HP StorageWorks XP Remote Web Console Software - Manual (Page 46)

46 ShadowImage for the XP128/XP1024/XP10000/XP12000
NOTE: SI390 supports the CQUERY/PPRCOPY QUERY commands for viewing SI390 pair status. For
more information on using PPRC commands, see ” Using PPRC Commands for ShadowImage ” on page 68.
Figure 19 Detail window
The Detail window has the following features:
The Detail box displays the following:
• Source Vol Information: The source volume ID (CU image:LDEV ID), S-VOL status, and CLPR of the
S-VOL.
• Volume Information: The emulation type and the capacity of the logical device (LDEV).
• The Pair Information box displays the following:
• Source Vol: The source volume (S-VOL). The left of the colon (:) shows the CU image. The right of the
colon (:) shows the ID of the logical device (LDEV).
• Status: The status of the pair.
• Target Vol: The target volume (T-VOL). The left of the colon (:) shows the CU image. The right of the
colon (:) shows the ID of the logical device (LDEV).
• Progress: The rate of copying in progress.
• T-VOL Status: The status of the first path to the T-VOL.
• CLPR: The cache logical partition of the S-VOL and the T-VOL.
• CTG: The registered ID of the consistency group.
• The Refresh button updates the information displayed in the Detail window.
• The OK button closes the Detail window.
The Display Filter Window
Use the Display Filter window to filter the volumes displayed in the Volume List box by reserve attribute, by
pair condition, and by pair status. To open the Display Filter window, click Display Filter on the