HP StorageWorks XP Remote Web Console Software - Manual (Page 111)

Table 33 Cause of Error and the Result of RAID Manager Command (SSB) (continued)
Cause of Error RAID Manager Command SSB2 SSB1
The XP Snapshot pair cannot
be created for any of the
following reasons:
•
The shared memory is not
increased.
• Initialization is in
process.
Unavailable parameter
(unsupported parameter) is
specified in the command. paircreate 976a
Since the command was
executed with the PSUE
option, the snapshot data
cannot be stored. pairsplit 976c
When an XP Snapshot P-VOL
and XP Continuous Access
S-VOL share the volume, the
status of the XP Continuous
Access pair is COPY.
Therefore, the snapshot data
cannot be stored. pairsplit 976e
When XP Snapshot P-VOL
and XP Continuous Access
Journal S-VOL share the
volume, the status of the XP
Continuous Access Journal
pair is COPY. Therefore, the
snapshot data cannot be
stored. pairsplit 976f
Since you specified XP
Continuous Access Journal
delta resync pair volume as
the XP Snapshot P-VOL, the
XP Snapshot pair cannot be
created. paircreate 9771
Since you specified XP
Continuous Access Journal
delta resync pair volume as
the XP Snapshot S-VOL, the
XP Snapshot pair cannot be
created. paircreate 9772
When the XP Snapshot
P-VOL and XP Business Copy
P-VOL share the volume, the
MU number you specified
for the XP Snapshot pair is
already used by the XP
Business Copy pair.
Therefore, the XP Snapshot
pair cannot be created. paircreate 9774
paircreate 9776
Troubleshooting When Using XP RAID Manager 111