HP XP External Storage Software User Manual

Page 139

Advertising
background image

Table 39 System Parameters (Thunder 9500V)

Parameter Settings

Parameters

Window Names

Start Attribute

System Startup Settings

Specify this parameter when the Thunder
9500V storage system is in the one
controller configuration.

Single Mode

Specify this parameter when the Thunder
9500V storage system is in the two
controller configuration.

NOTE:

Be sure to specify that Data Share

Mode will be used.

Dual Active Mode

Do not specify this parameter.

Hot Stand-By Mode

You can either specify this parameter or
omit specifying this parameter.

Delay Planned Shutdown

Common 1

You can either specify this parameter or
omit specifying this parameter.

SCSI Fibre Channel Common Options

OPTION 1

You can either specify this parameter or
omit specifying this parameter.

SCSI Fibre Channel Common Options

OPTION 2

Specify this parameter to Reset of occurred.

Operation if the processor failure
occurs

Data Striping

Specify this parameter ON.

Command Queuing Mode

Inquiry Setting

Keep the default parameter and do not
change.

Vendor ID

Keep the default parameter and do not
change.

Product ID

You can either specify this parameter or
omit specifying this parameter.

ROM Microcode Version

You can either specify this parameter or
omit specifying this parameter.

RAM Microcode Version

You can either specify this parameter or
omit specifying this parameter.

WEB Title

Reset/LIP Mode

Port Type

You can either specify this parameter or
omit specifying this parameter.

Reset/LIP Mode (Signal)

You can either specify this parameter or
omit specifying this parameter.

Reset/LIP Mode (Process)

You can either specify this parameter or
omit specifying this parameter.

LIP Reset Mode

You can either specify this parameter or
omit specifying this parameter.

RS232C Error Information Outflow
Mode

Controller Option

Set this parameter to ON.

Write and verify mode

Set this parameter to Standard Mode.

Host Connection Mode 1

Host Connection Mode

Specify HISUP Mode.

NOTE:

Do not specify any other

parameters.

Host Connection Mode 2

Thunder 9500V Storage System

139

Advertising
This manual is related to the following products: