HP StorageWorks XP Remote Web Console Software - Manual (Page 88)

To open the Audit Log Transfer window, log in to the Remote Web Console, and then select Go,
Security and Audit Log Transfer from the menu bar of the Remote Web Console main window. Storage
partition administrators cannot display the Audit Log Transfer window.
Figure 35 Audit Log Transfer Window
The Audit Log Transfer window has the following features:
Description Item
You can specify whether to transfer the audit log file to the primary FTP server. To
transfer the file, select Enable. To not transfer the file, select Disable. Output to Primary Serv-
er
You can set an IP address for the primary FTP server. Once you set Output to Primary
Server to Enable, IP becomes available. The default IP address has been entered,
so change it as needed.
For IP address set either IPv4 or IPv6. If your SVP is Windows XP, only IPv4 address
is available.
• To set an IPv4 address, select IPv4. For IP, enter four integers in the range of 0
to 255. For example, enter
nnn . nnn . nnn . nnn , where n is a number. Only enter
numbers. Do not enter the intervening periods.
• To set an IPv6 address, select IPv6. For IP, enter eight hexadecimal numbers in
the range of 0 to FFFF. For example, enter
hhhh : hhhh : hhhh : hhhh : hhhh : hh-
hh : hhhh : hhhh , where h is a hexadecimal number. Do not enter the intervening
colons.
Primary Server Setting
You can set UserID and Password to log into the primary FTP server. You can enter
up to 256 alphanumeric characters and symbols (ASCII codes) for user ID and
password.
Primary Server Login
User
Using the Remote Web Console GUI 88