Figure 28 suspend volume pair window, To suspend one or more si390 pairs, Deleting shadowimage pairs – HP StorageWorks XP Remote Web Console Software User Manual
Page 60: 28 suspend volume pair window
60
ShadowImage for the XP128/XP1024/XP10000/XP12000
NOTE:
The CSUSPEND/PPRCOPY SUSPEND commands execute an SI390 split operation. There is no
TSO/ICKDSF command equivalent for manually suspending pairs. For more information on using PPRC
commands, see ”
Using PPRC Commands for ShadowImage
Figure 28
Suspend Volume Pair window
The Suspend Volume Pair window lists the pair(s) selected on the ShadowImage main window and shows
the pair status and copy pace for each pair. The OK button suspends the selected pair(s). The Cancel
button closes the Suspend Volume Pair window and returns you to the ShadowImage main window.
To suspend one or more SI390 pairs:
1.
From the ShadowImage main window, click the CU image or LDEV in the Tree View box to filter the
volumes displayed in the Volume List box.
2.
Select the pair(s) that you want to suspend (or the volume(s) whose pairs you want to suspend),
right-click to display the pop-up menu, and then click Suspend Pair to open the Suspend Volume Pair
window.
3.
From the Suspend Volume Pair window, click the pair(s) you want to suspend and then click OK to
reflect the settings to the Preset Volume List box on the ShadowImage main window.
NOTE:
To remove pair(s) from the list, select the unneeded pair(s), right-click to display the pop-up
menu, and then click Delete.
4.
to suspend additional pairs in the list.
5.
From the ShadowImage main window, click Apply to suspend the specified pair(s).
The ShadowImage main window now displays the result(s) of the suspend operation(s) (pair status
changed to Suspend).
6.
Click the Refresh button (
) to display the latest information.
Deleting ShadowImage Pairs
In addition to displaying pair information for the pair(s) selected on the ShadowImage main window, you
can use the Delete Volume Pair window to delete the pair(s). To open the Delete Volume Pair window,
select one or more pairs (except Simplex and V-Split pairs) in the Volume List box on the ShadowImage
main window, right-click to display the pop-up menu, and then click Delete Pair.