HP StorageWorks XP Remote Web Console Software - Manual (Page 87)

Description Item
You can set an IP address and a port number for the secondary syslog server. Once
you set Output to Secondary Server to Enable, IP and Port become available. For both
IP and Port , the defaults have been entered, so change them as needed. The
restriction for the available values is the same as that of Primary Server Setting.
Secondary Server Set-
ting:
You can name the storage system that transfers the audit log to syslog servers, so that
you can identify the storage system. You can enter 32 one-byte characters at the
maximum. Available characters are alphabetic (A-Z and a-z), numeric (0-9), and
symbols (! " # $ % & ' ( ) = - ~ ^ | \ { } [ ] @ ` : ; * + _ ? / < > .). However, a comma
(,) and a space cannot be used.
Location Identification
Name
You can set whether to transfer the detailed information for the audit log file to the
syslog server. To transfer the detailed information to the syslog server, select Enable.
If you do not want to transfer the detailed information, select Disable.
In the syslog file that is stored in the SVP, the detailed information is always stored
regardless of this setting.
Output Detailed In-
formation:
Click Download to download the syslog file to the Remote Web Console computer. Download Syslog:
Makes all the changes or settings effective. This button is available only when you
are in the modify mode.
Apply:
Cancels the changes or settings. This button is available only when you are in the
modify mode.
Cancel:
Audit Log Transfer Window
The Audit Log Transfer window allows you to configure FTP servers and manually transfer the audit
log information file to the FTP servers.
Only the storage administrator can configure FTP servers or manually transfer the audit log file to the
FTP servers. Before an FTP server can be configured, the Audit Log Administrator Role needs to be
set to Modify for the storage administrator's user account. If the Audit Log Administrator Role is set
to View, the storage administrator can view the Audit Log Transfer window, but cannot change settings
of the Audit Log Transfer window or manually transfer the audit log file to the FTP servers.
NOTE:
A SIM occurs to notify a storage administrator of the failure of an FTP transfer. This can occur when
the audit log file is not successfully transferred to any FTP server due to the failures of either the FTP
server or LAN. You can view the SIM in the Status Window. The reference code for a failed FTP
transfer is 7C0300. If a SIM occurs, perform the following operations:
• Resolve the error condition on the FTP server or LAN, and then manually transfer the audit log file
by clicking Transfer in the Audit Log Transfer window. After that, complete the SIM in the Audit
Log Transfer window.
• If the error condition cannot be resolved, download the audit log file to the Remote Web Console
computer by clicking Audit:Warning or Audit:Wraparound in the Remote Web Console main
window.
XP24000/XP20000 Remote Web Console User's Guide 87