HP StorageWorks XP Remote Web Console Software - Manual (Page 121)

ShadowImage for z/OS user guide 121
same content represented by a different description, both requesting the withdrawal of all the
relationships established with the device numbered 4202.
Figure 74 Example of FCWITHDR Command Description (for Case 5)
By executing the command described above, the relations established with Dataset 1 and Dataset 2 in the
device numbered 4202 are withdrawn. As a result, there will no longer be any relationships established
with the device numbered 4202 after executing this command.
Figure 75 Example of FCWITHDR command (SDEVN and TDEVN: specified, DDSW = YES)
• Case 6: FCWITHDR command (SDEVN and TDEVN: specified, DDSW = YES, XTNTLST parameter
specified)
Below are two examples of the command descriptions for Case 6. Both examples request the
withdrawal of all those relationships among the relationships established with the device numbered
4202 that are included in the extent specified by the XTNTLST parameter. When DDSW parameter is
set to YES, the TDEVN parameter values and the XTNLST parameter values for the copy target extent
are ignored. Therefore, the two command descriptions below both bear the same result.
Figure 76 Example of FCWITHDR Command Description (for Case 6)
FCWITHDR SDEVN(X'4202') DDSW(YES)
FCWITHDR SDEVN(X'4202') TDEVN(X'4203') DDSW(YES)
FCWITHDR SDEVN(X'4202') DDSW(YES) XTNTLST(X'010000000' X'1100000E' X'21000000' X'2200000E')
FCWITHDR SDEVN(X'4202') TDEVN(X'4203') DDSW(YES)
XTNTLST(X'010000000' X'1100000E' X'21000000' X'2200000E')