Deleting xp snapshot pairs – HP StorageWorks XP Remote Web Console Software User Manual

Page 89

Advertising
background image

XP Snapshot does not support Quick Resync mode. If you specify Quick Resync mode, snapshot
data will not be deleted even if the command ends normally. Therefore, even if you specify Quick
Resync mode, Quick Resync mode does not take effect.

Deleting XP Snapshot Pairs

Use the command of the RAID Manager or the Pairsplit-S dialog box to delete XP Snapshot pairs.

If you use the RAID Manager to delete XP Snapshot pairs, you need to use the pairsplit -S
command. By using this command, you can delete only one pair at a time. For details about the
pairsplit -S

command, see the HP StorageWorks XP RAID Manager User Guide.

If you use the Pairsplit-S dialog box, you can delete multiple pairs at the same time. You can open
the Pairsplit-S dialog box either from XP Business Copy's Pair Operation window or the XP Snapshot
window. To select the pairs to be deleted by the port or host group, open the Pairsplit-S dialog
box from the Pair Operation window. To select the pairs by pool, open the Pairsplit-S dialog box
from the XP Snapshot window.

Deleting XP Snapshot Pairs by Selecting the Pairs per Port

To delete XP Snapshot pairs by selecting the pairs per port:

1.

Change the mode of the Remote Web Console to Modify. If the mode is already changed to
Modify, you can skip this step. For information on how to change the mode, see the HP
StorageWorks XP24000/XP20000 Remote Web Console User Guide
.

2.

Display the Pair Operation window.

3.

In the tree, select the port or host group that contains the XP Snapshot pairs you want to delete.
The list of the pairs or volumes is displayed in the volume list.

4.

Select and right-click the XP Snapshot pairs you want to delete. A menu is displayed.

You cannot delete an XP Business Copy pair and an XP Snapshot pair at the same time.

5.

Select the Pairsplit-S command from the menu. The Pairsplit-S dialog box (

“Pairsplit-S

Dialog Box” (page 90)

) is displayed.

6.

Click OK. The Pairsplit-S dialog box closes and a list of the XP Snapshot pairs that you are
going to delete is displayed in the Preview list of the Pair Operation window.

7.

Click Apply. The confirmation message indicating if it is OK to apply the setting to the storage
system is displayed.

8.

Click OK. The confirmation message closes and the deletion of the pair is applied to the
storage system.

Deleting XP Snapshot Pairs

89

Advertising
This manual is related to the following products: