Figure 31 options window, To set an si390 option, Ctg window – HP StorageWorks XP Remote Web Console Software User Manual
Page 64: 31 options window
64
ShadowImage for the XP128/XP1024/XP10000/XP12000
To display the Options window, click the Options tab. From the Options window, select and/or clear the
check boxes to set options.
Figure 31
Options window
The Select Option(s) box displays the check boxes of the SI390 options. For more information about the
supported options, refer to ”
To set an SI390 option:
1.
From ShadowImage, click the Options tab to display the Options window. When the Options window
is opened, it shows the current status of the option.
2.
Select the check box next to each option you want to set. If you do not want to set any of the options,
clear all of the check boxes in the Select Option(s) box.
3.
Select Apply. You can now perform an SI390 operation with the specified option.
CTG Window
The CTG window displays the information about the selected consistency groups of the connected XP disk
array. A consistency group (CTG or CT Group) is a set of volume pairs defined by the host command.
NOTE:
The CTG tab and its features are available only if the XP disk array has firmware version 21.07.04
or later installed.