HP XP External Storage Software - Manual (Page 112)

Table 21 AddVolumeSetting2 Tag Parameters
Number of
Characters
Range of
Values
Setting Parameter Column in
Spreadsheet
Layer
Information about external volumes and the primary path First layer
5 decimal digits or
fewer 0 to 63231 Path group
number PathGroup A
2 digits or fewer 1A to GR Port number of
the primary path Port B
16 hexadecimal
digits 00000000
00000000 to
FFFFFFFF FFFFFFFF WWN of the
primary path WWN C
4 hexadecimal
digits or fewer 0000 to 0FFF LU number set to
the external
volume LUN D
Grp: 5 decimal
digits or fewer
VPG: 4 decimal
digits or fewer
Grp: 1 to 16384
VPG: 1 to 4096
External volume
group number
and its sequential
number. The
format should be
EGrp-VPG (for
example,
E16384-4096). ExG E
N/A •
Normal
•
R-CMD
•
Normal:
Maps an
external
volume
•
R-CMD: Maps
a command
device
Attribute F
2 decimal digits or
fewer 0 to 31 CLPR that is used
to access the
external volume CLPR G
Information about alternate paths. Specify the paths in the
order of descending priorities. Second layer
N/A N/A Identifier + A
2 digits or fewer 1A to GR Port number of
the alternate path Port B
16 hexadecimal
digits 00000000
00000000 to
FFFFFFFF FFFFFFFF WWN of the
alternate path WWN C
Information about LDEVs to be created in an external
volume Third layer
112 Using Spreadsheets for XP External Storage Operations