HP StorageWorks XP Remote Web Console Software - Manual (Page 149)

LUN Configuration and Security Manager XP user guide for the XP12000/XP10000/SVS200 149
Reset LUSE Confirmation pane
When you select Reset LUSE Volume from the Volume Manager operation shortcut menu, the following
pane appears. You can confirm the LDEV that is still not registered to the array as a LUSE volume and
whether or not you want to reset this unregistered LUSE volume to the state it was in before it was created.
Figure 90 Reset LUSE Confirmation pane
• Unregistered LUSE volume list
Displays LDEVs created into a LUSE volume but not yet registered to the array that you can reset to the
state they were in before they were created.
• LDEV: LDEV icon, CU number, and LDEV number.
NOTE: If an LDEV number ends with # (for example, 00:01#), the LDEV is an external LU. For
more information about external LUs, see the HP StorageWorks External Storage XP user guide.
NOTE: If an LDEV number ends with V (for example, 00:01V), the LDEV is a virtual volume
(V-VOL). For more information about V-VOLs, see the HP StorageWorks Snapshot XP user guide.
• Emulation: LDEV’s emulation type.
• Capacity: LDEV’s capacity.
• OK: Resets the unregistered LUSE volume to the state it was in before it was created.
• Cancel: Cancels the reset LUSE operation.
Concatenation List pane
In the array, data can be written to an LDEV that extends over concatenated parity groups. Concatenation
of parity groups enables faster access to data.