HP StorageWorks XP Remote Web Console Software - Manual (Page 96)

Port Dialog Box
The Port dialog box provides information on ports. The displayed information can be switched using
the SLPR drop-down list or Type drop-down list. The following figure is an example of the Port dialog
box when Fibre is selected by the Type drop-down list.
Figure 39 Port Dialog Box (Reports Display, when Fibre is Selected)
The displayed items on the Port dialog box are as follows:
Description Item
Allows you to display the information on a particular SLPR when you select the SLPR
from the SLPR drop-down list. If you have logged in as a storage partition administrator,
only information about the allocated SLPR is displayed, and you cannot select other
SLPRs in this drop-down list.
SLPR
Select a port type, and only information about the selected port type is displayed on
the Port list. One of the following ports can be selected:
• Fibre: Only information about the fibre ports is displayed.
• Serial: Only information about the serial ports is displayed.
• Mfibre: Only information about the Mfibre ports is displayed.
Type
Using the Remote Web Console GUI 96