HP XP External Storage Software - Manual (Page 107)

Table 20 AddVolumeSetting Tag Parameters
Number of
Characters Range of Values Setting Parameter Column in
Spreadsheet
Layer
Information about external volumes and the primary path First layer
5 decimal digits or
fewer 0 to 63231 Path group
number PathGroup A
2 digits or fewer 1A to GR Port number of
the primary path Port B
16 hexadecimal
digits 000000000000000
to
FFFFFFFFFFFFFFFF
WWN of the
primary path WWN C
4 hexadecimal
digits or fewer 0000 to 0FFF LU number set to
the external
volume LUN D
Grp: 5 decimal
digits or fewer
VPG: 4 decimal
digits or fewer
Grp: 1 to 16384
VPG: 1 to 4096
External volume
group number
and its sequential
number. The
format should be
EGrp-VPG (for
example,
E16384-4096). ExG E
N/A •
Normal
• R-CMD
•
Normal:
Maps an
external
volume
• R-CMD: Maps
a command
device
Attribute F
2 decimal digits or
fewer 0 to 31 CLPR that is used
to access the
external volume CLPR G
16 characters or
fewer in ASCII
format N/A Emulation type of
the external
volume. Write the
same characters
as the emulation
type shown in
“LDEV Capacity
Information for
Each Emulation
Type” (page 154)
.
Emulation H
N/A •
Enable
• Disable
•
Enable: Sets
cache mode
to Enable.
• Disable: Sets
cache mode
to Disable.
CacheMode I
N/A •
Enable
• Disable
•
Enable: Sets
inflow control
to Enable.
• Disable: Sets
inflow control
to Disable.
InflowControl J
Mapping External Volumes 107