page 49) .
Pop-up menu
Table 5 Pop-up Menu for the Volume Operation Tree
Description Reference Pop-up Menu Items displayed in the tree
(Clicked items are
underlined)
Displays the Configure
Cross-subsystem Paths dialog
box or the Add Volume
(Manual) dialog box. These
dialog boxes allow you to
set a new path group, and
add external volumes to the
new path group. “Mapping an External
Volume Automatically”
(page 67)
“Mapping an External
Volume Manually”
(page 68)
Add Volume (Auto)
Add Volume (Manual)
Subsystem
+ Product name
+ Path group
Displays the Edit Policy
dialog box. This dialog box
allows you to edit the
mapping policy. “Editing Mapping Policy”
(page 98) Edit Policy
Volume Operation Window 49