HP StorageWorks XP Remote Web Console Software - Manual (Page 67)

ShadowImage for z/OS user guide 67
To open the CT Group Status window, select a consistency group in the CTG List box, right-click, and then
select the CTG Status command.
Figure 34 CT Group Status window
The CT Group Status window contains the following items:
• Use the CTG list to select a consistency group and display information about it in the Pair list box.
• The Pair List box displays the following registered pair-related information of the consistency group
selected in the CTG list:
• Source Vol: The source volume (S-VOL). The left of the colon (:) shows the CU image. The right of the
colon (:) shows the ID of the logical device (LDEV).
• Status: The status of the pair.
• Target Vol: The target volume (T-VOL). The left of the colon (:) shows the CU image. The right of the
colon (:) shows the ID of the logical device (LDEV).
• Progress: The rate of copying in progress.
• Emulation: The emulation type.
• CYL: The number of volume cylinders.
• CLPR (S): The S-VOL’s cache logical partition.
• CLPR (T): The T-VOL’s cache logical partition.
• The OK button closes the CT Group Status window.
Setting the Reserve Attribute of a Consistency Group
Use the Add CTG command to set the reserve attribute of one or more consistency groups selected in the
CTG List box.
To set the reserve attribute of one or more consistency groups:
1. From the CTG window, click the CTG Status or CTG in the Tree View box. Confirm that the information
of the consistency group that you have just selected is displayed in the CTG List box.
2. Select the consistency group that you want to set the reserve attribute, right-click to display the pop-up
menu, and then click Add CTG.
3. Repeat the previous steps for each consistency group you want to set.
4. From the CTG window, click Apply to set the reserve attribute.