HP StorageWorks XP Remote Web Console Software - Manual (Page 118)

118 ShadowImage for the XP128/XP1024/XP10000/XP12000
By executing the command described above, the relationship established with the specified target,
Dataset 3, is not withdrawn because the specified extent within the device numbered 4203 is only a
part of Dataset 3.
Figure 66 Example(2) of FCWITHDR Command (TDEVN: specified, DDSW = NO, XTNTLST parameter
specified)
• Case 3: FCWITHDR command (SDEVN and TDEVN: specified, DDSW = NO)
Below is an example of the command description for Case 3. This example requests the withdrawal of
all the relationships established between the device numbered 4202, which in this case is the source,
and the device numbered 4203, which in this case is the target.
Figure 67 Example of FCWITHDR Command Description (for Case 3)
In this case, only the relationships established with Dataset 3 in the device numbered 4203 are
relevant. Therefore, by executing the command described above, the relationship established with
Dataset 3 is withdrawn. Dataset 6 is specified as the copy target extent, but since the dataset specified
as the source, Dataset 5, is not in the device numbered 4202, Dataset 6 is not withdrawn. In short,
FCWITHDR SDEVN(X'4202') TDEVN(X'4203')