HP XP External Storage Software - Manual (Page 59)

Description Item
The external port of the local storage system. One of the
following icons appears:
: Ports in the Standard mode.
: Ports in the Initiator/External MIX mode.
Port
The wait time (in seconds) of PLOGI to the external storage
system when the switch is not connected. This value is
automatically set by XP External Storage. You cannot
change the value. PLI_TOV
The wait time (in seconds) from the switch to FLOGI when
the switch is connected. This value is automatically set by
XP External Storage. You cannot change the value. FLI_TOV
The additional wait time (in seconds) to FLI_TOV (FLOGI
wait time) or PLI_TOV (PLOGI wait time). This value is
automatically set by XP External Storage. You cannot
change the value. As a result, the sum of FLI_TOV time and
the margin time, or the sum of PLI_TOV time and the margin
time is set as a total wait time. Margin
Status of the cross-subsystem path. Table 9 (page 59) shows
the displayed statuses.
Status
Right-click a row in the list to perform the operations:
•
Disconnect Paths: Allows you to stop the use of the
cross-subsystem paths that are connected to the selected
external port of the local storage system. See
“Stopping
the Use of Paths to the External Volume (Disconnect
Paths)” (page 94)
.
•
Check Paths: Allows you to resume using the
cross-subsystem paths that are connected to the selected
external port of the local storage system. See
“Restoring
the Paths to the External Volume (Check Paths)”
(page 95)
.
Pop-up menu
Table 9 Status of the Cross-subsystem Path Displayed in the Status
Description Displayed Item
The cross-subsystem path is normal. Normal
The status of the cross-subsystem path is not retrieved yet.
Click Status in the Path Operation window to change the
name of the button to Status: Enable, and display the status
of the cross-subsystem path. -
The status of the cross-subsystem path is unknown. Unknown
The cross-subsystem path is blocked. Blockade
Path Operation Window 59