HP XP External Storage Software - Manual (Page 86)

emulation type of the mapped external volume is for the mainframe system, the capacity
is shown in Cylinder.
•
Close button
Closes the LDEV Information dialog box.
Mapping Path Information Dialog Box
The Mapping Path Information dialog box shows the information on the mapping paths that connect
the internal volume and the external volume.
Figure 36 Mapping Path Information Dialog Box
The Mapping Path Information dialog box consists of:
•
List
Priority: Priority of the mapping path. 1 indicates the mapping path with the highest
priority. ◦
◦ Port: The port number in the local storage system connecting to the external storage
system.
◦ WWN: Identification number of the port in the external storage system.
◦ LUN: LU number set to the external volume.
◦ Status: Status of the mapping path. Table 12 (page 86) lists and describes the status
terms that are displayed on the Mapping Path Information dialog box. For required actions
for each path status, see
“Mapping Path Statuses and Required Actions” (page 127) .
•
Close button
Closes the Mapping Path Information dialog box.
•
Pop-up menu
The Mapping Path Information dialog box does not have a pop-up menu that can be displayed.
Table 12 Status of the Mapping Paths in the Mapping Path Information Dialog Box
Description Displayed Item
The mapping path is normal. Normal
The status of the mapping path is not retrieved yet. Click Status:Disable and
change the button name to Status: Enable in the Volume Operation window to
display the status of the mapping path. -
The status of the mapping path is unknown. Unknown
The mapping path is blocked. Blockade
86 Performing XP External Storage Operations