HP XP External Storage Software - Manual (Page 58)

Path Operation Tree
The Path Operation tree, on the left side of the Path Operation window, contains the following:
Description Item
Changes the items displayed in the Path Operation tree.
You can select which side to display the information on
cross-subsystem paths from.
Fibre - Local Subsystem: Displays ports in the local storage
system.
Fibre - External Subsystem: Displays ports (WWNs) in the
external storage system.
List
The following items appear in tree format. The information
displayed in the list on the right changes corresponding to
the items clicked in this tree.
When you select Fibre - Local Subsystem from the list, the
following items appear in the tree:
•
Subsystem: The root node of the Path Operation tree
that is always displayed.
• Port number: The port number of the local storage
system, for which the port attribute is set to External,
appears under Subsystem. One of the following icons
appears:
: Ports in the Standard mode.
: Ports in the Initiator/External MIX mode.
When you select Fibre - External Subsystem from the list,
the following items appear in the tree:
•
Product name of the external volume: The product name
of the external storage system that is connected by XP
External Storage appears as a root node. The display
format is
Vendor name: Product name (Serial
number) .
• WWN: The WWNs of the external storage system
appear under the product name of the external storage
system.
Tree
Path Operation List (When Subsystem is Clicked)
When you click Subsystem in the Path Operation tree, the external port information that is set to
the local storage system appears in the list on the right.
58 Using the XP External Storage GUI