HP StorageWorks XP Remote Web Console Software - Manual (Page 23)

External Storage XP user guide 23
• Auto LUN XP (manual mode, only)
Use Auto LUN XP to display monitoring information concerning external volumes. For an example of
using Auto LUN XP with External Storage XP, see ” Using existing data in mapped external LUs ” on
page 20.
• Continuous Access XP (sync and async)
• TrueCopy for z/OS®
• Continuous Access XP Journal
• Universal Replicator for z/OS
• Business Copy XP
For an example of using Business Copy XP with External Storage XP, see ”
Using external LUs for
Business Copy operations ” on page 22.
• ShadowImage for z/OS
• Snapshot XP
You must set the IO Suppression mode to Disable to use the mapped external LU for Snapshot XP
operations.
• Hitachi Parallel Access Volume (HPAV)
• Hitachi SANtinel - S/390
You must set the IO Suppression mode to Disable to use a mapped external LU for Hitachi SANtinel -
S/390 operations.
• Hitachi SANtinel - S/390
• LUN Security XP Extension
• SNMP
Information about the mapped external LU and external port is displayed.
• Configuration File Loader
• Set the path definition for external LUs (add, delete, or change paths)
• Add or delete command devices on external LUs
NOTE: Some mainframe products might be marketed under different HP names and are not supported at
this time. Contact your HP account support representative for the latest support matrix.
Requirements and restrictions
System requirements
• Local disk array (first disk array)
Install and enable all hardware and microcode required for External Storage XP operations in the local
disk array.
NOTE: Currently only an XP10000/XP12000 can be used as a local disk array. XP firmware
50-02-14 (or greater) is required to support the external storage devices. For a list of all external
storage devices that can be used as an external disk array, see ” Storage devices that can be
connected as external disk arrays ” on page 24.
• External disk array (second disk array)
You will also need a second storage device, called the external disk array in this document. For a list of
all external storage devices that can be used as an external disk array, see ” Storage devices that can
be connected as external disk arrays ” on page 24.
• HP StorageWorks Command View XP or XP Remote Web Console for the local disk arrays (running on
a user-supplied Windows®-based PC)