HP StorageWorks XP Remote Web Console Software - Manual (Page 73)

Description Item
Serial number of the connected storage system.
Serial
Number:
IP address of the connected storage system (SVP). IP Address:
Device name of the connected storage system. The Remote Web Console user can change
the device name with the modify mode. You must enter a device name using up to 180
alphanumeric characters (ASCII codes), except for some symbols, such as ", \, ;, :, ,, *, ?, <,
>, |, /, ^, &, and %. You can also use a space, except for before and after the device name.
If you enter a space before or after the device name, an error occurs when you click Apply.
The device name is required to use SNMP Agent. For detailed information on SNMP, see the
HP StorageWorks XP24000/XP20000 SNMP Agent Reference Guide.
NOTE:
Make sure to document the device name, because the settings will be cleared when the
SVP is replaced.
Name:
Contact information such as personnel and telephone number where you can inquire about
the connected storage system. The Remote Web Console user can change the contact
information with the modify mode. You must enter the contact information using up to 180
alphanumeric characters (ASCII codes), except for some symbols, such as ", \, ;, :, ,, *, ?, <,
>, |, /, ^, &, and %. You can also use a space, except for before and after the contact
information. If you enter a space before or after the contact information, an error occurs when
you click Apply. The contact name is required to use SNMP Agent. For detailed information
on SNMP, see the HP StorageWorks XP24000/XP20000 SNMP Agent Reference Guide.
NOTE:
Make sure to document the contact name, because the settings will be cleared when
the SVP is replaced.
Contact:
Location of the connected storage system. The Remote Web Console user can change the
device location with the modify mode. You must enter a device location using up to 180
alphanumeric characters (ASCII codes), except for some symbols, such as ", \, ;, :, ,, *, ?, <,
>, |, /, ^, &, and %. You can also use a space, except for before and after the location. If
you enter a space before or after the location, an error occurs when you click Apply. The
device location is required to use SNMP Agent. For detailed information on SNMP, see the
HP StorageWorks XP24000/XP20000 SNMP Agent Reference Guide.
NOTE:
Make sure to document the device location, because the settings will be cleared when
the SVP is replaced.
Location:
Provides the firmware version information for the connected storage system:
• Main: Version of the microcode installed in the connected storage system.
• SVP: Version of the Remote Web Console Java application program installed in the SVP
of the connected subsystem.
• Server: Version of the RMI server installed in the SVP of the connected storage system.
Firmware
Version:
Product name and visual image (picture) of the connected storage system. Device View:
XP24000/XP20000 Remote Web Console User's Guide 73